main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ina143ua: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ina143ua: viewers · Ray
ina143ua-etched.fit.json ina143ua: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ina143ua-etched.glb ina143ua: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
ina143ua-etched.step ina143ua: white body in tscircuit (pre-1.8 etch structure under an assembly instance); Ray 2026-10-19: black IC body wi… · Ray
ina143ua-hero.glb ina143ua: hero from the plain model · Ray
ina143ua-hero.overlay.json ina143ua: hero from the plain model · Ray
ina143ua.glb Publish 0.1.0 · Ray
ina143ua.kicad_mod Publish 0.1.0 · Ray
ina143ua.kicad_sym Publish 0.1.0 · Ray
ina143ua.lbr Publish 0.1.0 · Ray
ina143ua.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Initial commit: component/ina143ua · Ray

INA143UA

Texas Instruments · Differential Amplifiers · SOIC-8

INA143UA from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 Ref input Output reference terminal; a voltage summed with the output signal (source impedance must be < 10 Ω to maintain CMRR); normally grounded; offset adjustment range ±3 mV with the circuit shown in Figure 3.
2 -In input Inverting differential input; differential input impedance 20 kΩ typ; common-mode range (V-)+1.5 V to (V+)-1.5 V (min, VO = 0 V); source impedance mismatch >5 Ω degrades CMRR to ~86 dB.
3 +In input Non-inverting differential input; differential input impedance 20 kΩ typ; common-mode range (V-)+1.5 V to (V+)-1.5 V (min, VO = 0 V); CMRR 86 dB min (96 dB typ) at VS = ±15 V.
4 V- power_in Negative power supply; dual-supply range -2.25 V to -18 V; quiescent current 0.95 mA typ / 1.2 mA max per amplifier (IO = 0); absolute maximum V+ to V- = 36 V.
5 Sense input Output sense terminal; normally shorted to Output (pin 6) to close the feedback loop; can be driven at a remote load point for remote-sense operation; connects internally to the top of the 100 kΩ feedback resistor.
6 Output output Amplifier output; swing (V+)-1.5 V to (V-)+1 V with RL = 10 kΩ to GND; continuous short-circuit current limit -25/+32 mA; slew rate 5 V/µs typ; stable with capacitive loads up to 1000 pF.
7 V+ power_in Positive power supply; dual-supply range +2.25 V to +18 V, single-supply +4.5 V to +36 V; quiescent current 0.95 mA typ / 1.2 mA max per amplifier (IO = 0); θJA = 150 °C/W (SO-8).
8 NC unconnected No internal connection; leave unconnected per datasheet pin configuration.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

CAD (KiCad official)

  • Symbol: INA143UA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: ina143ua-etched.step / ina143ua-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina143ua.step / ina143ua.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (22 pp, sha256 8976aa5a4a2130c8, retrieved 2026-09-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF