← Commit history
ina143ua: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+90−10
package.json+48−8@@ -53,19 +53,19 @@ "number": "1", "name": "Ref", "type": "input",- "description": "Output reference terminal; a voltage summed with the output signal (source impedance must be < 10 \u03a9 to maintain CMRR); normally grounded; offset adjustment range \u00b13 mV with the circuit shown in Figure 3."+ "description": "Output reference terminal; a voltage summed with the output signal (source impedance must be < 10 Ω to maintain CMRR); normally grounded; offset adjustment range ±3 mV with the circuit shown in Figure 3." }, { "number": "2", "name": "-In", "type": "input",- "description": "Inverting differential input; differential input impedance 20 k\u03a9 typ; common-mode range (V-)+1.5 V to (V+)-1.5 V (min, VO = 0 V); source impedance mismatch >5 \u03a9 degrades CMRR to ~86 dB."+ "description": "Inverting differential input; differential input impedance 20 kΩ typ; common-mode range (V-)+1.5 V to (V+)-1.5 V (min, VO = 0 V); source impedance mismatch >5 Ω degrades CMRR to ~86 dB." }, { "number": "3", "name": "+In", "type": "input",- "description": "Non-inverting differential input; differential input impedance 20 k\u03a9 typ; common-mode range (V-)+1.5 V to (V+)-1.5 V (min, VO = 0 V); CMRR 86 dB min (96 dB typ) at VS = \u00b115 V."+ "description": "Non-inverting differential input; differential input impedance 20 kΩ typ; common-mode range (V-)+1.5 V to (V+)-1.5 V (min, VO = 0 V); CMRR 86 dB min (96 dB typ) at VS = ±15 V." }, { "number": "4",@@ -77,19 +77,19 @@ "number": "5", "name": "Sense", "type": "input",- "description": "Output sense terminal; normally shorted to Output (pin 6) to close the feedback loop; can be driven at a remote load point for remote-sense operation; connects internally to the top of the 100 k\u03a9 feedback resistor."+ "description": "Output sense terminal; normally shorted to Output (pin 6) to close the feedback loop; can be driven at a remote load point for remote-sense operation; connects internally to the top of the 100 kΩ feedback resistor." }, { "number": "6", "name": "Output", "type": "output",- "description": "Amplifier output; swing (V+)-1.5 V to (V-)+1 V with RL = 10 k\u03a9 to GND; continuous short-circuit current limit -25/+32 mA; slew rate 5 V/\u00b5s typ; stable with capacitive loads up to 1000 pF."+ "description": "Amplifier output; swing (V+)-1.5 V to (V-)+1 V with RL = 10 kΩ to GND; continuous short-circuit current limit -25/+32 mA; slew rate 5 V/µs typ; stable with capacitive loads up to 1000 pF." }, { "number": "7", "name": "V+", "type": "power_in",- "description": "Positive power supply; dual-supply range +2.25 V to +18 V, single-supply +4.5 V to +36 V; quiescent current 0.95 mA typ / 1.2 mA max per amplifier (IO = 0); \u03b8JA = 150 \u00b0C/W (SO-8)."+ "description": "Positive power supply; dual-supply range +2.25 V to +18 V, single-supply +4.5 V to +36 V; quiescent current 0.95 mA typ / 1.2 mA max per amplifier (IO = 0); θJA = 150 °C/W (SO-8)." }, { "number": "8",@@ -130,6 +130,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "ina143ua.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ina143ua-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "d1d3d44282b5abffaae333aa2af5a098da2b0ec5f8eda2b574f510ee06c1f47d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -115,7 +115,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "ina143ua.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ina143ua-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.75+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "d1d3d44282b5abffaae333aa2af5a098da2b0ec5f8eda2b574f510ee06c1f47d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -163,4 +203,4 @@ "public": true }, "updated_at": "2026-09-24T22:32:34.377Z"-}+}