main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs il9910dt-b: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers il9910dt-b: viewers rendered from the public page · Ray
il9910dt-b-etched.fit.json il9910dt-b: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
il9910dt-b-etched.glb il9910dt-b: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
il9910dt-b-etched.step il9910dt-b: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
il9910dt-b.glb Publish 0.1.0 · Ray
il9910dt-b.kicad_mod Publish 0.1.0 · Ray
il9910dt-b.kicad_sym Publish 0.1.0 · Ray
il9910dt-b.lbr Publish 0.1.0 · Ray
il9910dt-b.step Publish 0.1.0 · Ray
package.json Publish 0.2.1 · Ray
page.json Publish 0.2.1 · Ray
README.md il9910dt-b: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

IL9910DT-B

IKSEMICON · LED Drivers · SOIC-8

IL9910DT-B from IKSEMICON, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Supply voltage input. Accepts 8 V to 450 V DC; absolute maximum 470 V. Feeds the internal 7.5 V linear regulator that produces VDD.
2 CS input LED current sense input. Connects to the external sense resistor at the source of the power MOSFET; the gate drive terminates when CS reaches the internal threshold (242-257 mV for -B variant, or as programmed at LD). Absolute range -0.3 V to VDD+0.3 V.
3 GND power_in Common ground / return pin for all internal circuitry.
4 GATE output Gate drive output for the external power MOSFET. Swings between GND and VDD (~7.5 V); VGATE(hi) ≥ 6.7 V, VGATE(lo) ≤ 0.3 V. Rise/fall time ≤ 50 ns into 500 pF. Absolute range -0.3 V to VDD+0.3 V.
5 PWM_D input Low-frequency PWM dimming input; can also be used as an enable input. Pulling to GND disables (shuts down) the IC (IINsd ≤ 1 mA). Internal pull-down resistance REN = 50-150 kΩ. Enable high level ≥ 2.4 V. Absolute range -0.3 V to VDD+0.3 V.
6 VDD power_out Internally regulated 7.0-8.0 V supply pin. Can be used as a supply voltage output for low-voltage external circuitry (IDD(ext) up to 1 mA). Bypass capacitor to GND required. VDDMAX = 13.5 V.
7 LD input Linear dimming input. Applying 0 V-250 mV programs the CS threshold and therefore the LED current; voltages above 250 mV do not increase output. Also used with a capacitor to VDD for soft-start ramping. Absolute range -0.3 V to VDD+0.3 V.
8 ROSC input Internal oscillator programming pin. Connect a resistor to GND to set the switching frequency: Fosc = 25000/(Rosc[kΩ] + 22) kHz, tunable 25-300 kHz (e.g. 1 MΩ → 20-30 kHz, 226 kΩ → 80-120 kHz).

Key specifications

Parameter Value
Manufacturer IKSEMICON
Package SOIC-8
Category LED-drv
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • IL9910DT-B
  • IL9910N-B
  • IL9910DT-A
  • IL9910N-A
  • IL9910DT-C
  • IL9910N-C

CAD (KiCad official)

  • Symbol: IL9910DT-B
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: il9910dt-b-etched.step / il9910dt-b-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); il9910dt-b.step / il9910dt-b.glb are the bare package body.

3D model downloads

Two STEP files. Same geometry, different body top:

File Size Use it when
il9910dt-b.step 122 KB You want the bare part, or you mark your own boards.
il9910dt-b-etched.step 1.9 MB You want the part with IL9910DT-B already on it.

The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 478 faces against 147 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: IKSEMICON datasheet (11 pp, sha256 ed877ebd8f7c51ec, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF