main
History Download
Ray Publish 0.1.0 b80b091

ILD8150

Infineon Technologies · LED Drivers · SOIC-8-150mil

ILD8150 from Infineon Technologies, in a SOIC-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Internal high-side switch output, rated -0.7 V to 90 V.
2 BOOT passive Internal switch driver bootstrap, connect to bootstrap capacitor; voltage difference between BOOT and SW must never exceed 9 V.
3 DIM input Input for PWM dimming 250 Hz to 20 kHz, internally pulled-up, absolute maximum -0.3 V to 3.6 V.
4 GND power_in Ground.
5 CS input Current sense feedback from the sense resistor RCS, absolute maximum -0.3 V to 1.5 V.
6 SD input Active-low shutdown input (internally pulled-up); 3.3 V must be provided externally at DIM pin to use shutdown, absolute maximum -0.3 V to 3.6 V.
7 VCC power_out Output of the internal regulator (max 7.3 V), connect to bypass capacitor.
8 VIN power_in Input voltage, operating range 8 V to 80 V, absolute maximum 90 V.

Key specifications

Parameter Value
Manufacturer Infineon Technologies
Package SOIC-8-150mil
Category Display Modules / LED Drivers / Display Drivers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Junction temperature TJ 165 °C 12
Storage temperature TS -65 150 °C 12
Soldering temperature TSOLD 260 °C 12
Latch-up ILU 100 mA JEDEC JESD78D, TA=85°C 13
ESD HBM VHBM 2000 V JEDEC JS-001 13
ESD CDM VCDM 500 V JEDEC JS-002 13
Voltage at pin SW VSW -0.7 90 V 13
Voltage at pin BOOT VBOOT 90 V Min is VSW; BOOT-SW must never exceed 9 V 13
Voltage at pin DIM VDIM -0.3 3.6 V 13
Voltage at pin CS VCS -0.3 1.5 V 13
Voltage at pin SD VSD -0.3 3.6 V 13
Voltage at pin VCC VVCC -0.3 9 V Voltage internally supplied to VCC pin 13
Voltage at pin VIN VVIN -0.3 90 V 13
Junction temperature (operating) TJ -40 150 °C 13
VIN pin voltage VVIN 8 80 V 13
Thermal resistance junction-to-ambient, PG-DSO-8 RthJA 170 K/W JEDEC 1s0p no cooling area, for 345 mW power dissipation, TA = 90 °C 12
Thermal resistance junction-to-ambient, PG-DSO-8 RthJA 135 K/W JEDEC 1s0p 100 mm² cooling area, for 440 mW power dissipation, TA = 90 °C 12
Thermal resistance junction-to-case top, PG-DSO-8 RthJCtop 42 K/W for 440 mW power dissipation, TA = 90 °C 12
VIN pin to SW pin ON resistance RON 290 mΩ ISW=200 mA 14
VIN pin to SW pin ON resistance RON 545 mΩ ISW=200 mA and TJ=150 °C 14
Voltage internally supplied to VCC pin VVCC 7.3 V 14
VIN pin operating current in dim-to-off IVIN_DO 2.3 mA VDIM=0 V 14
VIN pin operating current in shutdown IVIN_SD 100 μA VSD=0 V and VDIM=3.3 V provided externally; tested at VVIN=8 V 14
VIN pin operating current in shutdown IVIN_SD 140 μA VSD=0 V and VDIM=3.3 V provided externally; tested at VVIN=80 V 14
SD pin input high voltage VSD,IH 2.1 V 14
SD pin input low voltage VSD,IL 1 V 14
SD input low current (internal pull-up) -ISD,LPU 3 µA VSD=0 V 14
CS reference voltage high VCSH 379 390 401 mV undimmed 15
CS reference voltage low VCSL 320 330 340 mV undimmed 15
CS reference voltage hysteresis HYSTCS 7 % peak-to-average 15
DIM pin input high voltage VDIM,IH 2.1 V 15
DIM pin input low voltage VDIM,IL 1 V 15
DIM input low current (internal pull-up) -IDIM,LPU 65 µA VDIM=0 V 15
Switching frequency fSW 2 MHz 15
SD pin stable high tSD_HI 20 ms time to begin of SW turn-on (low power mode exit) 15
SD pin stable low tSD_LO 5 µs time to begin of SW turn-off (low power mode entry) 15
Delay from VCS crossing to begin of SW turn-off or turn-on tCSSW 120 ns 15
Output current hybrid dimming frequency fOUT 3060 3400 3740 Hz 15
Input PWM frequency fINPUT 250 20000 Hz 15
Input PWM recognizable duty cycle DPWM_IN 0 100 % 15
Thermal shutdown threshold (turn-off) TOT,OFF 153 161 °C 16
Thermal shutdown threshold (turn-on) TOT,ON 138 146 °C 16
Thermal shutdown hysteresis TOT,HYST 15 °C 16
Soft-start time undimmed tSS,100% 50 ms 16
Gate-driver under-voltage lock-out (turn-off) VGD_UVLO,OFF 3.6 V VGD=VBOOT-VSW 14
Gate-driver under-voltage lock-out (turn-on) VGD_UVLO,ON 3.7 V VGD=VBOOT-VSW 14
VIN under-voltage lock-out (turn-off) VVIN_UVLO,OFF 7.1 V 14
VIN under-voltage lock-out (turn-on) VVIN_UVLO,ON 7.5 V 14
Input PWM duty cycle dim-to-off (turn-off) DPWM_IN,OFF 0.45 % 16
Input PWM duty cycle dim-to-off (turn-on) DPWM_IN,ON 0.5 % 16

CAD (KiCad official)

  • Symbol: ILD8150
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8-150mil (KiCad packages3D, STEP)
  • 3D model files: ild8150-etched.step / ild8150-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ild8150.step / ild8150.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Infineon Technologies datasheet (20 pp, sha256 204f2042b499ef8c, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF