component
ICL7660CSA
Public Made by Adomby adom
TDSEMIC Charge Pumps, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownICL7660CSA
TDSEMIC · Charge Pumps · SOP-8
ICL7660CSA from TDSEMIC, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOST | input | Oscillator frequency boost control; connect to V+ to increase internal oscillator frequency ×6; leave open (NC) when using an external oscillator signal at OSC. |
| 2 | CAP+ | passive | Positive terminal connection for the external charge-pump flying capacitor. |
| 3 | GND | power_in | Ground reference; the negative terminal of the reservoir capacitor connects here in most applications. |
| 4 | CAP- | passive | Negative terminal connection for the external charge-pump flying capacitor. |
| 5 | VOUT | power_out | Inverted (negative) voltage output; the positive terminal of the reservoir capacitor connects here in most applications. |
| 6 | LV | input | Low-voltage operation select; connect to GND when supply voltage is below 3.5 V to maintain proper operation. |
| 7 | OSC | input | Oscillator frequency control input; connect an external capacitor to GND at this pin to reduce the internal oscillator frequency below its default. |
| 8 | V+ | power_in | Positive supply voltage input, 1.5 V to 10 V; also serves as the chip's internal reference connection point. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TDSEMIC |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
ICL7660CSA - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
icl7660csa-etched.step/icl7660csa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);icl7660csa.step/icl7660csa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TDSEMIC datasheet (5 pp, sha256
d4dcedcc09abdb78, retrieved 2026-09-21, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-sonnet-4-6(vision), consensusclaude-opus-4-7(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).