main
Ray ila82c251dt-bf: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 2af0c8a
{
  "schema_version": 1,
  "type": "component",
  "slug": "ila82c251dt-bf",
  "title": "ILA82C251DT-BF",
  "brief": "IKSEMICON CAN Controllers, SOP-8. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "ila82c251dt-bf"
  ],
  "component": {
    "mpn": "ILA82C251DT-BF",
    "manufacturer": "IKSEMICON",
    "package": "SOP-8",
    "pin_count": 8,
    "category": "Interface",
    "subcategory": "CAN Controllers",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/2a8f0941deeeb111a563f0b7106f5f98.pdf",
    "parts": {
      "symbol": "ila82c251dt-bf.kicad_sym",
      "footprint": "ila82c251dt-bf.kicad_mod",
      "model_3d": "ila82c251dt-bf-etched.glb",
      "model_3d_plain": "ila82c251dt-bf.glb",
      "model_3d_step": "ila82c251dt-bf-etched.step",
      "model_3d_step_plain": "ila82c251dt-bf.step",
      "lbr": "ila82c251dt-bf.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "TXD",
        "type": "input",
        "description": "Transmit data input from the CAN protocol controller. Low level (~1 V) drives the bus to dominant state; high level (~4 V) drives to recessive state."
      },
      {
        "number": "2",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference (0 V)."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage. Recommended operating range 4.5 V to 5.5 V; absolute maximum 7.0 V. Typically bypassed with a 100 nF ceramic capacitor to GND."
      },
      {
        "number": "4",
        "name": "RXD",
        "type": "output",
        "description": "Receive data output to the CAN protocol controller. Reports bus state: L when bus is dominant, H when recessive. Push-pull output referenced to VCC."
      },
      {
        "number": "5",
        "name": "Vref",
        "type": "output",
        "description": "Reference voltage output equal to approximately 0.5 x VCC (typ. 2.5 V at VCC = 5 V). Can be used as a bias reference for the CAN protocol controller."
      },
      {
        "number": "6",
        "name": "CANL",
        "type": "bidirectional",
        "description": "LOW-level CAN bus voltage input/output. Connects to the CAN bus low line; recessive bus voltage ~2.5 V, dominant driven low. Withstands -36 V to +36 V and transient ±200 V."
      },
      {
        "number": "7",
        "name": "CANH",
        "type": "bidirectional",
        "description": "HIGH-level CAN bus voltage input/output. Connects to the CAN bus high line; recessive bus voltage ~2.5 V, dominant driven high (typ. 3.5 V). Withstands -36 V to +36 V and transient ±200 V."
      },
      {
        "number": "8",
        "name": "Rs",
        "type": "input",
        "description": "Mode-select input. Tie to GND for high-speed mode; connect through Rext to GND for reduced-RFI slope-control mode; drive high (VRs > 0.75 VCC) for standby mode."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/2a8f0941deeeb111a563f0b7106f5f98.pdf",
        "pages": 13,
        "sha256": "a150ed73a5348a6c",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ila82c251dt-bf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ila82c251dt-bf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6,
          4.9,
          1.75
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "461c82a233a7252156dbf7608520834e24ec3ee7b21976673deb13033ab05717",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "IKSEMICON",
      "Package": "SOP-8",
      "Category": "Interface",
      "Pins": "8"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "ila82c251dt-bf"
  ],
  "discovery_pitch": "ILA82C251DT-BF (IKSEMICON) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ila82c251dt-bf.kicad_sym",
    "ila82c251dt-bf.kicad_mod",
    "ila82c251dt-bf.glb",
    "ila82c251dt-bf.step",
    "ila82c251dt-bf.lbr",
    "docs/hero.png",
    "docs/ila82c251dt-bf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ila82c251dt-bf-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "variants": [
    {
      "mpn": "ILA82C251DT-BFD",
      "kind": "packaging"
    },
    {
      "mpn": "ILA82C251DT-BF",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-24T22:30:24.934Z"
}