main
History Download
Ray ina159aidgkr: specified limits as data (metadata.characteristics, 41 rows from the datasheet) b488841

INA159AIDGKR

Texas Instruments · Differential Amplifiers · VSSOP-8

INA159AIDGKR from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 REF 1 passive Reference input 1 of the on-chip two-resistor reference divider, typically grounded or tied to VREF for mid-supply biasing; pin voltage must stay within (V−) − 0.5V to (V+) + 0.5V.
2 −IN input Inverting signal input of the difference amplifier (gain 0.2), rated for ±30V maximum input voltage.
3 +IN input Noninverting signal input of the difference amplifier (gain 0.2), rated for ±30V maximum input voltage.
4 V− power_in Negative supply, or ground in single-supply operation; total supply range is +1.8V to +5.5V.
5 SENSE input Output sense pin of the feedback network, connected to OUT in the typical application; pin voltage must stay within (V−) − 0.5V to (V+) + 0.5V.
6 OUT output Amplifier output with continuous short-circuit protection and ±60mA continuous current limit.
7 V+ power_in Positive supply, operating range +1.8V to +5.5V total supply, with a 0.1µF bypass capacitor placed closely across the supply pins.
8 REF 2 passive Reference input 2 of the on-chip two-resistor reference divider, typically connected to VREF; pin voltage must stay within (V−) − 0.5V to (V+) + 0.5V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VSSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Offset voltage, initial (RTO) VOS -500 100 500 µV VS = ±2.5V, Reference and Input Pins Grounded 3
Offset voltage drift vs temperature -1.5 1.5 µV/°C 3
Offset voltage vs power supply (PSRR) PSRR -100 20 100 µV/V VS = ±0.9V to ±2.75V 3
Reference divider accuracy -0.024 0.002 0.024 % 3
Reference divider accuracy over temperature -0.002 0.002 % over temperature 3
Common-mode rejection ratio CMRR 80 96 dB VCM = −10V to +10V, RS = 0Ω 3
Common-mode rejection ratio over temperature CMRR 94 dB over temperature 3
Gain error -0.024 0.005 0.024 % VREF2 = 4.096V, RL connected to GND, (VIN+) − (VIN−) = −10V to +10V, VCM = 0V 3
Gain error vs temperature -1 1 ppm/°C VREF2 = 4.096V, RL connected to GND, (VIN+) − (VIN−) = −10V to +10V, VCM = 0V 3
Nonlinearity -0.0002 0.0002 % of FS VREF2 = 4.096V, RL connected to GND, (VIN+) − (VIN−) = −10V to +10V, VCM = 0V 3
Output voltage, positive (headroom below (V+)) 0.1 0.02 V VREF2 = 4.096V, RL connected to GND 3
Output voltage, negative (headroom above (V−)) 0.01 0.048 V VREF2 = 4.096V, RL connected to GND 3
Output current limit, continuous to common -60 60 mA Continuous to common 3
Quiescent current IQ 1.1 1.5 mA IO = 0mA, VS = ±2.5V, Reference and Input Pins Grounded 3
Operating voltage range 1.8 5.5 V 3
Specified temperature range -40 125 °C 3
Operating temperature range -40 150 °C 3
Storage temperature range -65 150 °C 3
Supply voltage 5.5 V 2
Signal input terminals (−IN and +IN) voltage -30 30 V 2
Reference (REF 1, REF 2) and sense pins current -10 10 mA 2
Reference and sense pins voltage, relative to (V−) and (V+) -0.5 0.5 V 2
Operating temperature (absolute maximum) -40 150 °C 2
Storage temperature (absolute maximum) -65 150 °C 2
Junction temperature (absolute maximum) 150 °C 2
ESD rating, Human Body Model 4000 V 2
ESD rating, Charged Device Model 1000 V 2
Differential input impedance 240 kΩ 3
Common-mode input impedance 60 kΩ 3
Common-mode voltage range, positive VCM+ 17.5 V 3
Common-mode voltage range, negative VCM− -12.5 V 3
Output voltage noise, 0.1 Hz to 10 Hz 10 µVPP f = 0.1Hz to 10Hz 3
Output voltage noise spectral density 30 nV/√Hz f = 10kHz 3
Gain, initial G 0.2 V/V VREF2 = 4.096V, RL connected to GND, (VIN+) − (VIN−) = −10V to +10V, VCM = 0V 3
Open-loop output impedance RO 110 Ω f = 1MHz, IO = 0 3
Small-signal bandwidth (−3 dB) 1.5 MHz 3
Slew rate SR 15 V/µs 3
Settling time, 0.01% tS 1 µs 4V output step, CL = 100pF 3
Overload recovery time 250 ns 50% overdrive 3
Specified supply voltage VS 5 V 3
Thermal resistance, junction-to-ambient (MSOP-8) θJA 150 °C/W MSOP-8 surface-mount 3

CAD (KiCad official)

  • Symbol: INA159AIDGKR
  • Footprint: Package_SO:VSSOP-8_2.3x2mm_P0.5mm
  • 3D model: VSSOP-8 (KiCad packages3D, STEP)
  • 3D model files: ina159aidgkr-etched.step / ina159aidgkr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina159aidgkr.step / ina159aidgkr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (19 pp, sha256 5508981888a60f2d, retrieved 2026-10-01, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF