main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina155ua: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina155ua: viewers · Ray
ina155ua-etched.fit.json ina155ua: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina155ua-etched.glb ina155ua: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
ina155ua-etched.step ina155ua: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
ina155ua-hero.glb ina155ua: hero from the plain model · Ray
ina155ua-hero.overlay.json ina155ua: hero from the plain model · Ray
ina155ua.glb Publish 0.1.0 · Ray
ina155ua.kicad_mod Publish 0.1.0 · Ray
ina155ua.kicad_sym Publish 0.1.0 · Ray
ina155ua.lbr Publish 0.1.0 · Ray
ina155ua.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/ina155ua · Ray

INA155UA

Texas Instruments · Instrumentation Amplifiers · SOIC-8

INA155UA from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RG passive Gain-setting pin; left open with pin 8 sets G=10, tied to pin 8 sets G=50, or an external resistor between pins 1 and 8 sets gain per G = 10 + 400kΩ/(10kΩ + RG).
2 VIN- power_in Inverting instrumentation-amplifier input; safe input voltage range is (V-) - 0.5V to (V+) + 0.5V with input current limited to 10mA.
3 VIN+ power_in Noninverting instrumentation-amplifier input; safe input voltage range is (V-) - 0.5V to (V+) + 0.5V with input current limited to 10mA.
4 V- power_in Negative power supply pin; supply voltage V+ to V- must not exceed 7.5V absolute maximum, ground reference in single-supply operation.
5 Ref input Output reference terminal, normally set to VS/2 through a low-impedance connection; sets the output offset level and directly affects common-mode rejection (a 200Ω series impedance degrades CMRR to about 80dB).
6 VOUT output Rail-to-rail amplifier output; swings to within 5mV (typ) / 10mV (max) of either supply rail into a 10kΩ load, with ±50mA short-circuit current to ground.
7 V+ power_in Positive power supply pin; specified operating range is +2.7V to +5.5V (operating range +2.5V to +6V), quiescent current 1.7mA typ/2.1mA max.
8 RG passive Gain-setting pin; left open with pin 1 sets G=10, tied to pin 1 sets G=50, or an external resistor between pins 1 and 8 sets gain per G = 10 + 400kΩ/(10kΩ + RG).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

CAD (KiCad official)

  • Symbol: INA155UA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ina155ua-etched.step / ina155ua-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina155ua.step / ina155ua.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (17 pp, sha256 477f3b4451cfbf8f, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF