← Commit history

Initial commit: component/ina155ua

Ray ·d556d34c0d ·
2 files changed +187
README.mdadded+44
@@ -0,0 +1,44 @@+# INA155UA++**Texas Instruments** · Instrumentation Amplifiers · SOIC-8++INA155UA from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | RG | passive | Gain-setting pin; left open with pin 8 sets G=10, tied to pin 8 sets G=50, or an external resistor between pins 1 and 8 sets gain per G = 10 + 400kΩ/(10kΩ + RG). |+| 2 | VIN- | power_in | Inverting instrumentation-amplifier input; safe input voltage range is (V-) - 0.5V to (V+) + 0.5V with input current limited to 10mA. |+| 3 | VIN+ | power_in | Noninverting instrumentation-amplifier input; safe input voltage range is (V-) - 0.5V to (V+) + 0.5V with input current limited to 10mA. |+| 4 | V- | power_in | Negative power supply pin; supply voltage V+ to V- must not exceed 7.5V absolute maximum, ground reference in single-supply operation. |+| 5 | Ref | input | Output reference terminal, normally set to VS/2 through a low-impedance connection; sets the output offset level and directly affects common-mode rejection (a 200Ω series impedance degrades CMRR to about 80dB). |+| 6 | VOUT | output | Rail-to-rail amplifier output; swings to within 5mV (typ) / 10mV (max) of either supply rail into a 10kΩ load, with ±50mA short-circuit current to ground. |+| 7 | V+ | power_in | Positive power supply pin; specified operating range is +2.7V to +5.5V (operating range +2.5V to +6V), quiescent current 1.7mA typ/2.1mA max. |+| 8 | RG | passive | Gain-setting pin; left open with pin 1 sets G=10, tied to pin 1 sets G=50, or an external resistor between pins 1 and 8 sets gain per G = 10 + 400kΩ/(10kΩ + RG). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Amplifiers/Comparators |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `INA155UA`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `ina155ua-etched.step` / `ina155ua-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina155ua.step` / `ina155ua.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina155) (17 pp, sha256 `477f3b4451cfbf8f`, retrieved 2026-09-24, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ina155ua-datasheet.pdf)
page.jsonadded+143
@@ -0,0 +1,143 @@+{+  "slug": "ina155ua",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments Instrumentation Amplifiers, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "amplifiers-comparators",+    "ina155ua",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "ina155ua.kicad_sym",+    "ina155ua.kicad_mod",+    "ina155ua.glb",+    "ina155ua.step",+    "ina155ua.lbr",+    "docs/hero.png",+    "docs/ina155ua-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "INA155UA",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Amplifiers/Comparators",+    "subcategory": "Instrumentation Amplifiers",+    "datasheet": "https://www.ti.com/cn/lit/gpn/ina155",+    "parts": {+      "symbol": "ina155ua.kicad_sym",+      "footprint": "ina155ua.kicad_mod",+      "model_3d": "ina155ua-etched.glb",+      "model_3d_plain": "ina155ua.glb",+      "model_3d_step": "ina155ua-etched.step",+      "model_3d_step_plain": "ina155ua.step",+      "lbr": "ina155ua.lbr"+    },+    "distributor_links": {+      "lcsc": "C1346065"+    },+    "pins": [+      {+        "number": "1",+        "name": "RG",+        "type": "passive",+        "description": "Gain-setting pin; left open with pin 8 sets G=10, tied to pin 8 sets G=50, or an external resistor between pins 1 and 8 sets gain per G = 10 + 400kΩ/(10kΩ + RG)."+      },+      {+        "number": "2",+        "name": "VIN-",+        "type": "power_in",+        "description": "Inverting instrumentation-amplifier input; safe input voltage range is (V-) - 0.5V to (V+) + 0.5V with input current limited to 10mA."+      },+      {+        "number": "3",+        "name": "VIN+",+        "type": "power_in",+        "description": "Noninverting instrumentation-amplifier input; safe input voltage range is (V-) - 0.5V to (V+) + 0.5V with input current limited to 10mA."+      },+      {+        "number": "4",+        "name": "V-",+        "type": "power_in",+        "description": "Negative power supply pin; supply voltage V+ to V- must not exceed 7.5V absolute maximum, ground reference in single-supply operation."+      },+      {+        "number": "5",+        "name": "Ref",+        "type": "input",+        "description": "Output reference terminal, normally set to VS/2 through a low-impedance connection; sets the output offset level and directly affects common-mode rejection (a 200Ω series impedance degrades CMRR to about 80dB)."+      },+      {+        "number": "6",+        "name": "VOUT",+        "type": "output",+        "description": "Rail-to-rail amplifier output; swings to within 5mV (typ) / 10mV (max) of either supply rail into a 10kΩ load, with ±50mA short-circuit current to ground."+      },+      {+        "number": "7",+        "name": "V+",+        "type": "power_in",+        "description": "Positive power supply pin; specified operating range is +2.7V to +5.5V (operating range +2.5V to +6V), quiescent current 1.7mA typ/2.1mA max."+      },+      {+        "number": "8",+        "name": "RG",+        "type": "passive",+        "description": "Gain-setting pin; left open with pin 1 sets G=10, tied to pin 1 sets G=50, or an external resistor between pins 1 and 8 sets gain per G = 10 + 400kΩ/(10kΩ + RG)."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "1/8 pins cited to the wrong page (name found elsewhere): ['2:VIN+@p4']"+        ],+        "pages_sent": 17,+        "cost_usd": 0.2429,+        "at": "2026-09-24T00:57:48"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/ina155",+        "pages": 17,+        "sha256": "477f3b4451cfbf8f",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 8,+        "described": 8,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file