Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ICM7555IPAZ

Intersil(Renesas Electronics) · Timers / Clock Oscillators · DIP-8

ICM7555IPAZ from Intersil(Renesas Electronics), in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground; common return for the timer, tied to V- for the input limits of GND -0.3V.
2 TRIGGER input Negative-edge trigger input that sets the flip-flop and drives OUTPUT high when below 1/3 V+; dominates over THRESHOLD, with input current of 10pA typ (50nA max) at VDD = 15V.
3 OUTPUT output CMOS inverter output that can source or sink currents large enough to drive TTL loads, with output current rated to 100mA absolute maximum.
4 RESET input Active-low reset that dominates all other inputs, forcing OUTPUT low and the discharge switch on, with trip voltage of about 0.6V to 0.7V.
5 CONTROL VOLTAGE input Sets the THRESHOLD and TRIGGER comparator trip voltages (nominally 2/3 V+) for frequency modulation or delay adjustment, and need not be decoupled with a capacitor.
6 THRESHOLD input Comparator input that resets the flip-flop when above 2/3 V+, with input current of 10pA typ (50nA max) at VDD = 15V.
7 DISCHARGE passive Open-drain discharge switch output that discharges the external timing capacitor when the flip-flop is reset, with leakage of 50nA max at VDD = 15V and sink capability of 15mA.
8 VDD power_in Positive supply, guaranteed operating range of 2V to 18V (18V absolute maximum).

Key specifications

Parameter Value
Manufacturer Intersil(Renesas Electronics)
Package DIP-8
Category Clock and Timing
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Static Supply Current IDD 40 200 μA ICM7555, VDD = 5V, TA=+25°C 3
Static Supply Current IDD 60 300 μA ICM7555, VDD = 15V, TA=+25°C 3
Threshold Voltage VTH 62 67 71 % VDD VDD = 15V, TA=+25°C 3
Trigger Voltage VTRIG 28 32 36 % VDD VDD = 15V, TA=+25°C 3
Control Voltage VCV 62 67 71 % VDD VDD = 15V, TA=+25°C 3
Trigger Current ITRIG 10 50 nA VDD = 15V, TA=+25°C 3
Threshold Current ITH 10 50 nA VDD = 15V, TA=+25°C 3
Reset Voltage VRST 0.4 1 V VDD = 2V to 15V, TA=+25°C 4
Reset Current IRST 10 50 nA VDD = 15V, TA=+25°C 4
Discharge Leakage IDIS 10 50 nA VDD = 15V, TA=+25°C 4
Output Low Voltage VOL 0.4 1 V VDD = 15V, ISINK = 20mA, TA=+25°C 4
Output Low Voltage VOL 0.2 0.4 V VDD = 5V, ISINK = 3.2mA, TA=+25°C 4
Output High Voltage VOH 14.3 14.6 V VDD = 15V, ISOURCE = 0.8mA, TA=+25°C 4
Output High Voltage VOH 4 4.3 V VDD = 5V, ISOURCE = 0.8mA, TA=+25°C 4
Discharge Output Voltage VDIS 0.2 0.4 V VDD = 5V, ISINK = 15mA, TA=+25°C 4
Supply Voltage VDD 2 18 V Functional Operation, TA=+25°C 4
Monostable Timing Accuracy 2 % RA = 10K, C = 0.1μF, VDD = 5V 3
Monostable Drift with Temperature 150 ppm/°C VDD = 5V 3
Monostable Drift with Temperature 200 ppm/°C VDD = 10V 3
Monostable Drift with Temperature 250 ppm/°C VDD = 15V 3
Monostable Drift with Supply 0.5 %/V VDD = 5V to 15V 3
Astable Timing Accuracy 2 % RA = RB = 10K, C = 0.1μF, VDD = 5V 3
Astable Drift with Temperature 150 ppm/°C VDD = 5V 3
Astable Drift with Temperature 200 ppm/°C VDD = 10V 3
Astable Drift with Temperature 250 ppm/°C VDD = 15V 3
Astable Drift with Supply 0.5 %/V VDD = 5V to 15V 3
Output Rise Time tR 75 ns RL = 10M, CL = 10pF, VDD = 5V 4
Output Fall Time tF 75 ns RL = 10M, CL = 10pF, VDD = 5V 4
Oscillator Frequency fMAX 1 MHz VDD = 5V, RA = 470Ω, RB = 270Ω, C = 200pF 4
Supply Voltage V+ 18 V 3
Input Voltage (Trigger, Control Voltage, Threshold, Reset) -0.3 0.3 V printed as V+ +0.3V to GND -0.3V 3
Output Current 100 mA 3
Operating Temperature Range (ICM7555I) -25 85 °C 3
Thermal Resistance Junction-Ambient, 8 Lead PDIP θJA 130 °C/W Typical, low effective thermal conductivity test board in free air 3
Maximum Junction Temperature (Plastic Package) 150 °C 3
Storage Temperature Range -65 150 °C 3
Maximum Lead Temperature 300 °C Soldering 10s 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin solder dip or tin plate lead finish is applied. 3. Dimensions b1 and c1 apply to lead base metal only. Dimension 12

CAD (KiCad official)

  • Symbol: ICM7555IPAZ
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: icm7555ipaz-etched.step / icm7555ipaz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); icm7555ipaz.step / icm7555ipaz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Intersil(Renesas Electronics) datasheet (12 pp, sha256 3d3b89e1fe3fd666, retrieved 2026-10-23, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF