main
Ray icm-45686: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 44e9526
{
  "schema_version": 1,
  "type": "component",
  "slug": "icm-45686",
  "title": "ICM-45686",
  "brief": "TDK InvenSense Attitude Sensor/Gyroscope, LGA-14(3x2.5). Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.2.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "sensor",
    "icm-45686"
  ],
  "component": {
    "mpn": "ICM-45686",
    "manufacturer": "TDK InvenSense",
    "package": "LGA-14(3x2.5)",
    "pin_count": 14,
    "category": "Sensor",
    "subcategory": "Attitude Sensor/Gyroscope",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/82be2696e3b990847ac9faedb9657bd1.pdf",
    "parts": {
      "symbol": "icm-45686.kicad_sym",
      "footprint": "icm-45686.kicad_mod",
      "model_3d": "icm-45686-etched.glb",
      "model_3d_plain": "icm-45686.glb",
      "model_3d_step": "icm-45686-etched.step",
      "model_3d_step_plain": "icm-45686.step",
      "lbr": "icm-45686.lbr"
    },
    "distributor_links": {},
    "pins": [
      {
        "number": "1",
        "name": "AP_SDO/AP_AD0",
        "type": "bidirectional",
        "description": "AP SPI serial data output in 4-wire SPI mode; AP I3C/I2C slave address LSB when using I3C/I2C. Configurable internal pull-up/pull-down (default pull-up enabled); disable internal pull-up when AP interface is active."
      },
      {
        "number": "2",
        "name": "RESV/AUX1_SDIO/AUX1_SDI/MAS_DA",
        "type": "bidirectional",
        "description": "Multi-function: AUX1 SPI serial data I/O (3-wire) or SDI (4-wire) in Dual Interface OIS mode; I2C master data (MAS_DA) in Dual Interface I2C Master mode; RESV (no connect or tie to VDDIO/GND) in Single Interface mode. Configurable internal pull-up/pull-down (default pull-up enabled)."
      },
      {
        "number": "3",
        "name": "RESV/AUX1_SCLK/MAS_CLK",
        "type": "bidirectional",
        "description": "AUX1 SPI serial clock in Dual Interface OIS mode; I2C master clock (MAS_CLK) in Dual Interface I2C Master mode; RESV (no connect or tie to VDDIO/GND) in Single Interface mode. Configurable internal pull-up/pull-down (default pull-up enabled)."
      },
      {
        "number": "4",
        "name": "INT1/INT",
        "type": "output",
        "description": "Programmable interrupt 1 output; can be configured as push-pull or open-drain. All interrupts can be mapped to pin 4. Configurable internal pull-up/pull-down (default pull-up disabled)."
      },
      {
        "number": "5",
        "name": "VDDIO",
        "type": "power_in",
        "description": "Digital I/O supply voltage. Typical 1.71-3.6 V (1.1 V min when I3C interface is used). Decouple with 0.1 µF (C2) to GND per typical operating circuit."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Power supply ground reference for both analog core (VDD) and digital I/O (VDDIO)."
      },
      {
        "number": "7",
        "name": "RESV",
        "type": "unconnected",
        "description": "Reserved. Leave as No Connect or tie to VDDIO or GND. Configurable internal pull-up/pull-down (default pull-up enabled); if left as NC, keep internal pull-up enabled; if tied to VDDIO/GND, disable internal pull-up."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Main analog/core power supply voltage. Typical 1.71-3.6 V. Decouple with 0.1 µF (C1) to GND per typical operating circuit."
      },
      {
        "number": "9",
        "name": "INT2/FSYNC/CLKIN",
        "type": "bidirectional",
        "description": "Programmable interrupt 2 output (push-pull or open-drain); alternatively frame-sync input (FSYNC) or external clock input (CLKIN). If unused, leave NC or tie to VDDIO. Configurable internal pull-up/pull-down (default pull-up enabled)."
      },
      {
        "number": "10",
        "name": "RESV/AUX1_CS",
        "type": "input",
        "description": "AUX1 SPI chip-select input in Dual Interface OIS mode; RESV (no connect or tie to VDDIO/GND) in Single Interface or I2C Master modes. Configurable internal pull-up/pull-down (default pull-up enabled)."
      },
      {
        "number": "11",
        "name": "RESV/AUX1_SDO",
        "type": "output",
        "description": "AUX1 SPI serial data output in Dual Interface OIS 4-wire mode (leave NC if unused); RESV (no connect or tie to VDDIO/GND) in Single Interface or I2C Master modes. Configurable internal pull-up/pull-down (default pull-up enabled)."
      },
      {
        "number": "12",
        "name": "AP_CS",
        "type": "input",
        "description": "AP SPI chip-select input for the host SPI interface; tie to VDDIO if using AP I3C/I2C interface. Configurable internal pull-up/pull-down (default pull-up enabled); disable internal pull-up when AP interface is active."
      },
      {
        "number": "13",
        "name": "AP_SCL/AP_SCLK",
        "type": "input",
        "description": "AP host serial clock: I3C/I2C serial clock (AP_SCL) or SPI serial clock (AP_SCLK), up to 12.9 MHz I3C, 1 MHz I2C, or 24 MHz SPI. Configurable internal pull-up/pull-down (default pull-up enabled); disable internal pull-up when AP interface is active."
      },
      {
        "number": "14",
        "name": "AP_SDA/AP_SDIO/AP_SDI",
        "type": "bidirectional",
        "description": "AP host serial data: I3C/I2C serial data (AP_SDA), SPI serial data I/O (AP_SDIO, 3-wire mode), or SPI serial data input (AP_SDI, 4-wire mode). Configurable internal pull-up/pull-down (default pull-up enabled); disable internal pull-up when AP interface is active."
      }
    ],
    "provenance": {
      "extractor": "ds2sf",
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/82be2696e3b990847ac9faedb9657bd1.pdf",
        "pages": 199,
        "sha256": "dbff9a161c741953",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "icm-45686.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          2.5,
          0.78
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "a441fc384db400c96db6affec2f9c22a5d76b0729e0f2fc46c53746be60b76ca",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "icm-45686-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3,
          2.5,
          0.78
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "57f6457c2a08b77e52f3587a432bee2fc3e8a78be618d5fed006a8669a21d0b1",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "TDK InvenSense",
      "Package": "LGA-14(3x2.5)",
      "Category": "Sensor",
      "Pins": "14"
    }
  },
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "icm-45686"
  ],
  "discovery_pitch": "ICM-45686 (TDK InvenSense) component page with datasheet-verified CAD.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "icm-45686.kicad_sym",
    "icm-45686.kicad_mod",
    "icm-45686.glb",
    "icm-45686.step",
    "icm-45686-etched.step",
    "icm-45686.lbr",
    "docs/hero.png",
    "docs/icm-45686-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "visibility": {
    "public": true
  },
  "updated_at": "2026-09-24T22:26:35.687Z"
}