main
History Download
Ray Publish 0.1.0 bba6473

ICM7555ESA+

Analog Devices Inc./Maxim Integrated · Timers / Clock Oscillators · SOIC-8

ICM7555ESA+ from Analog Devices Inc./Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground reference for the timer; connect to the negative supply (V- reference for the latchup limit of V- - 0.3V).
2 TRIGGER input Trigger input that sets the output high when below 1/3 V+ (0.29 to 0.34 V+ at 5V) and starts the timing cycle, with input current of 10pA typical at 5V.
3 OUTPUT output CMOS output stage that swings to the supply voltage, sinks 3.2mA with 0.4V max low drop and sources 1.0mA to 2.0mA, driving at least two TTL loads at 4.5V or greater.
4 RESET input Active-low reset with a trip voltage of 0.4V to 1.0V (0.7V typical) that dominates all other inputs and controls only the internal flip-flop, with extremely high input impedance.
5 CONTROL VOLTAGE input Control voltage input that sets the THRESHOLD and TRIGGER comparator trip points (0.66 V+ typical at 5V), usable for frequency modulation, and needs no decoupling capacitor.
6 THRESHOLD input Threshold comparator input that drives the output low and turns on the discharge switch when above 2/3 V+ (0.63 to 0.67 V+ at 5V), with 10pA typical input current at 5V.
7 DISCHARGE passive Open discharge switch output that discharges the external timing capacitor when the output is low, with 0.1V typical (0.4V max) drop at 3.2mA and 5V supply.
8 V+ power_in Positive supply pin with a 2V to 18V operating range (2V to 16.5V in the Maxim Advantage specification) and an 18V absolute maximum.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc./Maxim Integrated
Package SOIC-8
Category RTC/Clock Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage V+ 2 18 V -20°C ≤ TA ≤ +70°C 2
Supply Voltage V+ 3 16 V -55°C ≤ TA ≤ +125°C 2
Supply Current (ICM7555) I+ 60 200 µA V+ = 2V 2
Supply Current (ICM7555) I+ 120 300 µA V+ = 18V 2
Initial Accuracy (timing error) 2 5 % RA, RB = 1kΩ to 100kΩ, C = 0.1µF, 5V ≤ V+ ≤ 15V 2
Drift with Supply Voltage 1 3 %/V V+ = 5V 2
Threshold Voltage VTH 0.63 0.66 0.67 V+ V+ = 5V 2
Trigger Voltage VTRIG 0.29 0.33 0.34 V+ V+ = 5V 2
Reset Voltage VRST 0.4 0.7 1 V V+ = 18V 3
Control Voltage Lead VCV 0.62 0.66 0.67 V V+ = 5V 3
Output Voltage Drop, Output Low VO 0.1 0.4 V V+ = 18V, ISINK = 3.2mA 3
Output Voltage Drop, Output Low VO 0.15 0.4 V V+ = 5V, ISINK = 3.2mA 3
Output Voltage, Output High VO 17.25 17.8 V V+ = 18V, ISOURCE = 1.0mA 3
Output Voltage, Output High VO 4 4.5 V V+ = 5V, ISOURCE = 1.0mA 3
Rise Time of Output tr 35 40 75 ns RL = 10MΩ, CL = 10pF, V+ = 5V 3
Fall Time of Output tf 35 40 75 ns RL = 10MΩ, CL = 10pF, V+ = 5V 3
Guaranteed Max Oscillator Frequency fmax 500 kHz Astable operation 3
Supply Voltage (absolute maximum) V+ 18 V 2
Output Current 100 mA 2
Power Dissipation (ICM7555) 200 mW ICM7555; see Note 2 for derating 2
Storage Temperature -65 150 °C 2
Lead Temperature (soldering) 300 °C soldering, 60s 2
Operating Temperature Range (ICM7555ESA) TA -40 85 °C ICM7555ESA, 8-pin SO, per ordering table 1
Junction Temperature TJ 135 °C Note 2: junction temperature should not exceed 2
Power Dissipation at +125°C 20 mW at +125°C, Note 2 2
Power Dissipation Derating (ICM7555) 2 mW/°C approximate, ICM7555, Note 2 2

CAD (KiCad official)

  • Symbol: ICM7555ESA+
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: icm7555esa-etched.step / icm7555esa-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); icm7555esa.step / icm7555esa.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc./Maxim Integrated datasheet (11 pp, sha256 30fd218015c11427, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF