main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs il34063adt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers il34063adt: viewers · Ray
il34063adt-etched.fit.json il34063adt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
il34063adt-etched.glb il34063adt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
il34063adt-etched.step il34063adt: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
il34063adt.glb Publish 0.1.0 · Ray
il34063adt.kicad_mod Publish 0.1.0 · Ray
il34063adt.kicad_sym Publish 0.1.0 · Ray
il34063adt.lbr Publish 0.1.0 · Ray
il34063adt.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json il34063adt: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md il34063adt: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

IL34063ADT

IKSEMICON · DC-DC Converters · SOP-8

IL34063ADT from IKSEMICON, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SWC output Switch Collector. Collector of the internal high-current output switch transistor Q1. Rated to 40V and 1.5A switch current. Connected to the inductor/supply in step-up and voltage-inverting topologies.
2 SWE output Switch Emitter. Emitter of the internal output switch transistor Q1. Rated to 40V (with Vpin1 = 40V). Connected to the inductor/output diode in step-down topology or to ground return in step-up topology.
3 TC passive Timing Capacitor. External capacitor CT sets the oscillator on-time per CT = 4.5x10^-5 * ton. Typical values around 470 pF to 1.5 nF for the operating range up to 100 kHz.
4 GND power_in Ground return for the IC. Reference for VCC, comparator, oscillator and reference regulator.
5 CII input Comparator Inverting Input. Feedback sense input compared to the internal 1.25V reference (Vth typ 1.25V, 1.225-1.275V). Output voltage set by Vout = 1.25(1 + R2/R1). Input voltage range -0.3V to +40V, input bias current typically -40 nA.
6 VCC power_in Power supply input. Operating range 3.0V to 40V. Typical supply current 2.5 mA (max 4.0 mA) with CT = 1 nF.
7 Ipk Sense input Peak current sense input. Connected across an external current sense resistor RSC from VCC. Current-limit sense voltage is typically 300 mV (250-350 mV) between VCC and this pin; RSC ≈ 0.3 / IPK(switch).
8 DRC output Driver Collector. Collector of the internal driver transistor Q2. Rated 40V, driver collector current up to 100 mA. Tie to pin 1 for Darlington-connected output switch, or to VCC through a base-drive resistor for non-Darlington operation.

Key specifications

Parameter Value
Manufacturer IKSEMICON
Package SOP-8
Category PMIC
Pins 8

Ordering variants

Same part, different packaging or reel option.

  • IL34063ADT
  • IL34063AN

CAD (KiCad official)

  • Symbol: IL34063ADT
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: il34063adt-etched.step / il34063adt-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); il34063adt.step / il34063adt.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: IKSEMICON datasheet (10 pp, sha256 8664e9719568a738, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF