← Commit history
README.mdadded+55@@ -0,0 +1,55 @@+# IIS3DWBTR++**STMicroelectronics** · Accelerometers · LGA-14(2.5x3)++IIS3DWBTR from STMicroelectronics, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SDO/SA0 | bidirectional | SPI 4-wire interface serial data output (SDO). In I2C mode, this pin selects the least significant bit of the device address (SA0). Input without pull-up by default; pull-up enabled if SDO_PU_EN=1 in reg 02h. |+| 2 | RES | passive | Reserved. Connect to VDD_IO or GND. |+| 3 | RES | passive | Reserved. Connect to VDD_IO or GND. |+| 4 | INT1 | output | Programmable interrupt #1. Input with pull-down by default; must be set to 0 or left unconnected during device power-up. After power-up, connection is application specific. |+| 5 | VDD_IO | power_in | Power supply for I/O pins. Operational range 2.1 V to 3.6 V. Recommended 100 nF filter capacitor. |+| 6 | GND | power_in | Ground reference. Connect to GND. |+| 7 | GND | power_in | Ground reference. Connect to GND. |+| 8 | VDD | power_in | Main analog power supply. Operational range 2.1 V to 3.6 V (factory calibrated at 3.0 V). Recommended 100 nF filter capacitor. |+| 9 | INT2 | output | Programmable interrupt #2. Default state: output forced to GND. Application-specific connection. |+| 10 | RES | passive | Reserved. Connect to VDD_IO or leave pin electrically unconnected and soldered to PCB. Input with pull-up by default. |+| 11 | RES | passive | Reserved. Connect to VDD_IO or leave pin electrically unconnected and soldered to PCB. Input with pull-up by default. |+| 12 | CS | input | I2C/SPI mode selection. CS=1: SPI idle mode / I2C communication enabled. CS=0: SPI communication mode / I2C disabled. Input with pull-up by default; pull-up disabled if I2C_DISABLE=1 in reg 13h. |+| 13 | SPC/SCL | input | SPI serial port clock (SPC) / I2C serial clock (SCL). Input without pull-up. |+| 14 | SDI/SDO/SDA | bidirectional | SPI serial data input (SDI) / 3-wire interface serial data output (SDO) / I2C serial data (SDA). Input without pull-up by default. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LGA-14(2.5x3) |+| Category | Sensors |+| Pins | 14 |++## Ordering variants++Same part, different packaging or reel option.++- `IIS3DWBTR`++## CAD (KiCad official)++- Symbol: `IIS3DWBTR`+- Footprint: `Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm`+- 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588885255956664320) (59 pp, sha256 `3ba84081777bf152`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/iis3dwbtr-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "iis3dwbtr",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Accelerometers, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "sensors",+ "iis3dwbtr"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "iis3dwbtr.kicad_sym",+ "iis3dwbtr.kicad_mod",+ "iis3dwbtr.glb",+ "iis3dwbtr.step",+ "iis3dwbtr.lbr",+ "docs/hero.png",+ "docs/iis3dwbtr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}