main
Ray
Publish 0.1.0
7a89c1e
ICL7660CBAZA
RENESAS · DC-DC Converters · SOIC-8
ICL7660CBAZA from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection is made to this pin in the 8-lead SOIC/PDIP package. |
| 2 | CAP+ | passive | Positive terminal of pump capacitor C1, which must be a polarized capacitor connected to pin 2 when used with polarized capacitors. |
| 3 | GND | power_in | Ground reference; the positive terminal of reservoir capacitor C2 connects here, and the output must not be driven more positive than this pin or the device latches up. |
| 4 | CAP- | passive | Negative terminal of the charge pump capacitor C1 in the inverter circuit. |
| 5 | VOUT | power_out | Negative converter output (-VOUT) that must not be driven more positive than GND (pin 3) to avoid device latchup. |
| 6 | LV | input | Tie to GROUND to bypass the internal series regulator for better low-voltage operation, and leave floating for supply voltages above 3.5V to prevent latchup. |
| 7 | OSC | input | Oscillator terminal where an external capacitor lowers the nominal 10kHz oscillator frequency, or an external clock may overdrive it through a 1kΩ series resistor. |
| 8 | V+ | power_in | Positive supply input, rated 1.5V to 10.0V for ICL7660 and 1.5V to 12.0V for ICL7660A. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Power Management |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Current | I+ | 170 | 500 | µA | RL = ∞ | 3 | |
| Supply Voltage Range - Lo | VL+ | 1.5 | 3.5 | V | MIN ≤ TA ≤ MAX, RL = 10kΩ, LV to GND | 3 | |
| Supply Voltage Range - Hi | VH+ | 3 | 10 | V | MIN ≤ TA ≤ MAX, RL = 10kΩ, LV to Open | 3 | |
| Output Source Resistance | ROUT | 55 | 100 | Ω | IOUT = 20mA, TA = 25°C | 3 | |
| Output Source Resistance | ROUT | 120 | Ω | IOUT = 20mA, 0°C ≤ TA ≤ 70°C | 3 | ||
| Output Source Resistance | ROUT | 150 | Ω | IOUT = 20mA, -55°C ≤ TA ≤ 125°C | 3 | ||
| Output Source Resistance | ROUT | 300 | Ω | V+ = 2V, IOUT = 3mA, LV to GND, 0°C ≤ TA ≤ 70°C | 3 | ||
| Output Source Resistance | ROUT | 400 | Ω | V+ = 2V, IOUT = 3mA, LV to GND, -55°C ≤ TA ≤ 125°C | 3 | ||
| Oscillator Frequency | fOSC | 10 | kHz | 3 | |||
| Power Efficiency | PEF | 95 | 98 | % | RL = 5kΩ | 3 | |
| Voltage Conversion Efficiency | VOUTEFF | 97 | 99.9 | % | RL = ∞ | 3 | |
| Oscillator Impedance | ZOSC | 1 | MΩ | V+ = 2V | 3 | ||
| Oscillator Impedance | ZOSC | 100 | kΩ | V+ = 5V | 3 | ||
| Supply Voltage | 10.5 | V | ICL7660 | 3 | |||
| LV and OSC Input Voltage | -0.3 | V | For V+ < 5.5V; maximum is V+ +0.3V | 3 | |||
| Current into LV | 20 | µA | For V+ > 3.5V | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | Maximum storage temperature range | 3 | ||
| Maximum Lead Temperature (Soldering) | 300 | °C | Soldering, 10s, SOIC lead tips only | 3 | |||
| Operating Temperature Range | TA | 0 | 70 | °C | ICL7660C | 3 | |
| Thermal Resistance Junction-to-Ambient | θJA | 160 | °C/W | SOIC package, typical, measured with component mounted on evaluation PC board in free air | 3 |
CAD (KiCad official)
- Symbol:
ICL7660CBAZA - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
icl7660cbaza-etched.step/icl7660cbaza-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);icl7660cbaza.step/icl7660cbaza.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (11 pp, sha256
4e1b7423fbeb1806, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ICL7660CBAZA
**RENESAS** · DC-DC Converters · SOIC-8
ICL7660CBAZA from RENESAS, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No internal connection is made to this pin in the 8-lead SOIC/PDIP package. |
| 2 | CAP+ | passive | Positive terminal of pump capacitor C1, which must be a polarized capacitor connected to pin 2 when used with polarized capacitors. |
| 3 | GND | power_in | Ground reference; the positive terminal of reservoir capacitor C2 connects here, and the output must not be driven more positive than this pin or the device latches up. |
| 4 | CAP- | passive | Negative terminal of the charge pump capacitor C1 in the inverter circuit. |
| 5 | VOUT | power_out | Negative converter output (-VOUT) that must not be driven more positive than GND (pin 3) to avoid device latchup. |
| 6 | LV | input | Tie to GROUND to bypass the internal series regulator for better low-voltage operation, and leave floating for supply voltages above 3.5V to prevent latchup. |
| 7 | OSC | input | Oscillator terminal where an external capacitor lowers the nominal 10kHz oscillator frequency, or an external clock may overdrive it through a 1kΩ series resistor. |
| 8 | V+ | power_in | Positive supply input, rated 1.5V to 10.0V for ICL7660 and 1.5V to 12.0V for ICL7660A. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-8 |
| Category | Power Management |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Current | I+ | | 170 | 500 | µA | RL = ∞ | 3 |
| Supply Voltage Range - Lo | VL+ | 1.5 | | 3.5 | V | MIN ≤ TA ≤ MAX, RL = 10kΩ, LV to GND | 3 |
| Supply Voltage Range - Hi | VH+ | 3 | | 10 | V | MIN ≤ TA ≤ MAX, RL = 10kΩ, LV to Open | 3 |
| Output Source Resistance | ROUT | | 55 | 100 | Ω | IOUT = 20mA, TA = 25°C | 3 |
| Output Source Resistance | ROUT | | | 120 | Ω | IOUT = 20mA, 0°C ≤ TA ≤ 70°C | 3 |
| Output Source Resistance | ROUT | | | 150 | Ω | IOUT = 20mA, -55°C ≤ TA ≤ 125°C | 3 |
| Output Source Resistance | ROUT | | | 300 | Ω | V+ = 2V, IOUT = 3mA, LV to GND, 0°C ≤ TA ≤ 70°C | 3 |
| Output Source Resistance | ROUT | | | 400 | Ω | V+ = 2V, IOUT = 3mA, LV to GND, -55°C ≤ TA ≤ 125°C | 3 |
| Oscillator Frequency | fOSC | | 10 | | kHz | | 3 |
| Power Efficiency | PEF | 95 | 98 | | % | RL = 5kΩ | 3 |
| Voltage Conversion Efficiency | VOUTEFF | 97 | 99.9 | | % | RL = ∞ | 3 |
| Oscillator Impedance | ZOSC | | 1 | | MΩ | V+ = 2V | 3 |
| Oscillator Impedance | ZOSC | | 100 | | kΩ | V+ = 5V | 3 |
| Supply Voltage | | | | 10.5 | V | ICL7660 | 3 |
| LV and OSC Input Voltage | | -0.3 | | | V | For V+ < 5.5V; maximum is V+ +0.3V | 3 |
| Current into LV | | | | 20 | µA | For V+ > 3.5V | 3 |
| Storage Temperature Range | | -65 | | 150 | °C | Maximum storage temperature range | 3 |
| Maximum Lead Temperature (Soldering) | | | | 300 | °C | Soldering, 10s, SOIC lead tips only | 3 |
| Operating Temperature Range | TA | 0 | | 70 | °C | ICL7660C | 3 |
| Thermal Resistance Junction-to-Ambient | θJA | | 160 | | °C/W | SOIC package, typical, measured with component mounted on evaluation PC board in free air | 3 |
## CAD (KiCad official)
- Symbol: `ICL7660CBAZA`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `icl7660cbaza-etched.step` / `icl7660cbaza-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `icl7660cbaza.step` / `icl7660cbaza.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/icl7660cbaza-datasheet.pdf) (11 pp, sha256 `4e1b7423fbeb1806`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/icl7660cbaza-datasheet.pdf)