main
Ray
Publish 0.1.0
a1a51a1
ILD8150XUMA1
Infineon Technologies · LED Drivers · SOIC-8-150mil
ILD8150XUMA1 from Infineon Technologies, in a SOIC-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Internal high-side switch output, rated -0.7 V to 90 V. |
| 2 | BOOT | passive | Internal switch driver bootstrap, connect to the bootstrap capacitor; the BOOT-SW voltage difference must never exceed 9 V. |
| 3 | DIM | input | Input for PWM dimming (250 Hz to 20 kHz), internally pulled-up, rated -0.3 V to 3.6 V; must be driven externally with at least 3.1 V during low power mode. |
| 4 | GND | power_in | Ground. |
| 5 | CS | input | Current sense feedback from the sense resistor RCS to the hysteretic controller, rated -0.3 V to 1.5 V. |
| 6 | SD | input | Active-low shutdown input (SD neg.), internally pulled-up, rated -0.3 V to 3.6 V; low power mode needs 3.3 V provided externally at DIM. |
| 7 | VCC | power_out | Output of the internal regulator (up to 7.3 V), connect to a bypass capacitor. |
| 8 | VIN | power_in | Input voltage pin, operating range 8 V to 80 V, absolute maximum 90 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | SOIC-8-150mil |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Thermal resistance junction-to-ambient PG-DSO-8 | RthJA | 170 | K/W | JEDEC 1s0p no cooling area, 345 mW, TA = 90 °C | 11 | ||
| Thermal resistance junction-to-ambient PG-DSO-8 | RthJA | 135 | K/W | JEDEC 1s0p 100 mm² cooling area, 440 mW, TA = 90 °C | 11 | ||
| Thermal resistance junction-to-case top PG-DSO-8 | RthJCtop | 42 | K/W | 440 mW power dissipation, TA = 90 °C | 11 | ||
| Junction temperature | TJ | 165 | °C | 11 | |||
| Storage temperature | TS | -65 | 150 | °C | 11 | ||
| Soldering temperature | TSOLD | 260 | °C | 11 | |||
| Latch-up | ILU | 100 | mA | JESD78D, TA = 85 °C | 12 | ||
| ESD HBM | VHBM | 2000 | V | JEDEC JS-001 | 12 | ||
| ESD CDM | VCDM | 500 | V | JEDEC JS-002 | 12 | ||
| Voltage at pin SW | VSW | -0.7 | 90 | V | 12 | ||
| Voltage at pin BOOT | VBOOT | 90 | V | Voltage internally supplied to BOOT pin; min printed as VSW; BOOT-SW must not exceed 9 V | 12 | ||
| Voltage at pin DIM | VDIM | -0.3 | 3.6 | V | 12 | ||
| Voltage at pin CS | VCS | -0.3 | 1.5 | V | 12 | ||
| Voltage at pin SD | VSD | -0.3 | 3.6 | V | 12 | ||
| Voltage at pin VCC | VVCC | -0.3 | 9 | V | Voltage internally supplied to VCC pin | 12 | |
| Voltage at pin VIN | VVIN | -0.3 | 90 | V | 12 | ||
| Junction temperature | TJ | -40 | 150 | °C | 12 | ||
| VIN pin voltage | VVIN | 8 | 80 | V | 12 | ||
| VIN pin to SW pin ON resistance | RON | 290 | mΩ | ISW=200 mA | 13 | ||
| VIN pin to SW pin ON resistance | RON | 545 | mΩ | ISW=200 mA and TJ=150 °C | 13 | ||
| Gate-driver UVLO (turn-off) | VGD_UVLO,OFF | 3.6 | V | VGD=VBOOT-VSW | 13 | ||
| Gate-driver UVLO (turn-on) | VGD_UVLO,ON | 3.7 | V | VGD=VBOOT-VSW | 13 | ||
| Voltage internally supplied to VCC pin | VVCC | 7.3 | V | 13 | |||
| VIN pin operating current in dim-to-off | IVIN_DO | 2.3 | mA | VDIM=0 V | 13 | ||
| VIN pin operating current in shutdown | IVIN_SD | 100 | μA | VSD=0 V and VDIM=3.3V provided externally, tested at VVIN=8 V | 13 | ||
| VIN pin operating current in shutdown | IVIN_SD | 140 | μA | VSD=0 V and VDIM=3.3V provided externally, tested at VVIN=80 V | 13 | ||
| VIN UVLO (turn-off) | VVIN_UVLO,OFF | 7.1 | V | 13 | |||
| VIN UVLO (turn-on) | VVIN_UVLO,ON | 7.5 | V | 13 | |||
| SD pin input high voltage | VSD,IH | 2.1 | V | 13 | |||
| SD pin input low voltage | VSD,IL | 1 | V | 13 | |||
| SD pin reduced pull-up current during shutdown | -ISD,LPU | 3 | µA | VSD=0 V VDIM>VDIM,SD provided externally | 13 | ||
| SD pin initial pull-up current to start shutdown | -ISD,HPU | 48 | 71 | µA | VSD>VSD,IH VDIM>VDIM,SD provided externally | 13 | |
| DIM pin low power mode current | IDIM,SD | 52 | 105 | µA | VSD=0 V | 14 | |
| DIM pin low power mode voltage | VDIM,SD | 3.1 | V | VSD=0 V | 14 | ||
| CS reference voltage high | VCSH | 379 | 390 | 401 | mV | undimmed | 14 |
| CS reference voltage low | VCSL | 320 | 330 | 340 | mV | undimmed | 14 |
| CS reference voltage hysteresis | HYSTCS | 7 | % | peak-to-average | 14 | ||
| DIM pin input high voltage | VDIM,IH | 2.1 | V | 14 | |||
| DIM pin input low voltage | VDIM,IL | 1 | V | 14 | |||
| Input low current (internal pull-up) | -IDIM,LPU | 65 | µA | VDIM=0 V | 14 | ||
| Switching frequency | fSW | 2 | MHz | 14 | |||
| SD pin stable high | tSD_HI | 20 | ms | time to begin of SW turn-on (low power mode exit) | 14 | ||
| SD pin stable low | tSD_LO | 5 | µs | time to begin of SW turn-off (low power mode entry) | 14 | ||
| Delay from VCS crossing to begin of SW turn-off or turn-on | tCSSW | 120 | ns | 14 | |||
| Output current hybrid dimming frequency | fOUT | 3060 | 3400 | 3740 | Hz | 15 | |
| Input PWM frequency | fINPUT | 250 | 20000 | Hz | 15 | ||
| Input PWM recognizable duty cycle | DPWM_IN | 0 | 100 | % | 15 | ||
| Thermal shutdown threshold (turn-off) | TOT,OFF | 153 | 161 | °C | 15 | ||
| Thermal shutdown threshold (turn-on) | TOT,ON | 138 | 146 | °C | 15 | ||
| Thermal shutdown hysteresis | TOT,HYST | 15 | °C | 15 | |||
| Soft-start time undimmed | tSS,100% | 50 | ms | 15 |
CAD (KiCad official)
- Symbol:
ILD8150XUMA1 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8-150mil (KiCad packages3D, STEP)
- 3D model files:
ild8150xuma1-etched.step/ild8150xuma1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ild8150xuma1.step/ild8150xuma1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (19 pp, sha256
b2e02ecda3a41656, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ILD8150XUMA1
**Infineon Technologies** · LED Drivers · SOIC-8-150mil
ILD8150XUMA1 from Infineon Technologies, in a SOIC-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | output | Internal high-side switch output, rated -0.7 V to 90 V. |
| 2 | BOOT | passive | Internal switch driver bootstrap, connect to the bootstrap capacitor; the BOOT-SW voltage difference must never exceed 9 V. |
| 3 | DIM | input | Input for PWM dimming (250 Hz to 20 kHz), internally pulled-up, rated -0.3 V to 3.6 V; must be driven externally with at least 3.1 V during low power mode. |
| 4 | GND | power_in | Ground. |
| 5 | CS | input | Current sense feedback from the sense resistor RCS to the hysteretic controller, rated -0.3 V to 1.5 V. |
| 6 | SD | input | Active-low shutdown input (SD neg.), internally pulled-up, rated -0.3 V to 3.6 V; low power mode needs 3.3 V provided externally at DIM. |
| 7 | VCC | power_out | Output of the internal regulator (up to 7.3 V), connect to a bypass capacitor. |
| 8 | VIN | power_in | Input voltage pin, operating range 8 V to 80 V, absolute maximum 90 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | SOIC-8-150mil |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Thermal resistance junction-to-ambient PG-DSO-8 | RthJA | | | 170 | K/W | JEDEC 1s0p no cooling area, 345 mW, TA = 90 °C | 11 |
| Thermal resistance junction-to-ambient PG-DSO-8 | RthJA | | | 135 | K/W | JEDEC 1s0p 100 mm² cooling area, 440 mW, TA = 90 °C | 11 |
| Thermal resistance junction-to-case top PG-DSO-8 | RthJCtop | | | 42 | K/W | 440 mW power dissipation, TA = 90 °C | 11 |
| Junction temperature | TJ | | | 165 | °C | | 11 |
| Storage temperature | TS | -65 | | 150 | °C | | 11 |
| Soldering temperature | TSOLD | | | 260 | °C | | 11 |
| Latch-up | ILU | | | 100 | mA | JESD78D, TA = 85 °C | 12 |
| ESD HBM | VHBM | | | 2000 | V | JEDEC JS-001 | 12 |
| ESD CDM | VCDM | | | 500 | V | JEDEC JS-002 | 12 |
| Voltage at pin SW | VSW | -0.7 | | 90 | V | | 12 |
| Voltage at pin BOOT | VBOOT | | | 90 | V | Voltage internally supplied to BOOT pin; min printed as VSW; BOOT-SW must not exceed 9 V | 12 |
| Voltage at pin DIM | VDIM | -0.3 | | 3.6 | V | | 12 |
| Voltage at pin CS | VCS | -0.3 | | 1.5 | V | | 12 |
| Voltage at pin SD | VSD | -0.3 | | 3.6 | V | | 12 |
| Voltage at pin VCC | VVCC | -0.3 | | 9 | V | Voltage internally supplied to VCC pin | 12 |
| Voltage at pin VIN | VVIN | -0.3 | | 90 | V | | 12 |
| Junction temperature | TJ | -40 | | 150 | °C | | 12 |
| VIN pin voltage | VVIN | 8 | | 80 | V | | 12 |
| VIN pin to SW pin ON resistance | RON | | 290 | | mΩ | ISW=200 mA | 13 |
| VIN pin to SW pin ON resistance | RON | | | 545 | mΩ | ISW=200 mA and TJ=150 °C | 13 |
| Gate-driver UVLO (turn-off) | VGD_UVLO,OFF | | 3.6 | | V | VGD=VBOOT-VSW | 13 |
| Gate-driver UVLO (turn-on) | VGD_UVLO,ON | | 3.7 | | V | VGD=VBOOT-VSW | 13 |
| Voltage internally supplied to VCC pin | VVCC | | | 7.3 | V | | 13 |
| VIN pin operating current in dim-to-off | IVIN_DO | | | 2.3 | mA | VDIM=0 V | 13 |
| VIN pin operating current in shutdown | IVIN_SD | | | 100 | μA | VSD=0 V and VDIM=3.3V provided externally, tested at VVIN=8 V | 13 |
| VIN pin operating current in shutdown | IVIN_SD | | | 140 | μA | VSD=0 V and VDIM=3.3V provided externally, tested at VVIN=80 V | 13 |
| VIN UVLO (turn-off) | VVIN_UVLO,OFF | | 7.1 | | V | | 13 |
| VIN UVLO (turn-on) | VVIN_UVLO,ON | | 7.5 | | V | | 13 |
| SD pin input high voltage | VSD,IH | 2.1 | | | V | | 13 |
| SD pin input low voltage | VSD,IL | | | 1 | V | | 13 |
| SD pin reduced pull-up current during shutdown | -ISD,LPU | | | 3 | µA | VSD=0 V VDIM>VDIM,SD provided externally | 13 |
| SD pin initial pull-up current to start shutdown | -ISD,HPU | | 48 | 71 | µA | VSD>VSD,IH VDIM>VDIM,SD provided externally | 13 |
| DIM pin low power mode current | IDIM,SD | | 52 | 105 | µA | VSD=0 V | 14 |
| DIM pin low power mode voltage | VDIM,SD | 3.1 | | | V | VSD=0 V | 14 |
| CS reference voltage high | VCSH | 379 | 390 | 401 | mV | undimmed | 14 |
| CS reference voltage low | VCSL | 320 | 330 | 340 | mV | undimmed | 14 |
| CS reference voltage hysteresis | HYSTCS | 7 | | | % | peak-to-average | 14 |
| DIM pin input high voltage | VDIM,IH | 2.1 | | | V | | 14 |
| DIM pin input low voltage | VDIM,IL | | | 1 | V | | 14 |
| Input low current (internal pull-up) | -IDIM,LPU | | | 65 | µA | VDIM=0 V | 14 |
| Switching frequency | fSW | | | 2 | MHz | | 14 |
| SD pin stable high | tSD_HI | 20 | | | ms | time to begin of SW turn-on (low power mode exit) | 14 |
| SD pin stable low | tSD_LO | 5 | | | µs | time to begin of SW turn-off (low power mode entry) | 14 |
| Delay from VCS crossing to begin of SW turn-off or turn-on | tCSSW | | | 120 | ns | | 14 |
| Output current hybrid dimming frequency | fOUT | 3060 | 3400 | 3740 | Hz | | 15 |
| Input PWM frequency | fINPUT | 250 | | 20000 | Hz | | 15 |
| Input PWM recognizable duty cycle | DPWM_IN | 0 | | 100 | % | | 15 |
| Thermal shutdown threshold (turn-off) | TOT,OFF | 153 | | 161 | °C | | 15 |
| Thermal shutdown threshold (turn-on) | TOT,ON | 138 | | 146 | °C | | 15 |
| Thermal shutdown hysteresis | TOT,HYST | 15 | | | °C | | 15 |
| Soft-start time undimmed | tSS,100% | | | 50 | ms | | 15 |
## CAD (KiCad official)
- Symbol: `ILD8150XUMA1`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8-150mil (KiCad packages3D, STEP)
- 3D model files: `ild8150xuma1-etched.step` / `ild8150xuma1-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ild8150xuma1.step` / `ild8150xuma1.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Infineon Technologies datasheet](docs/ild8150xuma1-datasheet.pdf) (19 pp, sha256 `b2e02ecda3a41656`, retrieved 2026-10-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ild8150xuma1-datasheet.pdf)