component
ICE3PCS01G
Public Made by Adomby adom
Infineon AC-DC Controllers and Regulators, SOIC-14. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -32,13 +32,13 @@ "number": "1", "name": "BOFO", "type": "output",- "description": "Boost Follower setting. An external DC voltage on this pin indicates the PWM output power level; used to select the boost follower low step. Set with an external resistor divider (R_BOFO1..2, ~200 k\u03a9)."+ "description": "Boost Follower setting. An external DC voltage on this pin indicates the PWM output power level; used to select the boost follower low step. Set with an external resistor divider (R_BOFO1..2, ~200 kΩ)." }, { "number": "2", "name": "ISENSE", "type": "input",- "description": "Current Sense Input. Senses the voltage drop across the external shunt resistor R_SHUNT for average current control loop and peak current limitation. A series resistor R_CS (~50 \u03a9) is recommended in series to limit inrush current into the pin."+ "description": "Current Sense Input. Senses the voltage drop across the external shunt resistor R_SHUNT for average current control loop and peak current limitation. A series resistor R_CS (~50 Ω) is recommended in series to limit inrush current into the pin." }, { "number": "3",@@ -56,7 +56,7 @@ "number": "5", "name": "FREQ", "type": "input",- "description": "Switching Frequency Setting. Set the operating frequency (21 kHz to 100 kHz) via a resistor R_FREQ to SGND (e.g. 67 k\u03a9 \u2192 ~65 kHz). Also serves as the external synchronization input when driven by an external pulse >2.5 V."+ "description": "Switching Frequency Setting. Set the operating frequency (21 kHz to 100 kHz) via a resistor R_FREQ to SGND (e.g. 67 kΩ → ~65 kHz). Also serves as the external synchronization input when driven by an external pulse >2.5 V." }, { "number": "6",@@ -104,7 +104,7 @@ "number": "13", "name": "GATE", "type": "output",- "description": "Gate Drive Output for the external PFC boost MOSFET. Gate drive voltage is clamped at 15 V (typical); series resistor R_GATE ~3.3 \u03a9 recommended."+ "description": "Gate Drive Output for the external PFC boost MOSFET. Gate drive voltage is clamped at 15 V (typical); series resistor R_GATE ~3.3 Ω recommended." }, { "number": "14",@@ -174,5 +174,8 @@ "docs/ice3pcs01g-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }