main
Ray Publish 0.1.0 bba6473
{
  "slug": "icm7555esa",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Inc./Maxim Integrated Timers / Clock Oscillators, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "rtc-clock chip",
    "icm7555esa+",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "icm7555esa.kicad_sym",
    "icm7555esa.kicad_mod",
    "icm7555esa.glb",
    "icm7555esa.step",
    "icm7555esa.lbr",
    "docs/hero.png",
    "docs/icm7555esa-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "icm7555esa-hero.glb",
    "icm7555esa-hero.overlay.json",
    "icm7555esa-etched.glb"
  ],
  "component": {
    "mpn": "ICM7555ESA+",
    "manufacturer": "Analog Devices Inc./Maxim Integrated",
    "package": "SOIC-8",
    "pin_count": 8,
    "category": "RTC/Clock Chip",
    "subcategory": "Timers / Clock Oscillators",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/icm7555-icm7556.pdf",
    "parts": {
      "symbol": "icm7555esa.kicad_sym",
      "footprint": "icm7555esa.kicad_mod",
      "model_3d": "icm7555esa-hero.glb",
      "model_3d_plain": "icm7555esa-etched.glb",
      "model_3d_step": "icm7555esa-etched.step",
      "model_3d_step_plain": "icm7555esa.step",
      "lbr": "icm7555esa.lbr"
    },
    "distributor_links": {
      "lcsc": "C7452742",
      "digikey": "ICM7555ESA+-ND",
      "mouser": "700-ICM7555ESA"
    },
    "distributor_check": {
      "checked_at": "2026-10-29T02:54:35Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "ICM7555ESA+-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "700-ICM7555ESA",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the timer; connect to the negative supply (V- reference for the latchup limit of V- - 0.3V)."
      },
      {
        "number": "2",
        "name": "TRIGGER",
        "type": "input",
        "description": "Trigger input that sets the output high when below 1/3 V+ (0.29 to 0.34 V+ at 5V) and starts the timing cycle, with input current of 10pA typical at 5V."
      },
      {
        "number": "3",
        "name": "OUTPUT",
        "type": "output",
        "description": "CMOS output stage that swings to the supply voltage, sinks 3.2mA with 0.4V max low drop and sources 1.0mA to 2.0mA, driving at least two TTL loads at 4.5V or greater."
      },
      {
        "number": "4",
        "name": "RESET",
        "type": "input",
        "description": "Active-low reset with a trip voltage of 0.4V to 1.0V (0.7V typical) that dominates all other inputs and controls only the internal flip-flop, with extremely high input impedance."
      },
      {
        "number": "5",
        "name": "CONTROL VOLTAGE",
        "type": "input",
        "description": "Control voltage input that sets the THRESHOLD and TRIGGER comparator trip points (0.66 V+ typical at 5V), usable for frequency modulation, and needs no decoupling capacitor."
      },
      {
        "number": "6",
        "name": "THRESHOLD",
        "type": "input",
        "description": "Threshold comparator input that drives the output low and turns on the discharge switch when above 2/3 V+ (0.63 to 0.67 V+ at 5V), with 10pA typical input current at 5V."
      },
      {
        "number": "7",
        "name": "DISCHARGE",
        "type": "passive",
        "description": "Open discharge switch output that discharges the external timing capacitor when the output is low, with 0.1V typical (0.4V max) drop at 3.2mA and 5V supply."
      },
      {
        "number": "8",
        "name": "V+",
        "type": "power_in",
        "description": "Positive supply pin with a 2V to 18V operating range (2V to 16.5V in the Maxim Advantage specification) and an 18V absolute maximum."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text+vision",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: DISCHARGE is typed passive because it is an open discharge switch output. An engineer may prefer ope; The top-view SO-8 drawing is shared with the PDIP and shows pin numbers 1-8 in the same arrangement.",
          "vision extraction: provenance cannot be text-verified; needs consensus"
        ],
        "pages_sent": 11,
        "cost_usd": 0.2933,
        "at": "2026-10-29T02:54:20"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/icm7555-icm7556.pdf",
        "pages": 11,
        "sha256": "30fd218015c11427",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "icm7555esa.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "icm7555esa-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "651fec0221110309ae2ef04794d4a5d000ee3d4dbf4e1d1ff731923432abd51f",
        "checked": "2026-10-29",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}