main
Ray
ina146ua: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
f7ef0a6
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165
{
"slug": "ina146ua",
"version": "0.1.0",
"type": "component",
"description": "Texas Instruments Differential OpAmps, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",
"tags": [
"component",
"op-amp-cmp",
"ina146ua"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ina146ua.kicad_sym",
"ina146ua.kicad_mod",
"ina146ua.glb",
"ina146ua.step",
"ina146ua.lbr",
"docs/hero.png",
"docs/ina146ua-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ina146ua-etched.step"
],
"visibility": {
"public": true
},
"author": {
"name": "Ray"
},
"component": {
"mpn": "INA146UA",
"manufacturer": "Texas Instruments",
"package": "SOIC-8",
"pin_count": 8,
"category": "Differential OpAmps",
"parts": {
"symbol": "ina146ua.kicad_sym",
"footprint": "ina146ua.kicad_mod",
"model_3d": "ina146ua-etched.glb",
"model_3d_plain": "ina146ua.glb",
"model_3d_step": "ina146ua-etched.step",
"model_3d_step_plain": "ina146ua.step",
"lbr": "ina146ua.lbr"
},
"pins": [
{
"number": "1",
"name": "Ref",
"type": "input",
"description": "Reference input for the output amplifier A2. Voltage applied here is summed with the output signal and sets the output zero reference; source impedance should be less than 10Ω to preserve CMR. Also serves as an offset trim node (±15mV RTI adjustment range with the suggested trim network)."
},
{
"number": "2",
"name": "VIN-",
"type": "input",
"description": "Inverting differential signal input. Connects through internal R1 = 100kΩ (with R2 = 10kΩ feedback) to the A1 difference-amplifier inverting node; input differential/common-mode voltages up to ±100V are supported (voltage divider ratio 10:1). Input impedance to this pin is approximately 91.7kΩ differential."
},
{
"number": "3",
"name": "VIN+",
"type": "input",
"description": "Non-inverting differential signal input. Connects through internal R3 = 100kΩ to A1's non-inverting node (with R4 = 10kΩ to Ref); supports ±100V signal inputs. Differential input impedance approximately 110kΩ; common-mode impedance approximately 55kΩ."
},
{
"number": "4",
"name": "V-",
"type": "power_in",
"description": "Negative supply rail. Accepts dual supplies of ±2.25V to ±18V (operating down to ±1.35V) or single-supply operation with V+ up to 36V above V-. Bypass with 0.1µF close to the pin."
},
{
"number": "5",
"name": "RG",
"type": "passive",
"description": "Inverting input of the output buffer amplifier A2 and gain-set node. External resistors RG1 (to ground) and RG2 (to VO) set the overall gain G = 0.1 × (1 + RG2/RG1); RG2 = 10kΩ with RG1 open gives unity buffer gain (overall G = 0.1V/V). Design for approximately 10kΩ parallel resistance for proper bias current cancellation."
},
{
"number": "6",
"name": "VO",
"type": "output",
"description": "Output of the amplifier chain (A2 output). Delivers ±15mA short-circuit current, stable with up to 1000pF load capacitance. Output swing is (V-)+0.15V to (V+)-1V at RL=100kΩ (G=1)."
},
{
"number": "7",
"name": "V+",
"type": "power_in",
"description": "Positive supply rail. Accepts dual supplies of ±2.25V to ±18V or single supply 4.5V to 36V referenced to V-. Quiescent current is typically ±570µA. Bypass with 0.1µF close to the pin."
},
{
"number": "8",
"name": "VO1",
"type": "output",
"description": "Output of the first-stage difference amplifier A1, taken before the internal 10kΩ series resistor (R5) that drives A2's non-inverting input. Available for applications such as filtering (e.g. capacitor at VO1 forms an active filter with R5) or precision current-source configurations."
}
],
"provenance": {
"rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"distributor_links": {
"digikey": "INA146UA-ND",
"mouser": "595-INA146UA"
},
"distributor_check": {
"checked_at": "2026-10-05T19:01:41Z",
"source": "Component Ocean /api/assign-pns + lcsc_map",
"digikey": {
"pn": "INA146UA-ND",
"status": "found"
},
"mouser": {
"pn": "595-INA146UA",
"status": "found"
}
},
"models_3d": [
{
"file": "ina146ua.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ina146ua-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6,
4.9,
1.75
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "a5ab8f47ee2c1ae9cd257d56732d5bebad60c0815b98a80c45c9a95924421ceb",
"checked": "2026-10-07",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}