Generated by kicad-footprint-generator · KiCad file format 20260206
ICL3221CAZ-T
RENESAS · RS232 ICs · SSOP-16
ICL3221CAZ-T from RENESAS, in a SSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Active low receiver enable control; driving it high places the inverting receiver outputs in high impedance. |
| 2 | C1+ | passive | External capacitor (voltage doubler) is connected to this lead. |
| 3 | V+ | power_out | Internally generated positive transmitter supply (+5.5V). |
| 4 | C1- | passive | External capacitor (voltage doubler) is connected to this lead. |
| 5 | C2+ | passive | External capacitor (voltage inverter) is connected to this lead. |
| 6 | C2- | passive | External capacitor (voltage inverter) is connected to this lead. |
| 7 | V- | power_out | Internally generated negative transmitter supply (-5.5V). |
| 8 | R1IN | input | RS-232 compatible receiver input, accepting ±25V with 3kΩ to 7kΩ input resistance. |
| 9 | R1OUT | output | TTL/CMOS level receiver output. |
| 10 | INVALID | output | Active low output that indicates if no valid RS-232 levels are present on any receiver input. |
| 11 | T1IN | input | TTL/CMOS compatible transmitter input. |
| 12 | FORCEON | input | Active high input to override automatic powerdown circuitry thereby keeping transmitters active (FORCEOFF must be high). |
| 13 | T1OUT | output | RS-232 level (nominally ±5.5V) transmitter output. |
| 14 | GND | power_in | Ground connection. |
| 15 | VCC | power_in | System power supply input (3.0V to 5.5V). |
| 16 | FORCEOFF | input | Active low to shut down transmitters and on-chip power supply, overriding automatic circuitry and FORCEON. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | RENESAS |
| Package | SSOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC to Ground | VCC | -0.3 | 6 | V | 9 | ||
| V+ to Ground | V+ | -0.3 | 7 | V | 9 | ||
| V- to Ground | V- | 0.3 | -7 | V | printed as +0.3 / -7 | 9 | |
| V+ to V- | 14 | V | 9 | ||||
| Input Voltages TIN, FORCEOFF, FORCEON, EN, SHDN | -0.3 | 6 | V | 9 | |||
| Input Voltage RIN | RIN | -25 | 25 | V | 9 | ||
| Output Voltage TOUT | TOUT | -13.2 | 13.2 | V | 9 | ||
| Maximum Junction Temperature (Plastic Package) | 150 | °C | 9 | ||||
| Storage Temperature Range | -65 | 150 | °C | 9 | |||
| Thermal Resistance 16 Ld SSOP | θJA | 135 | °C/W | Typical, low-effective thermal conductivity test board, free air | 9 | ||
| Temperature Range ICL32xxCx | 0 | 70 | °C | 10 | |||
| Supply Current, Automatic Power-Down | 1 | 10 | µA | All RIN open, FORCEON = GND, FORCEOFF = VCC; 25°C | 10 | ||
| Supply Current, Powerdown | 1 | 10 | µA | FORCEOFF = SHDN = GND; 25°C | 10 | ||
| Supply Current, Automatic Power-Down Disabled | 0.3 | 1 | mA | All outputs unloaded, FORCEON = FORCEOFF = SHDN = VCC, VCC = 3.15V, ICL3221-32; 25°C | 10 | ||
| Input Logic Threshold Low | 0.8 | V | TIN, FORCEON, FORCEOFF, EN, SHDN; Full temp | 10 | |||
| Input Logic Threshold High (VCC = 3.3V) | 2 | V | TIN, FORCEON, FORCEOFF, EN, SHDN; VCC = 3.3V; Full temp | 10 | |||
| Input Logic Threshold High (VCC = 5.0V) | 2.4 | V | TIN, FORCEON, FORCEOFF, EN, SHDN; VCC = 5.0V; Full temp | 10 | |||
| Input Leakage Current | -1 | 0.01 | 1 | µA | TIN, FORCEON, FORCEOFF, EN, SHDN; Full temp; printed ±0.01 typ, ±1.0 max | 10 | |
| Output Leakage Current (receiver outputs) | -10 | 0.05 | 10 | µA | FORCEOFF = GND or EN = VCC; Full temp; printed ±0.05 typ, ±10 max | 10 | |
| Output Voltage Low | 0.4 | V | IOUT = 1.6mA; Full temp | 10 | |||
| Receiver Input Thresholds to Enable Transmitters | -2.7 | 2.7 | V | ICL32xx powers up (See Figure 12); Full temp | 10 | ||
| Receiver Input Thresholds to Disable Transmitters | -0.3 | 0.3 | V | ICL32xx powers down (See Figure 12); Full temp | 10 | ||
| INVALID Output Voltage Low | 0.4 | V | IOUT = 1.6mA; Full temp | 10 | |||
| Receiver Input Voltage Range | -25 | 25 | V | Full temp | 10 | ||
| Receiver Input Threshold Low (VCC = 3.3V) | 0.6 | 1.2 | V | VCC = 3.3V; 25°C | 10 | ||
| Receiver Input Threshold Low (VCC = 5.0V) | 0.8 | 1.5 | V | VCC = 5.0V; 25°C | 10 | ||
| Receiver Input Threshold High (VCC = 3.3V) | 1.5 | 2.4 | V | VCC = 3.3V; 25°C | 10 | ||
| Receiver Input Threshold High (VCC = 5.0V) | 1.8 | 2.4 | V | VCC = 5.0V; 25°C | 10 | ||
| Receiver Input Hysteresis | 0.3 | V | 25°C | 10 | |||
| Receiver Threshold to Transmitters Enabled Delay | tWU | 100 | µs | 25°C | 10 | ||
| Receiver Positive or Negative Threshold to INVALID High Delay | tINVH | 1 | µs | 25°C | 10 | ||
| Receiver Positive or Negative Threshold to INVALID Low Delay | tINVL | 30 | µs | 25°C | 10 | ||
| Receiver Input Resistance | 3 | 5 | 7 | kΩ | 25°C | 11 | |
| Transmitter Output Voltage Swing | 5 | 5.4 | V | All Transmitter Outputs Loaded with 3kΩ to Ground; Full temp; printed ±5.0 min, ±5.4 typ | 11 | ||
| Transmitter Output Resistance | 300 | W | VCC = V+ = V- = 0V, Transmitter Output = ±2V; Full temp; typ printed 10M | 11 | |||
| Transmitter Output Short-Circuit Current | -60 | 35 | 60 | mA | Full temp; printed ±35 typ, ±60 max | 11 | |
| Transmitter Output Leakage Current | -25 | 25 | µA | VOUT = ±12V, VCC = 0V or 3V to 5.5V, Automatic Powerdown or FORCEOFF = SHDN = GND; Full temp | 11 | ||
| Maximum Data Rate | 250 | 500 | kbps | RL = 3kΩ, CL = 1000pF, one transmitter switching; Full temp | 11 | ||
| Receiver Propagation Delay tPHL | tPHL | 0.3 | µs | Receiver input to receiver output, CL = 150pF; 25°C | 11 | ||
| Receiver Propagation Delay tPLH | tPLH | 0.3 | µs | Receiver input to receiver output, CL = 150pF; 25°C | 11 | ||
| Receiver Output Enable Time | 200 | ns | Normal operation; 25°C | 11 | |||
| Receiver Output Disable Time | 200 | ns | Normal operation; 25°C | 11 | |||
| Transmitter Skew | 200 | 1000 | ns | tPHL - tPLH; Full temp; max printed as '100 0' | 11 | ||
| Receiver Skew | 100 | 500 | ns | tPHL - tPLH; Full temp | 11 | ||
| Transition Region Slew Rate (CL = 200pF to 2500pF) | 4 | 8 | 30 | V/µs | VCC = 3.3V, RL = 3kΩ to 7kΩ, measured from 3V to -3V or -3V to 3V, CL = 200pF to 2500pF; 25°C | 11 | |
| Transition Region Slew Rate (CL = 200pF to 1000pF) | 6 | 30 | V/µs | VCC = 3.3V, RL = 3kΩ to 7kΩ, measured from 3V to -3V or -3V to 3V, CL = 200pF to 1000pF; 25°C | 11 | ||
| ESD HBM, RS-232 Pins (TOUT, RIN) | 15 | kV | Human Body Model, ICL3221 - ICL3243; 25°C; printed ±15 | 11 | |||
| ESD IEC61000-4-2 Contact, RS-232 Pins | 8 | kV | ICL3221 - ICL3243; 25°C; printed ±8 | 11 | |||
| ESD IEC61000-4-2 Air Gap, RS-232 Pins | 8 | kV | ICL3221 - ICL3232; 25°C; printed ±8 | 11 | |||
| ESD HBM, All Other Pins | 2 | kV | Human Body Model, ICL3221 - ICL3243; 25°C; printed ±2 | 11 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | C2- External capacitor (voltage inverter) is connected to this lead. TIN TTL/CMOS compatible transmitter Inputs. | 8 |
CAD (KiCad official)
- Symbol:
ICL3221CAZ-T - Footprint:
Package_SO:SSOP-16_5.3x6.2mm_P0.65mm - 3D model: SSOP-16 (KiCad packages3D, STEP)
- 3D model files:
icl3221caz-t-etched.step/icl3221caz-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);icl3221caz-t.step/icl3221caz-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: RENESAS datasheet (36 pp, sha256
b2a9e9447525ad5b, retrieved 2026-11-13, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).