main
Ray Publish 0.1.0 826736f
{
  "slug": "ina114bu",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Instrumentation OpAmps, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "operational amplifier-comparator",
    "ina114bu",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ina114bu.kicad_sym",
    "ina114bu.kicad_mod",
    "ina114bu.glb",
    "ina114bu.step",
    "ina114bu.lbr",
    "docs/hero.png",
    "docs/ina114bu-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ina114bu-hero.glb",
    "ina114bu-hero.overlay.json",
    "ina114bu-etched.glb"
  ],
  "component": {
    "mpn": "INA114BU",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Operational Amplifier/Comparator",
    "subcategory": "Instrumentation OpAmps",
    "datasheet": "https://www.ti.com/lit/ds/symlink/ina114.pdf",
    "parts": {
      "symbol": "ina114bu.kicad_sym",
      "footprint": "ina114bu.kicad_mod",
      "model_3d": "ina114bu-hero.glb",
      "model_3d_plain": "ina114bu-etched.glb",
      "model_3d_step": "ina114bu-etched.step",
      "model_3d_step_plain": "ina114bu.step",
      "lbr": "ina114bu.lbr"
    },
    "distributor_links": {
      "lcsc": "C2870963",
      "digikey": "INA114BU-ND",
      "mouser": "595-INA114BU"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T08:23:49Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "INA114BU-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-INA114BU",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "2",
        "name": "RG",
        "type": "passive",
        "description": "Gain-setting resistor terminal; external RG between pins 2 and 15 sets gain G = 1 + 50kΩ/RG, range 1 to 10,000."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "4",
        "name": "V-IN",
        "type": "power_in",
        "description": "Inverting signal input, protected to ±40V and needing a bias current return path."
      },
      {
        "number": "5",
        "name": "V+IN",
        "type": "power_in",
        "description": "Non-inverting signal input, protected to ±40V and needing a bias current return path."
      },
      {
        "number": "6",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "7",
        "name": "V-",
        "type": "power_in",
        "description": "Negative supply; dual supply range is ±2.25V to ±18V."
      },
      {
        "number": "8",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "9",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "10",
        "name": "Ref",
        "type": "input",
        "description": "Output reference pin, normally grounded and must be low impedance to maintain good common-mode rejection."
      },
      {
        "number": "11",
        "name": "VO",
        "type": "output",
        "description": "Amplifier output, short-circuit protected continuously to VS/2, stable with up to 1000pF load capacitance."
      },
      {
        "number": "12",
        "name": "Feedback",
        "type": "input",
        "description": "Output sense feedback connection that must be connected to the output (pin 11) for proper operation, or to the load for remote sensing."
      },
      {
        "number": "13",
        "name": "V+",
        "type": "power_in",
        "description": "Positive supply; single supply range is 4.5V to 36V, dual supply ±2.25V to ±18V."
      },
      {
        "number": "14",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      },
      {
        "number": "15",
        "name": "RG",
        "type": "passive",
        "description": "Gain-setting resistor terminal; external RG between pins 2 and 15 sets gain G = 1 + 50kΩ/RG."
      },
      {
        "number": "16",
        "name": "NC",
        "type": "unconnected",
        "description": "No internal connection."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text+vision",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet has no pin function table. Pin descriptions come from the pinout figure and applicatio; The package hint says SOIC-16-300mil, but the datasheet calls INA114BU's package DW SOIC-16 (MS-013,",
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 33,
        "cost_usd": 0.1177,
        "at": "2026-11-12T08:23:42"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/ina114.pdf",
        "pages": 33,
        "sha256": "da3b0778217e7fa2",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ina114bu.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ina114bu-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "08d4ee9a2ccff427d32ff2ec85aedee5b6ff9ec34281bdfc07321986d11d9bd5",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DW0016A (SOIC, DW, 16)",
      "source_page": 29,
      "D": {
        "nom_mm": 10.3,
        "range_mm": [
          10.1,
          10.5
        ]
      },
      "E1": {
        "nom_mm": 7.5,
        "range_mm": [
          7.4,
          7.6
        ]
      },
      "E": {
        "nom_mm": 10.3,
        "range_mm": [
          9.97,
          10.63
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 2.65,
        "range_mm": [
          null,
          2.65
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "ina114bu.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}