Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

IHLP3232DZER3R3M11

Vishay / Dale · Inductors, Coils, Chokes · Nonstandard

IHLP3232DZER3R3M11 from Vishay / Dale, in a Nonstandard. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table and the footprint is an Adom_Gen land derived from the manufacturer drawing; the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 1 passive Terminal 1 of an unpolarised inductor or ferrite bead; either orientation.
2 2 passive Terminal 2 of an unpolarised inductor or ferrite bead; either orientation.

Key specifications

Parameter Value
Manufacturer Vishay / Dale
Package Nonstandard
Category Inductors, Coils, Chokes
Pins 2

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Inductance tolerance -20 20 % 2
DC resistance max DCR 14.9 mΩ 25 °C 1
Operating temperature range -55 125 °C 1
Rated operating voltage 50 V across inductor 1
Inductance L0 3.3 μH AT 100 kHz, 0.25 V, 0 A 1
DC resistance typ DCR 14 mΩ 25 °C 1
Heat rating current 10.5 A DC current that causes an approximate ΔT of 40 °C 1
Saturation current 9.7 A DC current that causes L0 to drop approximately 20 % 1
Self-resonant frequency SRF 22 MHz 1

CAD (Adom-generated)

  • Symbol: IHLP3232DZER3R3M11
  • Footprint: Adom_Gen:Vishay_Dale_IHLP3232_7d147f
  • 3D model: generated to fit the land (STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Vishay / Dale datasheet (7 pp, sha256 3705b130643e65b8, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins, primary two-terminal convention (convention), consensus off (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing. 3D model generated to fit that land.

Datasheet PDF