main
History Download
Ray Publish 0.1.0 d5b7613

INA122UA

Texas Instruments · Instrumentation Amplifiers · SOP-8

INA122UA from Texas Instruments, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RG passive Gain setting pin; place a gain resistor between pin 1 and pin 8.
2 -IN input Negative (inverting) input.
3 +IN input Positive (noninverting) input.
4 -VS power_in Negative (lowest) power supply.
5 REF input Reference input; this pin must be driven by a low-impedance source.
6 OUT output Output.
7 +VS power_in Positive (highest) power supply.
8 RG passive Gain setting pin; place a gain resistor between pin 1 and pin 8.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Offset voltage (RTI) VOS -500 500 µV TA = 25°C, VS = +5V, RL = 20kΩ to VS/2, VREF = 0V, INA122PA, UA 6
Offset voltage drift (RTI) -5 5 µV/℃ TA = -40°C to +85°C, INA122PA, UA 6
Input offset current IOS -5 5 nA VCM = VS / 2, INA122PA, UA 6
Input offset current drift -40 40 pA/℃ TA = -40°C to +85°C 6
Input bias current IB -50 -10 nA VCM = VS / 2, INA122PA, UA 6
Power-supply rejection ratio (RTI) PSRR 10 100 µV/V VS = 2.2V to 36V, INA122PA, UA 6
Operating input range VCM 0 3.4 V 6
Common-mode rejection ratio (RTI) CMRR 76 96 dB VCM = 0V to 3.4V, INA122PA, UA 6
Gain G 5 10000 V/V 7
Gain error GE -0.15 0.15 % G = 5, VO = ±10V, INA122PA, UA 7
Gain error GE -1 1 % G = 100, VO = ±10V, INA122PA, UA 7
Gain vs temperature -10 10 ppm/°C G = 5 7
Gain vs temperature -100 100 ppm/°C G = 100 7
Gain nonlinearity -0.024 0.024 % of FSR G = 100, VO = -14.85V to +14.9V, INA122PA, UA 7
Load capacitance stability 1000 pF 7
Short-circuit current sourcing ISC 3 mA Continuous to VS / 2, CSO: SHE 7
Short-circuit current sourcing ISC 30 mA Continuous to VS / 2, CSO: TID 7
Short-circuit current sinking ISC -30 mA Continuous to VS / 2 7
Quiescent current IQ 60 85 µA IO = 0A 7
Supply voltage VS 2.2 36 V VS = (V+), (V-) 4
Specified temperature -40 85 °C 4
Supply voltage, single supply VS 36 V Single supply, VS = (V+), 0V 4
Supply voltage, dual supply VS 18 V Dual supply, VS = (V+), (V-) 4
Signal input current 5 mA 4
Operating temperature TA -40 125 °C 4
Storage temperature Tstg -55 125 °C 4
Lead temperature (soldering, 10s) 300 °C Soldering, 10s 4
Junction-to-ambient thermal resistance RθJA 129.2 ℃/W D (SOIC) 5
Junction-to-case (top) thermal resistance RθJC(top) 69.1 ℃/W D (SOIC) 5
Junction-to-board thermal resistance RθJB 76.8 ℃/W D (SOIC) 5
Junction-to-top characterization parameter ψJT 16.1 ℃/W D (SOIC) 5
Junction-to-board characterization parameter ψJB 75.8 ℃/W D (SOIC) 5
Bandwidth, -3dB BW 100 kHz G = 5 7
Bandwidth, -3dB BW 3.5 kHz G = 100 7
Bandwidth, -3dB BW 0.9 kHz G = 500 7
Slew rate rising SR 0.08 V/µs G = 5, VO = ±10V, CSO: SHE 7
Slew rate rising SR 0.125 V/µs G = 5, VO = ±10V, CSO: TID 7
Slew rate falling SR 0.12 V/µs G = 5, VO = ±10V 7
Overload recovery 22 µs 50 % overdrive 7
Settling time 0.01% tS 350 µs G = 5 7
Settling time 0.01% tS 450 µs G = 100 7
Settling time 0.01% tS 1800 µs G = 500 7
Voltage noise (RTI) eNI 110 nV/√Hz f = 10Hz 6
Voltage noise (RTI) eNI 100 nV/√Hz f = 100Hz 6
Voltage noise (RTI) eNI 60 nV/√Hz f = 1kHz 6
Voltage noise (RTI), peak-to-peak eNI 2.7 µVPP fB = 0.1Hz to 10Hz 6
Current noise (RTI) iNI 80 fA/√Hz f = 1kHz 6
Current noise (RTI), peak-to-peak iNI 5 pAPP fB = 0.1Hz to 10Hz 6

CAD (KiCad official)

  • Symbol: INA122UA
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: ina122ua-etched.step / ina122ua-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina122ua.step / ina122ua.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (34 pp, sha256 3691b8c6247ada8d, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF