← Commit history
README.mdadded+44@@ -0,0 +1,44 @@+# INA143UA++**Texas Instruments** · Differential Amplifiers · SOIC-8++INA143UA from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | Ref | input | Output reference terminal; a voltage summed with the output signal (source impedance must be < 10 Ω to maintain CMRR); normally grounded; offset adjustment range ±3 mV with the circuit shown in Figure 3. |+| 2 | -In | input | Inverting differential input; differential input impedance 20 kΩ typ; common-mode range (V-)+1.5 V to (V+)-1.5 V (min, VO = 0 V); source impedance mismatch >5 Ω degrades CMRR to ~86 dB. |+| 3 | +In | input | Non-inverting differential input; differential input impedance 20 kΩ typ; common-mode range (V-)+1.5 V to (V+)-1.5 V (min, VO = 0 V); CMRR 86 dB min (96 dB typ) at VS = ±15 V. |+| 4 | V- | power_in | Negative power supply; dual-supply range -2.25 V to -18 V; quiescent current 0.95 mA typ / 1.2 mA max per amplifier (IO = 0); absolute maximum V+ to V- = 36 V. |+| 5 | Sense | input | Output sense terminal; normally shorted to Output (pin 6) to close the feedback loop; can be driven at a remote load point for remote-sense operation; connects internally to the top of the 100 kΩ feedback resistor. |+| 6 | Output | output | Amplifier output; swing (V+)-1.5 V to (V-)+1 V with RL = 10 kΩ to GND; continuous short-circuit current limit -25/+32 mA; slew rate 5 V/µs typ; stable with capacitive loads up to 1000 pF. |+| 7 | V+ | power_in | Positive power supply; dual-supply range +2.25 V to +18 V, single-supply +4.5 V to +36 V; quiescent current 0.95 mA typ / 1.2 mA max per amplifier (IO = 0); θJA = 150 °C/W (SO-8). |+| 8 | NC | unconnected | No internal connection; leave unconnected per datasheet pin configuration. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SOIC-8 |+| Category | Amplifiers/Comparators |+| Pins | 8 |++## CAD (KiCad official)++- Symbol: `INA143UA`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOIC-8 (KiCad packages3D, STEP)+- 3D model files: `ina143ua-etched.step` / `ina143ua-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina143ua.step` / `ina143ua.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/ina143) (22 pp, sha256 `8976aa5a4a2130c8`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ina143ua-datasheet.pdf)
page.jsonadded+141@@ -0,0 +1,141 @@+{+ "slug": "ina143ua",+ "version": "0.1.0",+ "type": "component",+ "description": "Texas Instruments Differential Amplifiers, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "amplifiers-comparators",+ "ina143ua",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ina143ua.kicad_sym",+ "ina143ua.kicad_mod",+ "ina143ua.glb",+ "ina143ua.step",+ "ina143ua.lbr",+ "docs/hero.png",+ "docs/ina143ua-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "component": {+ "mpn": "INA143UA",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Amplifiers/Comparators",+ "subcategory": "Differential Amplifiers",+ "datasheet": "https://www.ti.com/cn/lit/gpn/ina143",+ "parts": {+ "symbol": "ina143ua.kicad_sym",+ "footprint": "ina143ua.kicad_mod",+ "model_3d": "ina143ua-etched.glb",+ "model_3d_plain": "ina143ua.glb",+ "model_3d_step": "ina143ua-etched.step",+ "model_3d_step_plain": "ina143ua.step",+ "lbr": "ina143ua.lbr"+ },+ "distributor_links": {+ "lcsc": "C545159"+ },+ "pins": [+ {+ "number": "1",+ "name": "Ref",+ "type": "input",+ "description": "Output reference terminal; a voltage summed with the output signal (source impedance must be < 10 Ω to maintain CMRR); normally grounded; offset adjustment range ±3 mV with the circuit shown in Figure 3."+ },+ {+ "number": "2",+ "name": "-In",+ "type": "input",+ "description": "Inverting differential input; differential input impedance 20 kΩ typ; common-mode range (V-)+1.5 V to (V+)-1.5 V (min, VO = 0 V); source impedance mismatch >5 Ω degrades CMRR to ~86 dB."+ },+ {+ "number": "3",+ "name": "+In",+ "type": "input",+ "description": "Non-inverting differential input; differential input impedance 20 kΩ typ; common-mode range (V-)+1.5 V to (V+)-1.5 V (min, VO = 0 V); CMRR 86 dB min (96 dB typ) at VS = ±15 V."+ },+ {+ "number": "4",+ "name": "V-",+ "type": "power_in",+ "description": "Negative power supply; dual-supply range -2.25 V to -18 V; quiescent current 0.95 mA typ / 1.2 mA max per amplifier (IO = 0); absolute maximum V+ to V- = 36 V."+ },+ {+ "number": "5",+ "name": "Sense",+ "type": "input",+ "description": "Output sense terminal; normally shorted to Output (pin 6) to close the feedback loop; can be driven at a remote load point for remote-sense operation; connects internally to the top of the 100 kΩ feedback resistor."+ },+ {+ "number": "6",+ "name": "Output",+ "type": "output",+ "description": "Amplifier output; swing (V+)-1.5 V to (V-)+1 V with RL = 10 kΩ to GND; continuous short-circuit current limit -25/+32 mA; slew rate 5 V/µs typ; stable with capacitive loads up to 1000 pF."+ },+ {+ "number": "7",+ "name": "V+",+ "type": "power_in",+ "description": "Positive power supply; dual-supply range +2.25 V to +18 V, single-supply +4.5 V to +36 V; quiescent current 0.95 mA typ / 1.2 mA max per amplifier (IO = 0); θJA = 150 °C/W (SO-8)."+ },+ {+ "number": "8",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection; leave unconnected per datasheet pin configuration."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.2",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.2",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-4-6",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 22,+ "cost_usd": 0.2046,+ "at": "2026-09-22T02:55:55"+ },+ "datasheet": {+ "url": "https://www.ti.com/cn/lit/gpn/ina143",+ "pages": 22,+ "sha256": "8976aa5a4a2130c8",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}