ICL7650SCPA-1Z

{
  "slug": "icl7650scpa-1z",
  "version": "0.1.0",
  "type": "component",
  "description": "RENESAS Precision OpAmps, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers",
    "icl7650scpa-1z",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "icl7650scpa-1z.kicad_sym",
    "icl7650scpa-1z.kicad_mod",
    "icl7650scpa-1z.glb",
    "icl7650scpa-1z.step",
    "icl7650scpa-1z.lbr",
    "docs/hero.png",
    "docs/icl7650scpa-1z-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "icl7650scpa-1z-hero.glb",
    "icl7650scpa-1z-hero.overlay.json",
    "icl7650scpa-1z-etched.glb"
  ],
  "component": {
    "mpn": "ICL7650SCPA-1Z",
    "manufacturer": "RENESAS",
    "package": "PDIP-8",
    "pin_count": 8,
    "category": "Amplifiers",
    "subcategory": "Precision OpAmps",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/b0d37905d140af33ab899b8b6782445b.pdf",
    "parts": {
      "symbol": "icl7650scpa-1z.kicad_sym",
      "footprint": "icl7650scpa-1z.kicad_mod",
      "model_3d": "icl7650scpa-1z-hero.glb",
      "model_3d_plain": "icl7650scpa-1z-etched.glb",
      "model_3d_step": "icl7650scpa-1z-etched.step",
      "model_3d_step_plain": "icl7650scpa-1z.step",
      "lbr": "icl7650scpa-1z.lbr"
    },
    "distributor_links": {
      "lcsc": "C706801",
      "digikey": "ICL7650SCPA-1Z-ND",
      "mouser": "968-ICL7650SCPA-1Z"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T21:27:27Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "ICL7650SCPA-1Z-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "968-ICL7650SCPA-1Z",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CEXTA",
        "type": "passive",
        "description": "Null/storage capacitor connection A; a 0.1 µF low-dielectric-absorption capacitor (mylar or polypropylene preferred) connects here with its return at CRETN."
      },
      {
        "number": "2",
        "name": "-IN",
        "type": "input",
        "description": "Inverting input; the input voltage must stay within the absolute maximum range of (V+ + 0.3 V) to (V- - 0.3 V), and drive current should be limited to under 1 mA to avoid latchup."
      },
      {
        "number": "3",
        "name": "+IN",
        "type": "input",
        "description": "Non-inverting input; the common mode voltage range is -5 V to +3.5 V over 0 to +70 °C, and the same input voltage and latchup limits apply."
      },
      {
        "number": "4",
        "name": "V-",
        "type": "power_in",
        "description": "Negative supply rail; the operating supply range V+ to V- is 4.5 V to 16 V, and the amplifier supplies should be established at the same time as or before any input signal is applied."
      },
      {
        "number": "5",
        "name": "CRETN",
        "type": "passive",
        "description": "Common return for the two null capacitors; the CEXTA/CEXTB common connection should be made directly by a separate wire or trace, and any outside foil should be connected to CRETN."
      },
      {
        "number": "6",
        "name": "OUTPUT",
        "type": "output",
        "description": "Amplifier output with a typical output impedance of about 18k; it guarantees at least 2.3 mA source and 20 mA sink current over 0 to +70 °C, and a short-circuit duration of indefinite is permitted."
      },
      {
        "number": "7",
        "name": "V+",
        "type": "power_in",
        "description": "Positive supply rail; the operating supply range V+ to V- is 4.5 V to 16 V, and the absolute maximum supply voltage (V+ to V-) is 18 V."
      },
      {
        "number": "8",
        "name": "CEXTB",
        "type": "passive",
        "description": "Null/storage capacitor connection B; a 0.1 µF low-dielectric-absorption capacitor connects here, paired with CEXTA and returned to CRETN."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The 8-lead pin layout is only available as a text-extracted diagram on page 2 (no graphic). Pin-to-f; The micro symbol was lost in text extraction, so the capacitor values read as '0.1F' in the source. ; The schema has no specs field, so headline specs (supply 4.5 V to 16 V, supply current 2 mA typ / 3 "
        ],
        "pages_sent": 13,
        "cost_usd": 0.0799,
        "at": "2026-10-30T21:27:18"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/b0d37905d140af33ab899b8b6782445b.pdf",
        "pages": 13,
        "sha256": "57aabfe879e10d55",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "icl7650scpa-1z.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "icl7650scpa-1z-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b083b3ba0e8eebbcaee96c03650cd56027008f31c9f38beb15be2f53f0650245",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}