← Commit history

iis3dwbtr: factory component page (tier=lcsc)

Ray ·015180518e · ·parent 759c499
1 file changed +158−8
page.json+158−8
@@ -1,13 +1,168 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "iis3dwbtr",+  "title": "IIS3DWBTR",+  "brief": "STMicroelectronics Accelerometers, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "STMicroelectronics Accelerometers, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "sensors",     "iis3dwbtr"   ],+  "component": {+    "mpn": "IIS3DWBTR",+    "manufacturer": "STMicroelectronics",+    "package": "LGA-14(2.5x3)",+    "pin_count": 14,+    "category": "Sensors",+    "subcategory": "Accelerometers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588885255956664320",+    "parts": {+      "symbol": "iis3dwbtr.kicad_sym",+      "footprint": "iis3dwbtr.kicad_mod",+      "model_3d": "iis3dwbtr.glb",+      "model_3d_step": "iis3dwbtr.step",+      "lbr": "iis3dwbtr.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "SDO/SA0",+        "type": "bidirectional",+        "description": "SPI 4-wire interface serial data output (SDO). In I2C mode, this pin selects the least significant bit of the device address (SA0). Input without pull-up by default; pull-up enabled if SDO_PU_EN=1 in reg 02h."+      },+      {+        "number": "2",+        "name": "RES",+        "type": "passive",+        "description": "Reserved. Connect to VDD_IO or GND."+      },+      {+        "number": "3",+        "name": "RES",+        "type": "passive",+        "description": "Reserved. Connect to VDD_IO or GND."+      },+      {+        "number": "4",+        "name": "INT1",+        "type": "output",+        "description": "Programmable interrupt #1. Input with pull-down by default; must be set to 0 or left unconnected during device power-up. After power-up, connection is application specific."+      },+      {+        "number": "5",+        "name": "VDD_IO",+        "type": "power_in",+        "description": "Power supply for I/O pins. Operational range 2.1 V to 3.6 V. Recommended 100 nF filter capacitor."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference. Connect to GND."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference. Connect to GND."+      },+      {+        "number": "8",+        "name": "VDD",+        "type": "power_in",+        "description": "Main analog power supply. Operational range 2.1 V to 3.6 V (factory calibrated at 3.0 V). Recommended 100 nF filter capacitor."+      },+      {+        "number": "9",+        "name": "INT2",+        "type": "output",+        "description": "Programmable interrupt #2. Default state: output forced to GND. Application-specific connection."+      },+      {+        "number": "10",+        "name": "RES",+        "type": "passive",+        "description": "Reserved. Connect to VDD_IO or leave pin electrically unconnected and soldered to PCB. Input with pull-up by default."+      },+      {+        "number": "11",+        "name": "RES",+        "type": "passive",+        "description": "Reserved. Connect to VDD_IO or leave pin electrically unconnected and soldered to PCB. Input with pull-up by default."+      },+      {+        "number": "12",+        "name": "CS",+        "type": "input",+        "description": "I2C/SPI mode selection. CS=1: SPI idle mode / I2C communication enabled. CS=0: SPI communication mode / I2C disabled. Input with pull-up by default; pull-up disabled if I2C_DISABLE=1 in reg 13h."+      },+      {+        "number": "13",+        "name": "SPC/SCL",+        "type": "input",+        "description": "SPI serial port clock (SPC) / I2C serial clock (SCL). Input without pull-up."+      },+      {+        "number": "14",+        "name": "SDI/SDO/SDA",+        "type": "bidirectional",+        "description": "SPI serial data input (SDI) / 3-wire interface serial data output (SDO) / I2C serial data (SDA). Input without pull-up by default."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588885255956664320",+        "pages": 59,+        "sha256": "3ba84081777bf152",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 14,+        "described": 14,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "STMicroelectronics",+      "Package": "LGA-14(2.5x3)",+      "Category": "Sensors",+      "Pins": "14"+    }+  },+  "variants": [+    {+      "mpn": "IIS3DWBTR",+      "kind": "packaging"+    }+  ],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "iis3dwbtr"+  ],+  "discovery_pitch": "IIS3DWBTR (STMicroelectronics) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +180,5 @@     "docs/iis3dwbtr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file