main
Ray
Publish 0.1.0
ffa33db
INA126E
Texas Instruments · Instrumentation OpAmps · VSSOP-8
INA126E from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RG | passive | Gain setting pin; for gains greater than 5, place a gain resistor between pin 1 and pin 8. |
| 2 | V-IN | power_in | Negative input. |
| 3 | V+IN | power_in | Positive input. |
| 4 | V- | power_in | Negative supply. |
| 5 | Ref | input | Reference input; this pin must be driven by a low impedance or connected to ground. |
| 6 | VO | output | Output. |
| 7 | V+ | power_in | Positive supply. |
| 8 | RG | passive | Gain setting pin; for gains greater than 5, place a gain resistor between pin 8 and pin 1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset voltage (RTI) | VOS | -250 | 100 | 250 | µV | 7 | |
| Offset voltage drift (RTI) | -3 | 0.5 | 3 | µV/°C | TA = -40°C to +85°C | 7 | |
| Power-supply rejection ratio (RTI) | PSRR | -15 | 5 | 15 | uV/V | VS = ±1.35V to ±18V | 7 |
| Common-mode voltage | VCM | -11.25 | 11.5 | 11.25 | V | 7 | |
| Common-mode rejection ratio (INA126U/E) | CMRR | 80 | 94 | dB | RS = 0Ω, VCM = ±11.25V | 7 | |
| Input bias current (INA126P/U/E) | IB | -25 | 10 | 25 | nA | 7 | |
| Input offset current (INA126P/U/E) | IOS | -2 | 0.5 | 2 | nA | 7 | |
| Gain | G | 5 | 10000 | V/V | 7 | ||
| Gain error (INA126P/U/E) | GE | -0.1 | 0.02 | 0.1 | % | G = 5, VO = ±14V | 7 |
| Gain error (INA126P/U/E) | GE | -0.5 | 0.2 | 0.5 | % | G = 100, VO = ±12V | 7 |
| Gain drift | -10 | 2 | 10 | ppm/°C | TA = -40°C to +85°C; G = 5 | 7 | |
| Gain drift | -100 | 25 | 100 | ppm/°C | TA = -40°C to +85°C; G = 100 | 7 | |
| Gain nonlinearity | -0.012 | 0.002 | 0.012 | % | G = 100, VO = ±14V | 7 | |
| Short-circuit current | ISC | -5 | 5 | mA | Continuous to VS / 2 | 7 | |
| Load capacitance | CL | 1000 | pF | Stable operation | 7 | ||
| Quiescent current (per channel) | IQ | 175 | 200 | µA | IO = 0mA | 7 | |
| Supply voltage, single-supply | VS | 2.7 | 30 | 36 | V | Single-supply | 5 |
| Supply voltage, dual-supply | VS | 1.35 | 15 | 18 | V | Dual-supply | 5 |
| Specified temperature | TA | -40 | 85 | °C | Specified temperature | 5 | |
| Supply voltage, dual supply | VS | 18 | V | Dual supply, VS = (V+), (V-) | 5 | ||
| Supply voltage, single supply | VS | 36 | V | Single supply, VS = (V+), (V-) | 5 | ||
| Input signal current | 10 | mA | 5 | ||||
| Operating temperature | TA | -55 | 125 | °C | 5 | ||
| Storage temperature | Tstg | -55 | 125 | °C | 5 | ||
| Lead temperature | 300 | °C | soldering, 10s | 5 | |||
| Junction-to-ambient thermal resistance (DGK, VSSOP-8) | RθJA | 167.8 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance (DGK, VSSOP-8) | RθJC(top) | 60.9 | °C/W | 6 | |||
| Junction-to-board thermal resistance (DGK, VSSOP-8) | RθJB | 88.9 | °C/W | 6 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
INA126E - Footprint:
Package_SO:VSSOP-8_3x3mm_P0.65mm - 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ina126e-etched.step/ina126e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina126e.step/ina126e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (40 pp, sha256
87a7363f8c1ac57e, retrieved 2026-11-18) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# INA126E
**Texas Instruments** · Instrumentation OpAmps · VSSOP-8
INA126E from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RG | passive | Gain setting pin; for gains greater than 5, place a gain resistor between pin 1 and pin 8. |
| 2 | V-IN | power_in | Negative input. |
| 3 | V+IN | power_in | Positive input. |
| 4 | V- | power_in | Negative supply. |
| 5 | Ref | input | Reference input; this pin must be driven by a low impedance or connected to ground. |
| 6 | VO | output | Output. |
| 7 | V+ | power_in | Positive supply. |
| 8 | RG | passive | Gain setting pin; for gains greater than 5, place a gain resistor between pin 8 and pin 1. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Offset voltage (RTI) | VOS | -250 | 100 | 250 | µV | | 7 |
| Offset voltage drift (RTI) | | -3 | 0.5 | 3 | µV/°C | TA = -40°C to +85°C | 7 |
| Power-supply rejection ratio (RTI) | PSRR | -15 | 5 | 15 | uV/V | VS = ±1.35V to ±18V | 7 |
| Common-mode voltage | VCM | -11.25 | 11.5 | 11.25 | V | | 7 |
| Common-mode rejection ratio (INA126U/E) | CMRR | 80 | 94 | | dB | RS = 0Ω, VCM = ±11.25V | 7 |
| Input bias current (INA126P/U/E) | IB | -25 | 10 | 25 | nA | | 7 |
| Input offset current (INA126P/U/E) | IOS | -2 | 0.5 | 2 | nA | | 7 |
| Gain | G | 5 | | 10000 | V/V | | 7 |
| Gain error (INA126P/U/E) | GE | -0.1 | 0.02 | 0.1 | % | G = 5, VO = ±14V | 7 |
| Gain error (INA126P/U/E) | GE | -0.5 | 0.2 | 0.5 | % | G = 100, VO = ±12V | 7 |
| Gain drift | | -10 | 2 | 10 | ppm/°C | TA = -40°C to +85°C; G = 5 | 7 |
| Gain drift | | -100 | 25 | 100 | ppm/°C | TA = -40°C to +85°C; G = 100 | 7 |
| Gain nonlinearity | | -0.012 | 0.002 | 0.012 | % | G = 100, VO = ±14V | 7 |
| Short-circuit current | ISC | -5 | | 5 | mA | Continuous to VS / 2 | 7 |
| Load capacitance | CL | | | 1000 | pF | Stable operation | 7 |
| Quiescent current (per channel) | IQ | | 175 | 200 | µA | IO = 0mA | 7 |
| Supply voltage, single-supply | VS | 2.7 | 30 | 36 | V | Single-supply | 5 |
| Supply voltage, dual-supply | VS | 1.35 | 15 | 18 | V | Dual-supply | 5 |
| Specified temperature | TA | -40 | | 85 | °C | Specified temperature | 5 |
| Supply voltage, dual supply | VS | | | 18 | V | Dual supply, VS = (V+), (V-) | 5 |
| Supply voltage, single supply | VS | | | 36 | V | Single supply, VS = (V+), (V-) | 5 |
| Input signal current | | | | 10 | mA | | 5 |
| Operating temperature | TA | -55 | | 125 | °C | | 5 |
| Storage temperature | Tstg | -55 | | 125 | °C | | 5 |
| Lead temperature | | | | 300 | °C | soldering, 10s | 5 |
| Junction-to-ambient thermal resistance (DGK, VSSOP-8) | RθJA | | 167.8 | | °C/W | | 6 |
| Junction-to-case (top) thermal resistance (DGK, VSSOP-8) | RθJC(top) | | 60.9 | | °C/W | | 6 |
| Junction-to-board thermal resistance (DGK, VSSOP-8) | RθJB | | 88.9 | | °C/W | | 6 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `INA126E`
- Footprint: `Package_SO:VSSOP-8_3x3mm_P0.65mm`
- 3D model: VSSOP-8, generated on the KiCad land (body 3 x 3 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `ina126e-etched.step` / `ina126e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina126e.step` / `ina126e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ina126.pdf) (40 pp, sha256 `87a7363f8c1ac57e`, retrieved 2026-11-18)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/ina126e-datasheet.pdf)