main
Ray il34118dwt: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 7a93660
{
  "schema_version": 1,
  "type": "component",
  "slug": "il34118dwt",
  "title": "IL34118DWT",
  "brief": "IKSEMICON Audio Interface ICs, SOP-28-300mil. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "il34118dwt"
  ],
  "component": {
    "mpn": "IL34118DWT",
    "manufacturer": "IKSEMICON",
    "package": "SOP-28-300mil",
    "pin_count": 28,
    "category": "Interface",
    "subcategory": "Audio Interface ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/db5f397019f651d844060829a846e74f.pdf",
    "parts": {
      "symbol": "il34118dwt.kicad_sym",
      "footprint": "il34118dwt.kicad_mod",
      "model_3d": "il34118dwt-etched.glb",
      "model_3d_plain": "il34118dwt.glb",
      "model_3d_step": "il34118dwt-etched.step",
      "model_3d_step_plain": "il34118dwt.step",
      "lbr": "il34118dwt.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "FO",
        "type": "output",
        "description": "Filter buffer output. Low-output-impedance (<50 Ω) output of the internal filter buffer used with external components to form a high-pass (60/120 Hz hum reject), low-pass, or band-pass filter in the receive path."
      },
      {
        "number": "2",
        "name": "FI",
        "type": "input",
        "description": "Filter buffer input. High-impedance (>1.0 MΩ) input to the internal filter buffer; external RC network between FI and FO sets the filter response."
      },
      {
        "number": "3",
        "name": "CD",
        "type": "input",
        "description": "Chip Disable. When asserted, powers down the entire circuit to conserve power (useful for long telephone loops where loop current is at a minimum)."
      },
      {
        "number": "4",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply voltage, 3.0 V to 6.5 V. Typical line-powered operation draws ~5.0 mA."
      },
      {
        "number": "5",
        "name": "HTO+",
        "type": "output",
        "description": "Hybrid amplifier 1 non-inverting output. Drives the coupling transformer through the balancing network Zbal; gain set by external resistors -RHF/RHI. Output current capability ≥5 mA (typ 8 mA limit)."
      },
      {
        "number": "6",
        "name": "HTO-",
        "type": "output",
        "description": "Hybrid amplifier 2 output (fixed internal gain of -1.0). Second of the two hybrid amplifiers used to form the two-to-four wire converter for the telephone line interface."
      },
      {
        "number": "7",
        "name": "HTI",
        "type": "input",
        "description": "Hybrid amplifier inverting input. Bias current typically 30 nA out of the pin; open-loop gain ~80 dB, gain-bandwidth ~1.0 MHz."
      },
      {
        "number": "8",
        "name": "TXO",
        "type": "output",
        "description": "Transmit attenuator output. Drives the transmit signal path toward the hybrid; complements RXO in half-duplex operation."
      },
      {
        "number": "9",
        "name": "TXI",
        "type": "input",
        "description": "Transmit attenuator input. Nominal 10 kΩ input impedance; recommended input signal ≤350 mVrms (990 mVp-p) to prevent distortion."
      },
      {
        "number": "10",
        "name": "MCO",
        "type": "output",
        "description": "Microphone amplifier output. Output impedance <10 Ω until current limit (~1.5 mA). Gain set by RMF/RMI external resistors between MCI and MCO."
      },
      {
        "number": "11",
        "name": "MCI",
        "type": "input",
        "description": "Microphone amplifier inverting input. Non-inverting input is internally tied to VB. Input bias current typically 40 nA out of the pin."
      },
      {
        "number": "12",
        "name": "MUT",
        "type": "input",
        "description": "Mute control input. When activated, reduces microphone amplifier gain to -39 dB by shorting the output to the inverting input (with RMI = 5.1 kΩ). Threshold ~1.5 V; must be kept between GND and VCC; tie to GND if unused."
      },
      {
        "number": "13",
        "name": "VLC",
        "type": "input",
        "description": "Volume control input, sensed as a voltage with respect to VB. Adjusts the receive attenuator gain; -46 dB when VLC = VB and increasing toward +6.0 dB as VLC is reduced. Bias current typically 60 nA out of the pin."
      },
      {
        "number": "14",
        "name": "CT",
        "type": "passive",
        "description": "Attenuator control timing capacitor. External CT (typ 5.0 μF) with RT (typ 120 kΩ) to VB sets the transmit/receive/idle switching time constants. Voltage at CT (relative to VB) directly monitors the circuit's mode."
      },
      {
        "number": "15",
        "name": "VB",
        "type": "power_out",
        "description": "Internal analog reference/bias voltage (mid-supply). Serves as the AC ground reference for the attenuators, hybrid, microphone amplifier, and level detectors."
      },
      {
        "number": "16",
        "name": "CPT",
        "type": "passive",
        "description": "Transmit background noise monitor capacitor. External capacitor stores a DC voltage representing the transmit-path noise level; slow rise time (external RC), fast decay. Should match CPR value within ±10%."
      },
      {
        "number": "17",
        "name": "TLI2",
        "type": "input",
        "description": "Transmit level detector 2 input. Senses the microphone amplifier output signal for the transmit background noise / speech detection path."
      },
      {
        "number": "18",
        "name": "TLO2",
        "type": "output",
        "description": "Transmit level detector 2 output. Charges an external capacitor (typ 2.0 μF) through a diode and 350 Ω limiting resistor to form a DC representation of the input AC signal level."
      },
      {
        "number": "19",
        "name": "RLO2",
        "type": "output",
        "description": "Receive level detector 2 output. Charges an external capacitor (typ 2.0 μF) to represent the receive-side (speaker) signal level for the attenuator control block."
      },
      {
        "number": "20",
        "name": "RLI2",
        "type": "input",
        "description": "Receive level detector 2 input. Senses the receive-side signal (typically the speaker amplifier output) for background noise / speech detection."
      },
      {
        "number": "21",
        "name": "RXI",
        "type": "input",
        "description": "Receive attenuator input. Nominal 10 kΩ input impedance; recommended input signal ≤350 mVrms (990 mVp-p) to prevent distortion. Also feeds the dial tone detector comparator."
      },
      {
        "number": "22",
        "name": "RXO",
        "type": "output",
        "description": "Receive attenuator output. Drives the receive signal path toward the speaker amplifier; complementary in gain to TXO."
      },
      {
        "number": "23",
        "name": "TLI1",
        "type": "input",
        "description": "Transmit level detector 1 input. Senses the hybrid output (Tip/Ring side) signal level for the transmit control path."
      },
      {
        "number": "24",
        "name": "TLO1",
        "type": "output",
        "description": "Transmit level detector 1 output. Charges an external capacitor (typ 2.0 μF) through a diode and 350 Ω limiting resistor to represent the TLI1 input AC signal level."
      },
      {
        "number": "25",
        "name": "RLO1",
        "type": "output",
        "description": "Receive level detector 1 output. Feeds a comparator whose output goes to the attenuator control block; also feeds the receive background noise monitor."
      },
      {
        "number": "26",
        "name": "RLI1",
        "type": "input",
        "description": "Receive level detector 1 input. Sees the same signal as at Tip/Ring for receive-side level detection."
      },
      {
        "number": "27",
        "name": "CPR",
        "type": "passive",
        "description": "Receive background noise monitor capacitor. External capacitor stores a DC voltage representing receive-path noise level; charge/discharge sets response time to background noise variations (~4.7 s typical). Should match CPT within ±10%."
      },
      {
        "number": "28",
        "name": "GND",
        "type": "power_in",
        "description": "Ground / negative supply return."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/db5f397019f651d844060829a846e74f.pdf",
        "pages": 14,
        "sha256": "b3cd47de9884e9d2",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 28,
        "described": 28,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "il34118dwt.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          11.636,
          18.16,
          2.666
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "ecc34510e8f74b6103a72c2f24133ad80006c738972a56531d1221b277fcecdb",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "il34118dwt-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          11.636,
          18.16,
          2.666
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "cb7bbf961c6fbb69cbe529a255665bbb417ae61a9d5de7e5dd396ccce6b770a8",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "IKSEMICON",
      "Package": "SOP-28-300mil",
      "Category": "Interface",
      "Pins": "28"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "il34118dwt"
  ],
  "discovery_pitch": "IL34118DWT (IKSEMICON) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "il34118dwt.kicad_sym",
    "il34118dwt.kicad_mod",
    "il34118dwt.glb",
    "il34118dwt.step",
    "il34118dwt.lbr",
    "docs/hero.png",
    "docs/il34118dwt-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "il34118dwt-etched.step"
  ],
  "visibility": {
    "public": true
  },
  "variants": [
    {
      "mpn": "IL34118DWT",
      "kind": "packaging"
    },
    {
      "mpn": "IL34118DWTN",
      "kind": "packaging"
    }
  ],
  "updated_at": "2026-09-24T22:30:09.116Z"
}