component
ICL7660CBAZ-T
Public Made by Adomby adom
Intersil(Renesas Electronics) DC-DC Converters, SOIC-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
ICL7660CBAZ-T
Intersil(Renesas Electronics) · DC-DC Converters · SOIC-8
ICL7660CBAZ-T from Intersil(Renesas Electronics), in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | The datasheet pinout labels this pin NC and gives it no electrical function. |
| 2 | CAP+ | passive | Positive terminal of the external pump capacitor C1, which must be connected to this pin when polarized capacitors are used. |
| 3 | GND | power_in | Ground reference; the output (pin 5) must not go more positive than this pin or the device can latch up. |
| 4 | CAP- | passive | Negative terminal of the external pump capacitor C1 in the charge pump, connected between pins 2 and 4 in the test circuit. |
| 5 | VOUT | power_out | Negative converter output that gives -V+ (or -nV+ when cascaded) and must not be driven more positive than GND. |
| 6 | LV | input | Low-voltage pin that is tied to GND for supply voltages up to 3.5V and must be left floating above 3.5V to prevent latchup. |
| 7 | OSC | input | Oscillator terminal where an external capacitor can lower the nominal 10kHz frequency or an external clock can overdrive it. |
| 8 | V+ | power_in | Positive supply input with a 1.5V to 10.0V operating range for the ICL7660 and 1.5V to 12.0V for the ICL7660A, with an absolute maximum of +10.5V and +13.0V respectively. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Intersil(Renesas Electronics) |
| Package | SOIC-8 |
| Category | Power Management ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Current | I+ | 170 | 500 | µA | RL = (as printed), V+ = 5V, TA = 25°C | 3 | |
| Supply Voltage Range - Lo | VL+ | 1.5 | 3.5 | V | MIN ≤ TA ≤ MAX, RL = 10k, LV to GND | 3 | |
| Supply Voltage Range - Hi | VH+ | 3 | 10 | V | MIN ≤ TA ≤ MAX, RL = 10k, LV to Open | 3 | |
| Output Source Resistance | ROUT | 55 | 100 | Ω | IOUT = 20mA, TA = 25°C | 3 | |
| Output Source Resistance | ROUT | 120 | Ω | IOUT = 20mA, 0°C ≤ TA ≤ 70°C | 3 | ||
| Output Source Resistance | ROUT | 150 | Ω | IOUT = 20mA, -55°C ≤ TA ≤ 125°C | 3 | ||
| Output Source Resistance | ROUT | 300 | Ω | V+ = 2V, IOUT = 3mA, LV to GND, 0°C ≤ TA ≤ 70°C | 3 | ||
| Output Source Resistance | ROUT | 400 | Ω | V+ = 2V, IOUT = 3mA, LV to GND, -55°C ≤ TA ≤ 125°C | 3 | ||
| Power Efficiency | PEF | 95 | 98 | % | RL = 5k | 3 | |
| Voltage Conversion Efficiency | VOUT EF | 97 | 99.9 | % | RL = (as printed) | 3 | |
| Supply Voltage | 10.5 | V | ICL7660 | 3 | |||
| LV and OSC Input Voltage | -0.3 | V | for V+ < 5.5V; upper limit (V+ + 0.3V); see Note 2 | 3 | |||
| Current into LV | 20 | µA | for V+ > 3.5V (Note 2) | 3 | |||
| Operating Temperature Range (ICL7660C) | 0 | 70 | °C | ICL7660C | 3 | ||
| Maximum Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Maximum Lead Temperature (Soldering) | 300 | °C | 10s, SOIC lead tips only | 3 | |||
| Oscillator Frequency | fOSC | 10 | kHz | 3 | |||
| Oscillator Impedance | ZOSC | 1 | MΩ | V+ = 2V | 3 | ||
| Oscillator Impedance | ZOSC | 100 | kΩ | V = 5V | 3 | ||
| Thermal Resistance, junction to ambient (SOIC) | θJA | 160 | °C/W | SOIC package, typical, measured in free air on evaluation PC board (Note 1) | 3 |
CAD (KiCad official)
- Symbol:
ICL7660CBAZ-T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
icl7660cbaz-t-etched.step/icl7660cbaz-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);icl7660cbaz-t.step/icl7660cbaz-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Intersil(Renesas Electronics) datasheet (11 pp, sha256
e3855fbeaa02c7db, retrieved 2026-10-27, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusoff(skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ICL7660CBAZ-T
**Intersil(Renesas Electronics)** · DC-DC Converters · SOIC-8
ICL7660CBAZ-T from Intersil(Renesas Electronics), in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | The datasheet pinout labels this pin NC and gives it no electrical function. |
| 2 | CAP+ | passive | Positive terminal of the external pump capacitor C1, which must be connected to this pin when polarized capacitors are used. |
| 3 | GND | power_in | Ground reference; the output (pin 5) must not go more positive than this pin or the device can latch up. |
| 4 | CAP- | passive | Negative terminal of the external pump capacitor C1 in the charge pump, connected between pins 2 and 4 in the test circuit. |
| 5 | VOUT | power_out | Negative converter output that gives -V+ (or -nV+ when cascaded) and must not be driven more positive than GND. |
| 6 | LV | input | Low-voltage pin that is tied to GND for supply voltages up to 3.5V and must be left floating above 3.5V to prevent latchup. |
| 7 | OSC | input | Oscillator terminal where an external capacitor can lower the nominal 10kHz frequency or an external clock can overdrive it. |
| 8 | V+ | power_in | Positive supply input with a 1.5V to 10.0V operating range for the ICL7660 and 1.5V to 12.0V for the ICL7660A, with an absolute maximum of +10.5V and +13.0V respectively. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Intersil(Renesas Electronics) |
| Package | SOIC-8 |
| Category | Power Management ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Current | I+ | | 170 | 500 | µA | RL = (as printed), V+ = 5V, TA = 25°C | 3 |
| Supply Voltage Range - Lo | VL+ | 1.5 | | 3.5 | V | MIN ≤ TA ≤ MAX, RL = 10k, LV to GND | 3 |
| Supply Voltage Range - Hi | VH+ | 3 | | 10 | V | MIN ≤ TA ≤ MAX, RL = 10k, LV to Open | 3 |
| Output Source Resistance | ROUT | | 55 | 100 | Ω | IOUT = 20mA, TA = 25°C | 3 |
| Output Source Resistance | ROUT | | | 120 | Ω | IOUT = 20mA, 0°C ≤ TA ≤ 70°C | 3 |
| Output Source Resistance | ROUT | | | 150 | Ω | IOUT = 20mA, -55°C ≤ TA ≤ 125°C | 3 |
| Output Source Resistance | ROUT | | | 300 | Ω | V+ = 2V, IOUT = 3mA, LV to GND, 0°C ≤ TA ≤ 70°C | 3 |
| Output Source Resistance | ROUT | | | 400 | Ω | V+ = 2V, IOUT = 3mA, LV to GND, -55°C ≤ TA ≤ 125°C | 3 |
| Power Efficiency | PEF | 95 | 98 | | % | RL = 5k | 3 |
| Voltage Conversion Efficiency | VOUT EF | 97 | 99.9 | | % | RL = (as printed) | 3 |
| Supply Voltage | | | | 10.5 | V | ICL7660 | 3 |
| LV and OSC Input Voltage | | -0.3 | | | V | for V+ < 5.5V; upper limit (V+ + 0.3V); see Note 2 | 3 |
| Current into LV | | | | 20 | µA | for V+ > 3.5V (Note 2) | 3 |
| Operating Temperature Range (ICL7660C) | | 0 | | 70 | °C | ICL7660C | 3 |
| Maximum Storage Temperature Range | | -65 | | 150 | °C | | 3 |
| Maximum Lead Temperature (Soldering) | | | | 300 | °C | 10s, SOIC lead tips only | 3 |
| Oscillator Frequency | fOSC | | 10 | | kHz | | 3 |
| Oscillator Impedance | ZOSC | | 1 | | MΩ | V+ = 2V | 3 |
| Oscillator Impedance | ZOSC | | 100 | | kΩ | V = 5V | 3 |
| Thermal Resistance, junction to ambient (SOIC) | θJA | | 160 | | °C/W | SOIC package, typical, measured in free air on evaluation PC board (Note 1) | 3 |
## CAD (KiCad official)
- Symbol: `ICL7660CBAZ-T`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `icl7660cbaz-t-etched.step` / `icl7660cbaz-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `icl7660cbaz-t.step` / `icl7660cbaz-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Intersil(Renesas Electronics) datasheet](docs/icl7660cbaz-t-datasheet.pdf) (11 pp, sha256 `e3855fbeaa02c7db`, retrieved 2026-10-27, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `off` (skipped (clean text read)), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/icl7660cbaz-t-datasheet.pdf)