← Commit history

Initial commit: component/iim-42352

Ray ·ab3ddc32e8 ·
2 files changed +229
README.mdadded+50
@@ -0,0 +1,50 @@+# IIM-42352++**TDK InvenSense** · Accelerometers · LGA-14(2.5x3)++IIM-42352 from TDK InvenSense, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AP_SDO / AP_AD0 | bidirectional | SPI serial data output in 4-wire mode or I2C/I3C slave address LSB selection pin with configurable pull-up and pull-down. |+| 2 | RESV | unconnected | Reserved pin; no connect or connect to GND with optional pull-up enablement via PIN2_PU_EN register. |+| 3 | RESV | unconnected | Reserved pin; no connect or connect to GND with optional pull-up enablement via PIN3_PU_EN register. |+| 4 | INT1 / INT | output | Interrupt 1 output supporting both push-pull and open-drain drive circuits with optional pull-down and alternative function as all-interrupts-mapped pin. |+| 5 | VDDIO | power_in | IO power supply voltage input with operating range 1.71V to 3.6V requiring 10nF bypass capacitor. |+| 6 | GND | power_in | Power supply ground connection. |+| 7 | RESV | unconnected | Reserved pin; must connect to GND with optional pull-up enablement via PIN7_PU_EN register. |+| 8 | VDD | power_in | Primary power supply voltage input with operating range 1.71V to 3.6V requiring 0.1µF and 2.2µF bypass capacitors. |+| 9 | INT2 / FSYNC / CLKIN | bidirectional | Multi-function pin supporting Interrupt 2 output, frame sync input, or external clock input (31-50 kHz) selectable via PIN9_FUNCTION and mode registers with optional pull-down. |+| 10 | RESV | unconnected | Reserved pin; no connect or connect to GND with pull-up enabled by default and disableable via PIN10_PU_EN register. |+| 11 | RESV | unconnected | Reserved pin; no connect or connect to GND with pull-up enabled by default and disableable via PIN11_PU_EN register. |+| 12 | AP_CS | input | SPI chip select input active low or must connect to VDDIO when using I2C/I3C interface with configurable pull-up and pull-down. |+| 13 | AP_SCL / AP_SCLK | input | I2C serial clock (open-drain, 1 MHz maximum) or SPI serial clock input (24 MHz maximum) with configurable pull-up and pull-down. |+| 14 | AP_SDA / AP_SDIO / AP_SDI | bidirectional | I2C serial data (open-drain), SPI serial data I/O 3-wire mode, or SPI serial data input 4-wire mode with configurable pull-up and pull-down. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | TDK InvenSense |+| Package | LGA-14(2.5x3) |+| Category | Sensors |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `IIM-42352`+- Footprint: `Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm`+- 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)+- 3D model files: `iim-42352-etched.step` / `iim-42352-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `iim-42352.step` / `iim-42352.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [TDK InvenSense datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589040630093238272) (99 pp, sha256 `65b3ee9c5a25dfe3`, retrieved 2026-09-17, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/iim-42352-datasheet.pdf)
page.jsonadded+179
@@ -0,0 +1,179 @@+{+  "slug": "iim-42352",+  "version": "0.1.0",+  "type": "component",+  "description": "TDK InvenSense Accelerometers, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "sensors",+    "iim-42352",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "iim-42352.kicad_sym",+    "iim-42352.kicad_mod",+    "iim-42352.glb",+    "iim-42352.step",+    "iim-42352.lbr",+    "docs/hero.png",+    "docs/iim-42352-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "IIM-42352",+    "manufacturer": "TDK InvenSense",+    "package": "LGA-14(2.5x3)",+    "pin_count": 14,+    "category": "Sensors",+    "subcategory": "Accelerometers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589040630093238272",+    "parts": {+      "symbol": "iim-42352.kicad_sym",+      "footprint": "iim-42352.kicad_mod",+      "model_3d": "iim-42352-etched.glb",+      "model_3d_plain": "iim-42352.glb",+      "model_3d_step": "iim-42352-etched.step",+      "model_3d_step_plain": "iim-42352.step",+      "lbr": "iim-42352.lbr"+    },+    "distributor_links": {+      "lcsc": "C3031476"+    },+    "pins": [+      {+        "number": "1",+        "name": "AP_SDO / AP_AD0",+        "type": "bidirectional",+        "description": "SPI serial data output in 4-wire mode or I2C/I3C slave address LSB selection pin with configurable pull-up and pull-down."+      },+      {+        "number": "2",+        "name": "RESV",+        "type": "unconnected",+        "description": "Reserved pin; no connect or connect to GND with optional pull-up enablement via PIN2_PU_EN register."+      },+      {+        "number": "3",+        "name": "RESV",+        "type": "unconnected",+        "description": "Reserved pin; no connect or connect to GND with optional pull-up enablement via PIN3_PU_EN register."+      },+      {+        "number": "4",+        "name": "INT1 / INT",+        "type": "output",+        "description": "Interrupt 1 output supporting both push-pull and open-drain drive circuits with optional pull-down and alternative function as all-interrupts-mapped pin."+      },+      {+        "number": "5",+        "name": "VDDIO",+        "type": "power_in",+        "description": "IO power supply voltage input with operating range 1.71V to 3.6V requiring 10nF bypass capacitor."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Power supply ground connection."+      },+      {+        "number": "7",+        "name": "RESV",+        "type": "unconnected",+        "description": "Reserved pin; must connect to GND with optional pull-up enablement via PIN7_PU_EN register."+      },+      {+        "number": "8",+        "name": "VDD",+        "type": "power_in",+        "description": "Primary power supply voltage input with operating range 1.71V to 3.6V requiring 0.1µF and 2.2µF bypass capacitors."+      },+      {+        "number": "9",+        "name": "INT2 / FSYNC / CLKIN",+        "type": "bidirectional",+        "description": "Multi-function pin supporting Interrupt 2 output, frame sync input, or external clock input (31-50 kHz) selectable via PIN9_FUNCTION and mode registers with optional pull-down."+      },+      {+        "number": "10",+        "name": "RESV",+        "type": "unconnected",+        "description": "Reserved pin; no connect or connect to GND with pull-up enabled by default and disableable via PIN10_PU_EN register."+      },+      {+        "number": "11",+        "name": "RESV",+        "type": "unconnected",+        "description": "Reserved pin; no connect or connect to GND with pull-up enabled by default and disableable via PIN11_PU_EN register."+      },+      {+        "number": "12",+        "name": "AP_CS",+        "type": "input",+        "description": "SPI chip select input active low or must connect to VDDIO when using I2C/I3C interface with configurable pull-up and pull-down."+      },+      {+        "number": "13",+        "name": "AP_SCL / AP_SCLK",+        "type": "input",+        "description": "I2C serial clock (open-drain, 1 MHz maximum) or SPI serial clock input (24 MHz maximum) with configurable pull-up and pull-down."+      },+      {+        "number": "14",+        "name": "AP_SDA / AP_SDIO / AP_SDI",+        "type": "bidirectional",+        "description": "I2C serial data (open-drain), SPI serial data I/O 3-wire mode, or SPI serial data input 4-wire mode with configurable pull-up and pull-down."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin 1 has dual interface function: operates as SPI serial data output in 4-wire mode or as I2C/I3C a; Pin 9 is tri-functional with register-selectable modes (INT2 output, FSYNC input, or CLKIN input 31–; Reserved pins 2, 3, 7, 10, 11 have configurable pull-ups with different defaults; designer should ve"+        ],+        "pages_sent": 99,+        "cost_usd": 0.6574,+        "at": "2026-09-17T21:30:36"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589040630093238272",+        "pages": 99,+        "sha256": "65b3ee9c5a25dfe3",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 14,+        "described": 14,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file