main
Ray
Publish 0.1.0
c23d572
INA122U
Texas Instruments · Instrumentation Amplifiers · SOIC-8
INA122U from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RG | passive | Gain-setting pin; a single external gain resistor connects between pin 1 and pin 8, with gain G = 5 + 200kΩ / RG. |
| 2 | -IN | input | Negative (inverting) input; signal input voltage is limited to (V-) - 0.3 V to (V+) + 0.3 V and input current to 5 mA. |
| 3 | +IN | input | Positive (noninverting) input; signal input voltage is limited to (V-) - 0.3 V to (V+) + 0.3 V and input current to 5 mA. |
| 4 | -VS | power_in | Negative (lowest) power supply; the supply range is 2.2 V to 36 V single supply, or ±18 V dual supply maximum. |
| 5 | REF | input | Reference input that must be driven by a low-impedance source, since series resistance (for example 10 Ω) degrades common-mode rejection to about 80 dB. |
| 6 | OUT | output | Output; the output is referred to the REF pin, output short-circuit is continuous to VS/2, and load capacitance stability is specified to 1000 pF. |
| 7 | +VS | power_in | Positive (highest) power supply; the supply range is 2.2 V to 36 V single supply, with absolute maximum 36 V (±18 V dual). |
| 8 | RG | passive | Gain-setting pin; the other end of the same gain resistor connects here, paired with pin 1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 2.2 | 36 | V | VS = (V+), (V-) | 4 | |
| Specified temperature | -40 | 85 | °C | 4 | |||
| Supply voltage, dual supply | VS | -18 | 18 | V | Dual supply, VS = (V+), (V-) | 4 | |
| Supply voltage, single supply | VS | 36 | V | Single supply, VS = (V+), 0V | 4 | ||
| Signal input current | 5 | mA | 4 | ||||
| Operating temperature | TA | -40 | 125 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 125 | °C | 4 | ||
| Lead temperature (soldering, 10s) | 300 | °C | soldering, 10s | 4 | |||
| Offset voltage (RTI) | VOS | -250 | 100 | 250 | µV | 6 | |
| Offset voltage drift (RTI) | -3 | 1 | 3 | µV/℃ | TA = -40°C to +85°C | 6 | |
| Power-supply rejection ratio (RTI) | PSRR | 10 | 30 | µV/V | VS = 2.2V to 36V | 6 | |
| Operating input range | VCM | 0 | 3.4 | V | 6 | ||
| Common-mode rejection ratio (RTI) | CMRR | 83 | 96 | dB | VCM = 0V to 3.4V | 6 | |
| Input bias current | IB | -10 | -25 | nA | VCM = VS / 2 | 6 | |
| Input offset current | IOS | -2 | 1 | 2 | nA | VCM = VS / 2 | 6 |
| Gain | G | 5 | 10000 | V/V | 7 | ||
| Gain error | GE | -0.1 | 0.05 | 0.1 | % | G = 5, VO = ±10V | 7 |
| Gain error | GE | -0.5 | 0.3 | 0.5 | % | G = 100, VO = ±10V | 7 |
| Gain vs temperature | -10 | 5 | 10 | ppm/°C | G = 5 | 7 | |
| Gain vs temperature | -100 | 25 | 100 | ppm/°C | G = 100 | 7 | |
| Gain nonlinearity | -0.012 | 0.005 | 0.012 | % of FSR | G = 100, VO = -14.85V to +14.9V | 7 | |
| Load capacitance stability | 1000 | pF | 7 | ||||
| Quiescent current | IQ | 60 | 85 | µA | IO = 0A | 7 | |
| Thermal resistance, junction-to-ambient | RθJA | 129.2 | ℃/W | D (SOIC) package | 5 | ||
| Thermal resistance, junction-to-case (top) | RθJC(top) | 69.1 | ℃/W | D (SOIC) package | 5 | ||
| Thermal resistance, junction-to-board | RθJB | 76.8 | ℃/W | D (SOIC) package | 5 | ||
| Junction-to-top characterization parameter | ψJT | 16.1 | ℃/W | D (SOIC) package | 5 | ||
| Junction-to-board characterization parameter | ψJB | 75.8 | ℃/W | D (SOIC) package | 5 |
CAD (KiCad official)
- Symbol:
INA122U - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
ina122u-2k5-etched.step/ina122u-2k5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina122u-2k5.step/ina122u-2k5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (34 pp, sha256
3691b8c6247ada8d, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# INA122U
**Texas Instruments** · Instrumentation Amplifiers · SOIC-8
INA122U from Texas Instruments, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RG | passive | Gain-setting pin; a single external gain resistor connects between pin 1 and pin 8, with gain G = 5 + 200kΩ / RG. |
| 2 | -IN | input | Negative (inverting) input; signal input voltage is limited to (V-) - 0.3 V to (V+) + 0.3 V and input current to 5 mA. |
| 3 | +IN | input | Positive (noninverting) input; signal input voltage is limited to (V-) - 0.3 V to (V+) + 0.3 V and input current to 5 mA. |
| 4 | -VS | power_in | Negative (lowest) power supply; the supply range is 2.2 V to 36 V single supply, or ±18 V dual supply maximum. |
| 5 | REF | input | Reference input that must be driven by a low-impedance source, since series resistance (for example 10 Ω) degrades common-mode rejection to about 80 dB. |
| 6 | OUT | output | Output; the output is referred to the REF pin, output short-circuit is continuous to VS/2, and load capacitance stability is specified to 1000 pF. |
| 7 | +VS | power_in | Positive (highest) power supply; the supply range is 2.2 V to 36 V single supply, with absolute maximum 36 V (±18 V dual). |
| 8 | RG | passive | Gain-setting pin; the other end of the same gain resistor connects here, paired with pin 1. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VS | 2.2 | | 36 | V | VS = (V+), (V-) | 4 |
| Specified temperature | | -40 | | 85 | °C | | 4 |
| Supply voltage, dual supply | VS | -18 | | 18 | V | Dual supply, VS = (V+), (V-) | 4 |
| Supply voltage, single supply | VS | | | 36 | V | Single supply, VS = (V+), 0V | 4 |
| Signal input current | | | | 5 | mA | | 4 |
| Operating temperature | TA | -40 | | 125 | °C | | 4 |
| Storage temperature | Tstg | -55 | | 125 | °C | | 4 |
| Lead temperature (soldering, 10s) | | | | 300 | °C | soldering, 10s | 4 |
| Offset voltage (RTI) | VOS | -250 | 100 | 250 | µV | | 6 |
| Offset voltage drift (RTI) | | -3 | 1 | 3 | µV/℃ | TA = -40°C to +85°C | 6 |
| Power-supply rejection ratio (RTI) | PSRR | | 10 | 30 | µV/V | VS = 2.2V to 36V | 6 |
| Operating input range | VCM | 0 | | 3.4 | V | | 6 |
| Common-mode rejection ratio (RTI) | CMRR | 83 | 96 | | dB | VCM = 0V to 3.4V | 6 |
| Input bias current | IB | | -10 | -25 | nA | VCM = VS / 2 | 6 |
| Input offset current | IOS | -2 | 1 | 2 | nA | VCM = VS / 2 | 6 |
| Gain | G | 5 | | 10000 | V/V | | 7 |
| Gain error | GE | -0.1 | 0.05 | 0.1 | % | G = 5, VO = ±10V | 7 |
| Gain error | GE | -0.5 | 0.3 | 0.5 | % | G = 100, VO = ±10V | 7 |
| Gain vs temperature | | -10 | 5 | 10 | ppm/°C | G = 5 | 7 |
| Gain vs temperature | | -100 | 25 | 100 | ppm/°C | G = 100 | 7 |
| Gain nonlinearity | | -0.012 | 0.005 | 0.012 | % of FSR | G = 100, VO = -14.85V to +14.9V | 7 |
| Load capacitance stability | | | | 1000 | pF | | 7 |
| Quiescent current | IQ | | 60 | 85 | µA | IO = 0A | 7 |
| Thermal resistance, junction-to-ambient | RθJA | | 129.2 | | ℃/W | D (SOIC) package | 5 |
| Thermal resistance, junction-to-case (top) | RθJC(top) | | 69.1 | | ℃/W | D (SOIC) package | 5 |
| Thermal resistance, junction-to-board | RθJB | | 76.8 | | ℃/W | D (SOIC) package | 5 |
| Junction-to-top characterization parameter | ψJT | | 16.1 | | ℃/W | D (SOIC) package | 5 |
| Junction-to-board characterization parameter | ψJB | | 75.8 | | ℃/W | D (SOIC) package | 5 |
## CAD (KiCad official)
- Symbol: `INA122U`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `ina122u-2k5-etched.step` / `ina122u-2k5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ina122u-2k5.step` / `ina122u-2k5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/ina122.pdf) (34 pp, sha256 `3691b8c6247ada8d`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ina122u-2k5-datasheet.pdf)