component
INA114BP
Public Made by Adomby adom
Texas Instruments Instrumentation Amplifiers, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA114BP
Texas Instruments · Instrumentation Amplifiers · PDIP-8
INA114BP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RG | passive | Gain-setting resistor terminal; an external RG between pins 1 and 8 sets gain G = 1 + 50kΩ/RG, over a range of 1 to 10000 V/V. |
| 2 | V−IN | power_in | Inverting input, protected to ±40V and requiring a bias current return path. |
| 3 | V+IN | power_in | Non-inverting input, protected to ±40V and requiring a bias current return path. |
| 4 | V− | power_in | Negative supply, with dual supply range ±2.25V to ±18V. |
| 5 | Ref | input | Output reference pin, normally grounded, which must be low impedance to preserve common-mode rejection, and a voltage applied here adds to the output. |
| 6 | VO | output | Amplifier output, short-circuit current +20/−15 mA continuous to VS/2, stable with up to 1000 pF load capacitance. |
| 7 | V+ | power_in | Positive supply, with dual supply range ±2.25V to ±18V (single supply 4.5V to 36V). |
| 8 | RG | passive | Gain-setting resistor terminal; an external RG between pins 1 and 8 sets gain G = 1 + 50kΩ/RG. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
INA114BP - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
ina114bp-etched.step/ina114bp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina114bp.step/ina114bp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
be785d859b483481, retrieved 2026-10-11, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).