component
ICE3PCS01G
Public Made by Adomby adom
Infineon AC-DC Controllers and Regulators, SOIC-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+152−8@@ -1,13 +1,162 @@ {+ "schema_version": 1,+ "type": "component", "slug": "ice3pcs01g",+ "title": "ICE3PCS01G",+ "brief": "Infineon AC-DC Controllers and Regulators, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Infineon AC-DC Controllers and Regulators, SOIC-14. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "ice3pcs01g" ],+ "component": {+ "mpn": "ICE3PCS01G",+ "manufacturer": "Infineon",+ "package": "SOIC-14",+ "pin_count": 14,+ "category": "PMIC",+ "subcategory": "AC-DC Controllers and Regulators",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/ba3d4eca983e255d347c1fc2446d4479.pdf",+ "parts": {+ "symbol": "ice3pcs01g.kicad_sym",+ "footprint": "ice3pcs01g.kicad_mod",+ "model_3d": "ice3pcs01g.glb",+ "model_3d_step": "ice3pcs01g.step",+ "lbr": "ice3pcs01g.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "BOFO",+ "type": "output",+ "description": "Boost Follower setting. An external DC voltage on this pin indicates the PWM output power level; used to select the boost follower low step. Set with an external resistor divider (R_BOFO1..2, ~200 k\u03a9)."+ },+ {+ "number": "2",+ "name": "ISENSE",+ "type": "input",+ "description": "Current Sense Input. Senses the voltage drop across the external shunt resistor R_SHUNT for average current control loop and peak current limitation. A series resistor R_CS (~50 \u03a9) is recommended in series to limit inrush current into the pin."+ },+ {+ "number": "3",+ "name": "SGND",+ "type": "power_in",+ "description": "Signal Ground. Ground reference of the IC signal-level circuitry; kept separate from the power/gate switching ground (PGND)."+ },+ {+ "number": "4",+ "name": "ICOMP",+ "type": "output",+ "description": "Current Loop Compensation. Low-pass filter/compensation node for the current control loop; external capacitor C_ICOMP (~4.7 nF/25 V) to SGND integrates the OTA6 output and averages the current sense signal. Internally shorted to 5 V in standby."+ },+ {+ "number": "5",+ "name": "FREQ",+ "type": "input",+ "description": "Switching Frequency Setting. Set the operating frequency (21 kHz to 100 kHz) via a resistor R_FREQ to SGND (e.g. 67 k\u03a9 \u2192 ~65 kHz). Also serves as the external synchronization input when driven by an external pulse >2.5 V."+ },+ {+ "number": "6",+ "name": "VB_OK",+ "type": "output",+ "description": "Bulk Voltage OK signal. Internally pulled up to 5 V once the bulk voltage exceeds 95% of the rated level; pulled to ground when VSENSE falls below the VBTHL_EN threshold. Can be used to enable the downstream PWM IC or an inrush relay."+ },+ {+ "number": "7",+ "name": "VBTHL_EN",+ "type": "input",+ "description": "PFC Enable Function / VB_OK turn-off threshold. An external reference sets the VB_OK signal turn-off threshold. Pulling this pin below 0.5 V shuts down the IC."+ },+ {+ "number": "8",+ "name": "VREF",+ "type": "power_out",+ "description": "Voltage Reference. 5 V internal regulator output with minimum 5 mA sourcing capability; bypass with ~100 nF/25 V to SGND."+ },+ {+ "number": "9",+ "name": "BOP",+ "type": "input",+ "description": "Brownout Protection. Monitors the AC input voltage for brownout protection and line-range selection via an external RC divider from the rectified AC (BOP threshold >1.25 V for start-up)."+ },+ {+ "number": "10",+ "name": "OVP",+ "type": "input",+ "description": "Over Voltage Protection. Additional resistive divider from bulk voltage to SGND sets the secondary over-voltage protection threshold to ensure safe system operation."+ },+ {+ "number": "11",+ "name": "VSENSE",+ "type": "input",+ "description": "Bulk Voltage Sense. Connected via a resistive divider to the boost output bulk voltage; feeds the sigma-delta ADC (2.5 V internal reference, 3.55 kHz sampling) used for voltage regulation, over-voltage and open-loop protection."+ },+ {+ "number": "12",+ "name": "VCC",+ "type": "power_in",+ "description": "IC Supply Voltage. Main supply for the IC section, up to 25 V. UVLO turn-on at 12.0 V (with VSENSE >0.5 V and BOP >1.25 V); turn-off below 11 V. Typical operating current 6.7 mA, standby ~1.4 mA."+ },+ {+ "number": "13",+ "name": "GATE",+ "type": "output",+ "description": "Gate Drive Output for the external PFC boost MOSFET. Gate drive voltage is clamped at 15 V (typical); series resistor R_GATE ~3.3 \u03a9 recommended."+ },+ {+ "number": "14",+ "name": "PGND",+ "type": "power_in",+ "description": "Power Ground / Gate Switching Ground. Return path for the gate driver current; kept separate from SGND for noise isolation."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/ba3d4eca983e255d347c1fc2446d4479.pdf",+ "pages": 22,+ "sha256": "24cecdf8968137bc",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Infineon",+ "Package": "SOIC-14",+ "Category": "PMIC",+ "Pins": "14"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "ice3pcs01g"+ ],+ "discovery_pitch": "ICE3PCS01G (Infineon) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +174,5 @@ "docs/ice3pcs01g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }