main
Ray
Publish 0.1.0
33eaa2f
ICL3232ECBZ-T
RENESAS · Pre-ordered Chips · SOIC-16-300mil
ICL3232ECBZ-T from RENESAS, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | External capacitor (voltage doubler) is connected to this lead; four 0.1µF capacitors are required at VCC = 3.3V. |
| 2 | V+ | power_out | Internally generated positive transmitter supply (+5.5V nominal), which must not be loaded externally beyond the charge-pump limits. |
| 3 | C1- | passive | External capacitor (voltage doubler) is connected to this lead. |
| 4 | C2+ | passive | External capacitor (voltage inverter) is connected to this lead. |
| 5 | C2- | passive | External capacitor (voltage inverter) is connected to this lead. |
| 6 | V- | power_out | Internally generated negative transmitter supply (-5.5V nominal). |
| 7 | T2OUT | output | ±15kV ESD protected, RS-232 level (nominally ±5.5V) transmitter output. |
| 8 | R2IN | input | ±15kV ESD protected, RS-232 compatible receiver input (accepts up to ±25V). |
| 9 | R2OUT | output | TTL/CMOS level receiver output. |
| 10 | T2IN | input | TTL/CMOS compatible transmitter input; floating inputs can increase ICC, so unused inputs should be connected to GND. |
| 11 | T1IN | input | TTL/CMOS compatible transmitter input; floating inputs can increase ICC, so unused inputs should be connected to GND. |
| 12 | R1OUT | output | TTL/CMOS level receiver output. |
| 13 | R1IN | input | ±15kV ESD protected, RS-232 compatible receiver input (accepts up to ±25V). |
| 14 | T1OUT | output | ±15kV ESD protected, RS-232 level (nominally ±5.5V) transmitter output. |
| 15 | GND | power_in | Ground connection. |
| 16 | VCC | power_in | System power supply input (3.0V to 5.5V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-16-300mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VCC) | VCC | 3.3 | 5 | V | 12 | ||
| Rx Input Voltage | -15 | 15 | V | 12 | |||
| Temperature Range, ICL32xxECX (commercial, 0 to +70 C) | 0 | 70 | °C | 12 | |||
| VCC to GND | VCC | -0.3 | 6 | V | 11 | ||
| V+ to GND | V+ | -0.3 | 7 | V | 11 | ||
| V- to GND (as printed in Minimum/Maximum columns) | V- | 0.3 | -7 | V | 11 | ||
| V+ to V- | V+-V- | 14 | V | 11 | |||
| Input Voltage TIN | TIN | -0.3 | 6 | V | 11 | ||
| Input Voltage RIN | RIN | -28 | 28 | V | 11 | ||
| Output Voltage TOUT | TOUT | -13.2 | 13.2 | V | 11 | ||
| Output Voltage ROUT | ROUT | -0.3 | V | 11 | |||
| Maximum Junction Temperature (Plastic Package) | TJ | 150 | °C | 11 | |||
| Maximum Storage Temperature Range | TSTG | -65 | 150 | °C | 11 | ||
| Thermal Resistance, 16 Ld Wide SOIC Package (typical) | θJA | 100 | °C/W | Note 4: low-effective thermal conductivity test board, free air | 11 | ||
| Input Logic Threshold Low | VIL | 0.8 | V | Full temp range; TIN, FORCEON, FORCEOFF, EN, SHDN | 12 | ||
| Input Logic Threshold High, VCC = 3.3V | VIH | 2 | V | VCC = 3.3V; Full temp range; TIN, FORCEON, FORCEOFF, EN, SHDN | 12 | ||
| Input Logic Threshold High, VCC = 5.0V | VIH | 2.4 | V | VCC = 5.0V; Full temp range; TIN, FORCEON, FORCEOFF, EN, SHDN | 12 | ||
| Input Leakage Current (not ICL3232EF) | IIN | -1 | 0.01 | 1 | µA | Full temp range; TIN, FORCEON, FORCEOFF, EN, SHDN | 12 |
| Output Voltage Low | VOL | 0.4 | V | IOUT = 1.6mA; Full temp range | 12 | ||
| Supply Current, Automatic Power-Down Disabled (ICL3232 at VCC = 3.15V) | 0.3 | 1 | mA | All outputs unloaded; FORCEON = FORCEOFF = SHDN = VCC; VCC = 3.15V; 25°C | 12 | ||
| Input Threshold Low, VCC = 3.3V | VIL | 0.6 | 1.2 | V | VCC = 3.3V; 25°C | 12 | |
| Input Threshold Low, VCC = 5.0V | VIL | 0.8 | 1.5 | V | VCC = 5.0V; 25°C | 12 | |
| Input Threshold High, VCC = 3.3V | VIH | 1.5 | 2.4 | V | VCC = 3.3V; 25°C | 13 | |
| Input Threshold High, VCC = 5.0V | VIH | 1.8 | 2.4 | V | VCC = 5.0V; 25°C | 13 | |
| Input Hysteresis | VHYS | 0.5 | V | 25°C | 13 | ||
| Input Resistance | RIN | 3 | 5 | 7 | kΩ | 25°C | 13 |
| Receiver Input Voltage Range | VRIN | -25 | 25 | V | 25°C | 13 | |
| Output Voltage Swing | VOUT | -5 | 5.4 | V | All TOUT loaded with 3kΩ to ground; Full temp range | 13 | |
| Output Resistance | ROUT | 300 | Ω | VCC = V+ = V- = 0V; TOUT = ±2V; Full temp range | 13 | ||
| Output Short-Circuit Current | IOS | -60 | 35 | 60 | mA | Full temp range | 13 |
| Output Leakage Current | IOLK | -25 | 25 | µA | VOUT = ±12V; VCC = 0V or 3V to 5.5V; Automatic Power-Down or FORCEOFF = SHDN = GND; Full temp range | 13 | |
| Maximum Data Rate | 250 | 500 | kbps | RL = 3kΩ, CL = 1000pF, one transmitter switching; Full temp range | 13 | ||
| Transition Region Slew Rate (CL = 150pF to 2500pF) | 4 | 30 | V/µs | VCC = 3.3V; RL = 3kΩ to 7kΩ; measured from 3V to -3V or -3V to 3V; 25°C | 13 | ||
| Transition Region Slew Rate (CL = 150pF to 1000pF) | 6 | 30 | V/µs | VCC = 3.3V; RL = 3kΩ to 7kΩ; measured from 3V to -3V or -3V to 3V; 25°C | 13 | ||
| Receiver Propagation Delay tPHL | tPHL | 0.15 | µs | Receiver input to receiver output, CL = 150pF; 25°C | 13 | ||
| Receiver Propagation Delay tPLH | tPLH | 0.15 | µs | Receiver input to receiver output, CL = 150pF; 25°C | 13 | ||
| Transmitter Skew | 100 | ns | tPHL to tPLH (Note 5); 25°C | 13 | |||
| Receiver Skew | 50 | ns | tPHL to tPLH; 25°C | 13 | |||
| ESD RS-232 Pins (TOUT, RIN) Human Body Model | 15 | kV | 25°C | 13 | |||
| ESD RS-232 Pins IEC61000-4-2 Contact Discharge | 8 | kV | 25°C | 13 | |||
| ESD RS-232 Pins IEC61000-4-2 Air Gap Discharge | 15 | kV | 25°C | 13 | |||
| ESD All Other Pins Human Body Model | 2 | kV | 25°C | 13 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | C2- External capacitor (voltage inverter) is connected to this lead TIN TTL/CMOS compatible transmitter inputs | 10 |
CAD (KiCad official)
- Symbol:
ICL3232ECBZ-T - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
icl3232ecbz-t-etched.step/icl3232ecbz-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);icl3232ecbz-t.step/icl3232ecbz-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (39 pp, sha256
d263fc23b7ec8030, retrieved 2026-11-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ICL3232ECBZ-T
**RENESAS** · Pre-ordered Chips · SOIC-16-300mil
ICL3232ECBZ-T from RENESAS, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | External capacitor (voltage doubler) is connected to this lead; four 0.1µF capacitors are required at VCC = 3.3V. |
| 2 | V+ | power_out | Internally generated positive transmitter supply (+5.5V nominal), which must not be loaded externally beyond the charge-pump limits. |
| 3 | C1- | passive | External capacitor (voltage doubler) is connected to this lead. |
| 4 | C2+ | passive | External capacitor (voltage inverter) is connected to this lead. |
| 5 | C2- | passive | External capacitor (voltage inverter) is connected to this lead. |
| 6 | V- | power_out | Internally generated negative transmitter supply (-5.5V nominal). |
| 7 | T2OUT | output | ±15kV ESD protected, RS-232 level (nominally ±5.5V) transmitter output. |
| 8 | R2IN | input | ±15kV ESD protected, RS-232 compatible receiver input (accepts up to ±25V). |
| 9 | R2OUT | output | TTL/CMOS level receiver output. |
| 10 | T2IN | input | TTL/CMOS compatible transmitter input; floating inputs can increase ICC, so unused inputs should be connected to GND. |
| 11 | T1IN | input | TTL/CMOS compatible transmitter input; floating inputs can increase ICC, so unused inputs should be connected to GND. |
| 12 | R1OUT | output | TTL/CMOS level receiver output. |
| 13 | R1IN | input | ±15kV ESD protected, RS-232 compatible receiver input (accepts up to ±25V). |
| 14 | T1OUT | output | ±15kV ESD protected, RS-232 level (nominally ±5.5V) transmitter output. |
| 15 | GND | power_in | Ground connection. |
| 16 | VCC | power_in | System power supply input (3.0V to 5.5V). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SOIC-16-300mil |
| Category | Interface ICs |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VCC) | VCC | 3.3 | | 5 | V | | 12 |
| Rx Input Voltage | | -15 | | 15 | V | | 12 |
| Temperature Range, ICL32xxECX (commercial, 0 to +70 C) | | 0 | | 70 | °C | | 12 |
| VCC to GND | VCC | -0.3 | | 6 | V | | 11 |
| V+ to GND | V+ | -0.3 | | 7 | V | | 11 |
| V- to GND (as printed in Minimum/Maximum columns) | V- | 0.3 | | -7 | V | | 11 |
| V+ to V- | V+-V- | | | 14 | V | | 11 |
| Input Voltage TIN | TIN | -0.3 | | 6 | V | | 11 |
| Input Voltage RIN | RIN | -28 | | 28 | V | | 11 |
| Output Voltage TOUT | TOUT | -13.2 | | 13.2 | V | | 11 |
| Output Voltage ROUT | ROUT | -0.3 | | | V | | 11 |
| Maximum Junction Temperature (Plastic Package) | TJ | | | 150 | °C | | 11 |
| Maximum Storage Temperature Range | TSTG | -65 | | 150 | °C | | 11 |
| Thermal Resistance, 16 Ld Wide SOIC Package (typical) | θJA | | 100 | | °C/W | Note 4: low-effective thermal conductivity test board, free air | 11 |
| Input Logic Threshold Low | VIL | | | 0.8 | V | Full temp range; TIN, FORCEON, FORCEOFF, EN, SHDN | 12 |
| Input Logic Threshold High, VCC = 3.3V | VIH | 2 | | | V | VCC = 3.3V; Full temp range; TIN, FORCEON, FORCEOFF, EN, SHDN | 12 |
| Input Logic Threshold High, VCC = 5.0V | VIH | 2.4 | | | V | VCC = 5.0V; Full temp range; TIN, FORCEON, FORCEOFF, EN, SHDN | 12 |
| Input Leakage Current (not ICL3232EF) | IIN | -1 | 0.01 | 1 | µA | Full temp range; TIN, FORCEON, FORCEOFF, EN, SHDN | 12 |
| Output Voltage Low | VOL | | | 0.4 | V | IOUT = 1.6mA; Full temp range | 12 |
| Supply Current, Automatic Power-Down Disabled (ICL3232 at VCC = 3.15V) | | | 0.3 | 1 | mA | All outputs unloaded; FORCEON = FORCEOFF = SHDN = VCC; VCC = 3.15V; 25°C | 12 |
| Input Threshold Low, VCC = 3.3V | VIL | 0.6 | 1.2 | | V | VCC = 3.3V; 25°C | 12 |
| Input Threshold Low, VCC = 5.0V | VIL | 0.8 | 1.5 | | V | VCC = 5.0V; 25°C | 12 |
| Input Threshold High, VCC = 3.3V | VIH | | 1.5 | 2.4 | V | VCC = 3.3V; 25°C | 13 |
| Input Threshold High, VCC = 5.0V | VIH | | 1.8 | 2.4 | V | VCC = 5.0V; 25°C | 13 |
| Input Hysteresis | VHYS | | 0.5 | | V | 25°C | 13 |
| Input Resistance | RIN | 3 | 5 | 7 | kΩ | 25°C | 13 |
| Receiver Input Voltage Range | VRIN | -25 | | 25 | V | 25°C | 13 |
| Output Voltage Swing | VOUT | -5 | 5.4 | | V | All TOUT loaded with 3kΩ to ground; Full temp range | 13 |
| Output Resistance | ROUT | 300 | | | Ω | VCC = V+ = V- = 0V; TOUT = ±2V; Full temp range | 13 |
| Output Short-Circuit Current | IOS | -60 | 35 | 60 | mA | Full temp range | 13 |
| Output Leakage Current | IOLK | -25 | | 25 | µA | VOUT = ±12V; VCC = 0V or 3V to 5.5V; Automatic Power-Down or FORCEOFF = SHDN = GND; Full temp range | 13 |
| Maximum Data Rate | | 250 | 500 | | kbps | RL = 3kΩ, CL = 1000pF, one transmitter switching; Full temp range | 13 |
| Transition Region Slew Rate (CL = 150pF to 2500pF) | | 4 | | 30 | V/µs | VCC = 3.3V; RL = 3kΩ to 7kΩ; measured from 3V to -3V or -3V to 3V; 25°C | 13 |
| Transition Region Slew Rate (CL = 150pF to 1000pF) | | 6 | | 30 | V/µs | VCC = 3.3V; RL = 3kΩ to 7kΩ; measured from 3V to -3V or -3V to 3V; 25°C | 13 |
| Receiver Propagation Delay tPHL | tPHL | | 0.15 | | µs | Receiver input to receiver output, CL = 150pF; 25°C | 13 |
| Receiver Propagation Delay tPLH | tPLH | | 0.15 | | µs | Receiver input to receiver output, CL = 150pF; 25°C | 13 |
| Transmitter Skew | | | 100 | | ns | tPHL to tPLH (Note 5); 25°C | 13 |
| Receiver Skew | | | 50 | | ns | tPHL to tPLH; 25°C | 13 |
| ESD RS-232 Pins (TOUT, RIN) Human Body Model | | | 15 | | kV | 25°C | 13 |
| ESD RS-232 Pins IEC61000-4-2 Contact Discharge | | | 8 | | kV | 25°C | 13 |
| ESD RS-232 Pins IEC61000-4-2 Air Gap Discharge | | | 15 | | kV | 25°C | 13 |
| ESD All Other Pins Human Body Model | | | 2 | | kV | 25°C | 13 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | C2- External capacitor (voltage inverter) is connected to this lead TIN TTL/CMOS compatible transmitter inputs | 10 |
## CAD (KiCad official)
- Symbol: `ICL3232ECBZ-T`
- Footprint: `Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `icl3232ecbz-t-etched.step` / `icl3232ecbz-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `icl3232ecbz-t.step` / `icl3232ecbz-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [RENESAS datasheet](docs/icl3232ecbz-t-datasheet.pdf) (39 pp, sha256 `d263fc23b7ec8030`, retrieved 2026-11-11, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/icl3232ecbz-t-datasheet.pdf)