← Commit history

ina155ua: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)

Ray ·aa061c3b1e · ·parent e2dd9d8
2 files changed +88−8
package.json+46−6
@@ -53,7 +53,7 @@         "number": "1",         "name": "RG",         "type": "passive",-        "description": "Gain-setting pin; left open with pin 8 sets G=10, tied to pin 8 sets G=50, or an external resistor between pins 1 and 8 sets gain per G = 10 + 400k\u03a9/(10k\u03a9 + RG)."+        "description": "Gain-setting pin; left open with pin 8 sets G=10, tied to pin 8 sets G=50, or an external resistor between pins 1 and 8 sets gain per G = 10 + 400kΩ/(10kΩ + RG)."       },       {         "number": "2",@@ -77,13 +77,13 @@         "number": "5",         "name": "Ref",         "type": "input",-        "description": "Output reference terminal, normally set to VS/2 through a low-impedance connection; sets the output offset level and directly affects common-mode rejection (a 200\u03a9 series impedance degrades CMRR to about 80dB)."+        "description": "Output reference terminal, normally set to VS/2 through a low-impedance connection; sets the output offset level and directly affects common-mode rejection (a 200Ω series impedance degrades CMRR to about 80dB)."       },       {         "number": "6",         "name": "VOUT",         "type": "output",-        "description": "Rail-to-rail amplifier output; swings to within 5mV (typ) / 10mV (max) of either supply rail into a 10k\u03a9 load, with \u00b150mA short-circuit current to ground."+        "description": "Rail-to-rail amplifier output; swings to within 5mV (typ) / 10mV (max) of either supply rail into a 10kΩ load, with ±50mA short-circuit current to ground."       },       {         "number": "7",@@ -95,7 +95,7 @@         "number": "8",         "name": "RG",         "type": "passive",-        "description": "Gain-setting pin; left open with pin 1 sets G=10, tied to pin 1 sets G=50, or an external resistor between pins 1 and 8 sets gain per G = 10 + 400k\u03a9/(10k\u03a9 + RG)."+        "description": "Gain-setting pin; left open with pin 1 sets G=10, tied to pin 1 sets G=50, or an external resistor between pins 1 and 8 sets gain per G = 10 + 400kΩ/(10kΩ + RG)."       }     ],     "provenance": {@@ -132,6 +132,46 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ina155ua.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ina155ua-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a9ca16c42f7feb75bafd48e6dc4d9119905312e96a8c1841ee799f59c45de53f",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   }-}\ No newline at end of file+}
page.json+42−2
@@ -117,7 +117,47 @@     "viewers": {       "symbol": "viewers/symbol.html",       "footprint": "viewers/footprint.html"-    }+    },+    "models_3d": [+      {+        "file": "ina155ua.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "ina155ua-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.0,+          4.9,+          1.75+        ],+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,+        "footprint_binding": "identity",+        "sha256": "a9ca16c42f7feb75bafd48e6dc4d9119905312e96a8c1841ee799f59c45de53f",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]   },   "metadata": {     "specs": {@@ -164,4 +204,4 @@   "visibility": {     "public": true   }-}\ No newline at end of file+}