component
ILX3485DT
Public Made by Adomby adom
IKSEMICON RS-485 / RS-422 ICs, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownILX3485DT
IKSEMICON · RS-485 / RS-422 ICs · SOP-8
ILX3485DT from IKSEMICON, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output. CMOS-level output that reflects the differential bus state (A-B). High when (A-B) > +200 mV, low when < -200 mV. |
| 2 | /RE | input | Receiver output enable, active low. When low, RO is enabled; when high, RO is high-impedance. |
| 3 | DE | input | Driver output enable, active high. When high, the differential driver outputs A and B are enabled; when low, they are high-impedance. |
| 4 | DI | input | Driver input. CMOS-level logic input to be transmitted differentially onto A/B when DE is high. |
| 5 | GND | power_in | Ground reference (0 V). |
| 6 | A | bidirectional | Non-inverting differential bus I/O. Driver output when DE=H; receiver input when /RE=L. Part of the RS-485 twisted-pair bus. |
| 7 | B | bidirectional | Inverting differential bus I/O. Driver output when DE=H; receiver input when /RE=L. Part of the RS-485 twisted-pair bus. |
| 8 | VCC | power_in | Supply voltage input, 3.0 V to 3.6 V (3.3 V nominal). Bypass to GND with a 0.1 uF ceramic capacitor close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | IKSEMICON |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
ILX3485DT
CAD (KiCad official)
- Symbol:
ILX3485DT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
ilx3485dt-etched.step/ilx3485dt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ilx3485dt.step/ilx3485dt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: IKSEMICON datasheet (8 pp, sha256
f7989877c9e5bdc8, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).