Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

IL261E

NVE · Digital Isolators · SOIC-16-300mil

IL261E from NVE, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD1 power_in Side-1 supply voltage with a recommended operating range of 3.0 V to 5.5 V, to be decoupled with a low-ESR 47 nF ceramic capacitor located as close as possible to the VDD pin.
2 GND1 power_in Side-1 ground, internally connected to pin 8, with a ground plane highly recommended for data rates above 10 Mbps.
3 IN1 input Logic input 1 with VIH of 2.4 V minimum up to VDD and VIL of 0 V to 0.8 V maximum.
4 IN2 input Logic input 2 with VIH of 2.4 V minimum up to VDD and VIL of 0 V to 0.8 V maximum.
5 IN3 input Logic input 3 with VIH of 2.4 V minimum up to VDD and VIL of 0 V to 0.8 V maximum.
6 IN4 input Logic input 4 with VIH of 2.4 V minimum up to VDD and VIL of 0 V to 0.8 V maximum.
7 OUT5 output Logic output 5 with VOH of at least VDD − 0.1 V at IO = −20 µA, and output current drive limited to ±10 mA absolute maximum.
8 GND1 power_in Side-1 ground, internally connected to pin 2.
9 GND2 power_in Side-2 ground, internally connected to pin 15, with a ground plane highly recommended for data rates above 10 Mbps.
10 IN5 input Logic input 5 with VIH of 2.4 V minimum up to VDD and VIL of 0 V to 0.8 V maximum.
11 OUT4 output Logic output 4 with VOH of at least VDD − 0.1 V at IO = −20 µA, and output current drive limited to ±10 mA absolute maximum.
12 OUT3 output Logic output 3 with VOH of at least VDD − 0.1 V at IO = −20 µA, and output current drive limited to ±10 mA absolute maximum.
13 OUT2 output Logic output 2 with VOH of at least VDD − 0.1 V at IO = −20 µA, and output current drive limited to ±10 mA absolute maximum.
14 OUT1 output Logic output 1 with VOH of at least VDD − 0.1 V at IO = −20 µA, and output current drive limited to ±10 mA absolute maximum.
15 GND2 power_in Side-2 ground, internally connected to pin 9.
16 VDD2 power_in Side-2 supply voltage with a recommended operating range of 3.0 V to 5.5 V, to be decoupled with a low-ESR 47 nF ceramic capacitor located as close as possible to the VDD pin.

Key specifications

Parameter Value
Manufacturer NVE
Package SOIC-16-300mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature TS -55 150 °C 2
Junction Temperature TJ -55 150 °C 2
Ambient Operating Temperature TA -40 85 °C 2
Supply Voltage VDD1,VDD2 -0.5 7 V 2
Output Current Drive IO -10 10 mA 2
Lead Solder Temperature 260 °C 10 sec. 2
Ambient Operating Temperature TA -40 85 °C 2
Junction Temperature TJ -40 110 °C 2
Supply Voltage VDD1,VDD2 3 5.5 V 3.3/5.0 V Operation 2
Logic High Input Voltage VIH 2.4 V 2
Logic Low Input Voltage VIL 0 0.8 V 2
Input Signal Rise and Fall Times tIR, tIF 1 μs 2
Junction-Ambient Thermal Resistance (0.3" SOIC) θJA 60 °C/W Soldered to double-sided board; free air 2
Junction-Case (Top) Thermal Resistance (0.3" SOIC) ΨJT 20 °C/W 2
Power Dissipation (0.3" SOIC) PD 800 mW 2
(3.3 V spec) Input Quiescent Current IDD1 1.2 1.75 mA 5
(3.3 V spec) Output Quiescent Current IDD2 4.8 7 mA 5
(3.3 V spec) Logic Input Current Ii -10 10 μA 5
(3.3 V spec) Maximum Data Rate 100 110 Mbps CL = 15 pF 5
(3.3 V spec) Minimum Pulse Width PW 10 ns 50% Points, VO 5
(3.3 V spec) Propagation Delay Input to Output (High to Low) tPHL 12 18 ns CL = 15 pF 5
(3.3 V spec) Propagation Delay Input to Output (Low to High) tPLH 12 18 ns CL = 15 pF 5
(3.3 V spec) Pulse Width Distortion PWD 2 3 ns CL = 15 pF 5
(3.3 V spec) Propagation Delay Skew tPSK 4 6 ns CL = 15 pF 5
(3.3 V spec) Output Rise Time (10%-90%) tR 2 4 ns CL = 15 pF 5
(3.3 V spec) Output Fall Time (10%-90%) tF 2 4 ns CL = 15 pF 5
(3.3 V spec) Common Mode Transient Immunity /CMH/,/CML/ 30 50 kV/μs VCM = 1500 VDC; tTRANSIENT = 25 ns 5
(3.3 V spec) Channel-to-Channel Skew 2 3 ns CL = 15 pF 5
(3.3 V spec) Dynamic Power Consumption 140 240 μA/Mbps per channel 5
(5 V spec) Input Quiescent Current IDD1 1.8 2.5 mA 6
(5 V spec) Output Quiescent Current IDD2 7.2 10 mA 6
(5 V spec) Logic Input Current Ii -10 10 μA 6
(5 V spec) Maximum Data Rate 100 110 Mbps CL = 15 pF 6
(5 V spec) Minimum Pulse Width PW 10 ns 50% Points, VO 6
(5 V spec) Propagation Delay Input to Output (High to Low) tPHL 10 15 ns CL = 15 pF 6
(5 V spec) Propagation Delay Input to Output (Low to High) tPLH 10 15 ns CL = 15 pF 6
(5 V spec) Pulse Width Distortion PWD 2 3 ns CL = 15 pF 6
(5 V spec) Propagation Delay Skew tPSK 4 6 ns CL = 15 pF 6
(5 V spec) Output Rise Time (10%-90%) tR 1 3 ns CL = 15 pF 6
(5 V spec) Output Fall Time (10%-90%) tF 1 3 ns CL = 15 pF 6
(5 V spec) Common Mode Transient Immunity /CMH/,/CML/ 30 50 kV/μs VCM = 1500 VDC; tTRANSIENT = 25 ns 6
(5 V spec) Channel-to-Channel Skew 2 3 ns CL = 15 pF 6
(5 V spec) Dynamic Power Consumption 200 340 μA/Mbps per channel 6

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Blank = 80/20 Tin/Lead Plating E = RoHS Compliant 13

CAD (KiCad official)

  • Symbol: IL261E
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: il261e-etched.step / il261e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); il261e.step / il261e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NVE datasheet (16 pp, sha256 9837f3a3afb3c378, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF