IKCM15L60GD

{
  "slug": "ikcm15l60gd",
  "version": "0.1.0",
  "type": "component",
  "description": "Infineon Technologies Motor Driver ICs, DIP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "ikcm15l60gd",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ikcm15l60gd.kicad_sym",
    "ikcm15l60gd.kicad_mod",
    "ikcm15l60gd.glb",
    "ikcm15l60gd.step",
    "ikcm15l60gd.lbr",
    "docs/hero.png",
    "docs/ikcm15l60gd-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ikcm15l60gd-hero.glb",
    "ikcm15l60gd-hero.overlay.json",
    "ikcm15l60gd-etched.glb"
  ],
  "component": {
    "mpn": "IKCM15L60GD",
    "manufacturer": "Infineon Technologies",
    "package": "DIP-24",
    "pin_count": 24,
    "category": "Power Management ICs",
    "subcategory": "Motor Driver ICs",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/9461532fd8806e0e79d51e85950c590c.pdf",
    "parts": {
      "symbol": "ikcm15l60gd.kicad_sym",
      "footprint": "ikcm15l60gd.kicad_mod",
      "model_3d": "ikcm15l60gd-hero.glb",
      "model_3d_plain": "ikcm15l60gd-etched.glb",
      "model_3d_step": "ikcm15l60gd-etched.step",
      "model_3d_step_plain": "ikcm15l60gd.step",
      "lbr": "ikcm15l60gd.lbr"
    },
    "distributor_links": {
      "lcsc": "C536159"
    },
    "distributor_check": {
      "checked_at": "2026-10-24T16:21:03Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": null,
        "status": "no match"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VS(U)",
        "type": "power_in",
        "description": "U-phase high-side floating IC supply offset; VS(U) is robust to a transient negative voltage of -50V with respect to VSS and the high-side circuit floats with the external high-side emitter voltage."
      },
      {
        "number": "2",
        "name": "VB(U)",
        "type": "power_in",
        "description": "U-phase high-side floating IC supply voltage; the high-side supply uses an integrated bootstrap circuit with a rising under-voltage threshold of 12.1V typ and a falling threshold of 10.4V typ."
      },
      {
        "number": "3",
        "name": "VS(V)",
        "type": "power_in",
        "description": "V-phase high-side floating IC supply offset; VS(V) is robust to a transient negative voltage of -50V with respect to VSS."
      },
      {
        "number": "4",
        "name": "VB(V)",
        "type": "power_in",
        "description": "V-phase high-side floating IC supply voltage; the high-side supply uses an integrated bootstrap circuit with a rising under-voltage threshold of 12.1V typ and a falling threshold of 10.4V typ."
      },
      {
        "number": "5",
        "name": "VS(W)",
        "type": "power_in",
        "description": "W-phase high-side floating IC supply offset; VS(W) is robust to a transient negative voltage of -50V with respect to VSS."
      },
      {
        "number": "6",
        "name": "VB(W)",
        "type": "power_in",
        "description": "W-phase high-side floating IC supply voltage; the high-side supply uses an integrated bootstrap circuit with a rising under-voltage threshold of 12.1V typ and a falling threshold of 10.4V typ."
      },
      {
        "number": "7",
        "name": "HIN(U)",
        "type": "input",
        "description": "U-phase high-side gate driver input with positive logic and Schmitt-trigger thresholds compatible with LSTTL/CMOS down to 3.3V controller outputs; control pulses shorter than the 1µs recommended minimum should be avoided."
      },
      {
        "number": "8",
        "name": "HIN(V)",
        "type": "input",
        "description": "V-phase high-side gate driver input with positive logic and Schmitt-trigger thresholds compatible with LSTTL/CMOS down to 3.3V controller outputs; control pulses shorter than the 1µs recommended minimum should be avoided."
      },
      {
        "number": "9",
        "name": "HIN(W)",
        "type": "input",
        "description": "W-phase high-side gate driver input with positive logic and Schmitt-trigger thresholds compatible with LSTTL/CMOS down to 3.3V controller outputs; control pulses shorter than the 1µs recommended minimum should be avoided."
      },
      {
        "number": "10",
        "name": "LIN(U)",
        "type": "input",
        "description": "U-phase low-side gate driver input with positive logic and Schmitt-trigger thresholds compatible with LSTTL/CMOS down to 3.3V controller outputs; logic input voltage is limited to 0 to 5V."
      },
      {
        "number": "11",
        "name": "LIN(V)",
        "type": "input",
        "description": "V-phase low-side gate driver input with positive logic and Schmitt-trigger thresholds compatible with LSTTL/CMOS down to 3.3V controller outputs; logic input voltage is limited to 0 to 5V."
      },
      {
        "number": "12",
        "name": "LIN(W)",
        "type": "input",
        "description": "W-phase low-side gate driver input with positive logic and Schmitt-trigger thresholds compatible with LSTTL/CMOS down to 3.3V controller outputs; logic input voltage is limited to 0 to 5V."
      },
      {
        "number": "13",
        "name": "VDD",
        "type": "power_in",
        "description": "Low-side control supply for input logic and output power stage; operation at power-on needs at least 12.1V typ, and all gate drivers shut down when VDD falls below 10.4V typ."
      },
      {
        "number": "14",
        "name": "VFO",
        "type": "output",
        "description": "Fault output and direct NTC access referenced to VSS; it is an open-drain output that indicates VDD under-voltage or a triggered over-current at ITRIP and requires an external pull-up resistor."
      },
      {
        "number": "15",
        "name": "ITRIP",
        "type": "input",
        "description": "Over-current shutdown input referenced to VSS with a comparator threshold of 400 to 540mV (470mV typ) and a typical 530ns input noise filter, shutting down all outputs after a typical 1000ns propagation delay."
      },
      {
        "number": "16",
        "name": "VSS",
        "type": "power_in",
        "description": "Low-side control negative supply and reference ground for the input logic and the VFO/ITRIP thresholds."
      },
      {
        "number": "17",
        "name": "NW",
        "type": "passive",
        "description": "W-phase low-side emitter available for phase current measurement; the connection to VSS should be kept as short as possible to avoid unnecessary inductive voltage drops."
      },
      {
        "number": "18",
        "name": "NV",
        "type": "passive",
        "description": "V-phase low-side emitter available for phase current measurement; the connection to VSS should be kept as short as possible to avoid unnecessary inductive voltage drops."
      },
      {
        "number": "19",
        "name": "NU",
        "type": "passive",
        "description": "U-phase low-side emitter available for phase current measurement; the connection to VSS should be kept as short as possible to avoid unnecessary inductive voltage drops."
      },
      {
        "number": "20",
        "name": "W",
        "type": "output",
        "description": "Motor W-phase connection, forming the high-side emitter and low-side collector of the W leg."
      },
      {
        "number": "21",
        "name": "V",
        "type": "power_in",
        "description": "Motor V-phase connection, forming the high-side emitter and low-side collector of the V leg."
      },
      {
        "number": "22",
        "name": "U",
        "type": "output",
        "description": "Motor U-phase connection, forming the high-side emitter and low-side collector of the U leg."
      },
      {
        "number": "23",
        "name": "P",
        "type": "power_in",
        "description": "Positive DC bus input to the high-side IGBTs; the bus voltage must not exceed 450V (surge limit 500V)."
      },
      {
        "number": "24",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet does not print the name 'DIP-24'; it describes the part as a fully isolated Dual In-Li; Pin types for VS(U/V/W) and VB(U/V/W) are set to power_in because they supply the floating high-side"
        ],
        "pages_sent": 17,
        "cost_usd": 0.0761,
        "at": "2026-10-24T16:20:51"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/9461532fd8806e0e79d51e85950c590c.pdf",
        "pages": 17,
        "sha256": "40ab5e3310585958",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 24,
        "described": 24,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ikcm15l60gd.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          31.75,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "305ecc33779421c4eaa38993d80432e50eb6e02cae0807055a4a07ffcb2f0d2b",
        "checked": "2026-10-24",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ikcm15l60gd-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          31.75,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "0ed88f404729d116557b405e62c37d4b47a2da43c5a0c9ccb50d311306c3d8ea",
        "checked": "2026-10-24",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}