main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs iis3dwbtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers iis3dwbtr: viewers · Ray
iis3dwbtr-etched.fit.json iis3dwbtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iis3dwbtr-etched.glb iis3dwbtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iis3dwbtr-etched.step iis3dwbtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
iis3dwbtr.glb Publish 0.1.0 · Ray
iis3dwbtr.kicad_mod Publish 0.1.0 · Ray
iis3dwbtr.kicad_sym Publish 0.1.0 · Ray
iis3dwbtr.lbr Publish 0.1.0 · Ray
iis3dwbtr.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json iis3dwbtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md iis3dwbtr: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

IIS3DWBTR

STMicroelectronics · Accelerometers · LGA-14(2.5x3)

IIS3DWBTR from STMicroelectronics, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SDO/SA0 bidirectional SPI 4-wire interface serial data output (SDO). In I2C mode, this pin selects the least significant bit of the device address (SA0). Input without pull-up by default; pull-up enabled if SDO_PU_EN=1 in reg 02h.
2 RES passive Reserved. Connect to VDD_IO or GND.
3 RES passive Reserved. Connect to VDD_IO or GND.
4 INT1 output Programmable interrupt #1. Input with pull-down by default; must be set to 0 or left unconnected during device power-up. After power-up, connection is application specific.
5 VDD_IO power_in Power supply for I/O pins. Operational range 2.1 V to 3.6 V. Recommended 100 nF filter capacitor.
6 GND power_in Ground reference. Connect to GND.
7 GND power_in Ground reference. Connect to GND.
8 VDD power_in Main analog power supply. Operational range 2.1 V to 3.6 V (factory calibrated at 3.0 V). Recommended 100 nF filter capacitor.
9 INT2 output Programmable interrupt #2. Default state: output forced to GND. Application-specific connection.
10 RES passive Reserved. Connect to VDD_IO or leave pin electrically unconnected and soldered to PCB. Input with pull-up by default.
11 RES passive Reserved. Connect to VDD_IO or leave pin electrically unconnected and soldered to PCB. Input with pull-up by default.
12 CS input I2C/SPI mode selection. CS=1: SPI idle mode / I2C communication enabled. CS=0: SPI communication mode / I2C disabled. Input with pull-up by default; pull-up disabled if I2C_DISABLE=1 in reg 13h.
13 SPC/SCL input SPI serial port clock (SPC) / I2C serial clock (SCL). Input without pull-up.
14 SDI/SDO/SDA bidirectional SPI serial data input (SDI) / 3-wire interface serial data output (SDO) / I2C serial data (SDA). Input without pull-up by default.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package LGA-14(2.5x3)
Category Sensors
Pins 14

Ordering variants

Same part, different packaging or reel option.

  • IIS3DWBTR

CAD (KiCad official)

  • Symbol: IIS3DWBTR
  • Footprint: Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm
  • 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)
  • 3D model files: iis3dwbtr-etched.step / iis3dwbtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); iis3dwbtr.step / iis3dwbtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (59 pp, sha256 3ba84081777bf152, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF