component
ICE3A2065ELJFKLA1
Public Made by Adomby adom
Infineon Technologies AC-DC Controllers And Regulators, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 7d ago |
| viewers | 7d ago |
| ice3a2065eljfkla1-etched.glb | 7d ago |
| ice3a2065eljfkla1-etched.step | 7d ago |
| ice3a2065eljfkla1-hero.glb | 7d ago |
| ice3a2065eljfkla1-hero.overlay.json | 7d ago |
| ice3a2065eljfkla1.glb | 7d ago |
| ice3a2065eljfkla1.kicad_mod | 7d ago |
| ice3a2065eljfkla1.kicad_sym | 7d ago |
| ice3a2065eljfkla1.lbr | 7d ago |
| ice3a2065eljfkla1.step | 7d ago |
| package.json | 7d ago |
| page.json | 7d ago |
| README.md | 7d ago |
| verification.json | 7d ago |
ICE3A2065ELJFKLA1
Infineon Technologies · AC-DC Controllers And Regulators · DIP-8
ICE3A2065ELJFKLA1 from Infineon Technologies, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SoftS | passive | Soft-start and auto-restart control pin; an external capacitor to ground sets the soft-start and the adjustable blanking window before the IC enters Auto Restart Mode. |
| 2 | FB | input | Feedback input that provides regulation information to the internal protection unit and PWM comparator, and controls Active Burst Mode at light load. |
| 3 | CS | input | Current sense input connected to the series resistor in the source of the integrated depletion CoolMOS; when it reaches the internal current limit threshold the driver output is switched off immediately. |
| 4 | Drain | passive | Connection to the drain of the integrated depletion CoolMOS, rated 650V at Tj = 110°C; pin 4 is shorted to pin 5 within the DIP-8 package. |
| 5 | Drain | passive | Connection to the drain of the integrated depletion CoolMOS, rated 650V at Tj = 110°C; pin 5 is shorted to pin 4 within the DIP-8 package. |
| 6 | n.c. | unconnected | Not connected. |
| 7 | VCC | power_in | Positive controller supply pin with an operating range between 8.5V and 21V. |
| 8 | GND | power_in | Ground of the controller. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Infineon Technologies |
| Package | DIP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Drain Source Voltage | VDS | 650 | V | Tj=110°C | 19 | ||
| Pulse drain current (ICE3x2065 group) | ID_Puls5 | 10.3 | A | tp limited by max. Tj=150°C | 19 | ||
| Avalanche energy, repetitive (ICE3x2065 group) | EAR5 | 0.4 | mJ | tAR limited by max. Tj=150°C | 20 | ||
| Avalanche current, repetitive (ICE3x2065 group) | IAR5 | 2 | A | tAR limited by max. Tj=150°C | 21 | ||
| VCC Supply Voltage | VVCC | -0.3 | 22 | V | 22 | ||
| FB Voltage | VFB | -0.3 | 6.5 | V | 22 | ||
| SoftS Voltage | VSoftS | -0.3 | 6.5 | V | 22 | ||
| CS Voltage | VCS | -0.3 | 6.5 | V | 22 | ||
| Junction Temperature (Controller & CoolMOS) | Tj | -40 | 150 | °C | Controller & CoolMOS | 22 | |
| Storage Temperature | TS | -55 | 150 | °C | 22 | ||
| ESD Capability (incl. Drain Pin) | VESD | 3 | kV | Human body model | 22 | ||
| Thermal Resistance Junction-Ambient | RthJA1 | 90 | K/W | PG-DIP-8 | 22 | ||
| VCC Supply Voltage operating range | VVCC | 8.5 | 21 | V | Operating range as stated in pin description | 9 | |
| Junction Temperature of Controller | TjCon | -25 | 130 | °C | Max value limited due to thermal shut down of controller | 23 | |
| Junction Temperature of CoolMOS | TjCoolMOS | -25 | 150 | °C | 23 | ||
| Start Up Current | IVCCstart | 160 | 220 | mA | VVCC = 14V | 23 | |
| VCC Charge Current | IVCCcharge1 | 0.55 | 1.05 | 1.6 | mA | VVCC = 0V | 23 |
| Leakage Current of Start Up Cell and CoolMOS | IStartLeak | 0.2 | 50 | mA | VVCC=16V, VDrain = 450V at Tj=100°C | 23 | |
| Supply Current with Inactive Gate | IVCCsup1 | 5.5 | 7 | mA | 23 | ||
| Supply Current in Active Burst Mode with Inactive Gate | IVCCburst1 | 1.05 | 1.25 | mA | VVCC =15V, VFB = 3.7V, VSoftS = 4.4V | 23 | |
| Supply Current in Active Burst Mode with Inactive Gate | IVCCburst2 | 0.95 | 1.15 | mA | VVCC = 9.5V, VFB = 3.7V, VSoftS = 4.4V | 23 | |
| VCC Turn-On Threshold | VVCCon | 14.2 | 15 | 15.8 | V | 23 | |
| VCC Turn-Off Threshold | VVCCoff | 8 | 8.5 | 9 | V | 23 | |
| Supply Current with Active Gate (ICE3A2065) | IVCCsup2 | 7.1 | 8.9 | mA | VSoftS = 4.4V, IFB = 0 | 24 | |
| Trimmed Reference Voltage | VREF | 6.37 | 6.5 | 6.63 | V | measured at pin FB, IFB = 0 | 25 |
| Fixed Oscillator Frequency | fOSC1 | 92 | 100 | 108 | kHz | ICE3Axx65 group | 25 |
| Fixed Oscillator Frequency | fOSC2 | 94 | 100 | 106 | kHz | Tj = 25°C, ICE3Axx65 group | 25 |
| Max. Duty Cycle | Dmax | 0.67 | 0.72 | 0.77 | 25 | ||
| Min. Duty Cycle | Dmin | 0 | VFB < 0.3V | 25 | |||
| PWM-OP Gain | AV | 3.5 | 3.7 | 3.9 | 25 | ||
| VFB Operating Range Min Level | VFBmin | 0.3 | 0.7 | V | 25 | ||
| VFB Operating Range Max level | VFBmax | 4.75 | V | CS=1V, limited by Comparator C4 (not production tested) | 25 | ||
| FB Pull-Up Resistor | RFB | 16 | 20 | 27 | kW | 25 | |
| SoftS Pull-Up Resistor | RSoftS | 39 | 50 | 62 | kW | 25 | |
| Deactivation Level for SoftS Comparator C7 by C2 | VSoftSC2 | 3.85 | 4 | 4.15 | V | VFB > 5V | 26 |
| Clamped VSoftS Voltage during Normal Operating Mode | VSoftSclmp | 4.23 | 4.4 | 4.57 | V | VFB = 4V | 26 |
| Activation Limit of Comparator C3 | VSoftSC3 | 5.2 | 5.4 | 5.6 | V | VFB > 5V | 26 |
| Over Load & Open Loop Detection Limit for Comparator C4 | VFBC4 | 4.62 | 4.8 | 4.98 | V | VSoftS > 5.6V | 26 |
| Active Burst Mode Level for Comparator C5 | VFBC5 | 1.23 | 1.3 | 1.37 | V | VSoftS > 5.6V | 26 |
| Active Burst Mode Level for Comparator C6a | VFBC6a | 3.85 | 4 | 4.15 | V | After Active Burst Mode is entered | 26 |
| Active Burst Mode Level for Comparator C6b | VFBC6b | 3.25 | 3.4 | 3.55 | V | After Active Burst Mode is entered | 26 |
| Overvoltage Detection Limit | VVCCOVP | 16.1 | 17.1 | 18.1 | V | VFB > 5V, VSoftS < 4.0V | 26 |
| Thermal Shutdown | TjSD | 130 | 140 | 150 | °C | Not production tested | 26 |
| Peak Current Limitation (incl. Propagation Delay) | Vcsth | 0.97 | 1.02 | 1.07 | V | dVsense / dt = 0.6V/ms | 26 |
| Peak Current Limitation during Active Burst Mode | VCS2 | 0.232 | 0.257 | 0.282 | V | 26 | |
| CS Input Bias Current | ICSbias | -1 | -0.2 | 0 | mA | VCS = 0V | 26 |
| Drain Source Breakdown Voltage | V(BR)DSS | 600 | V | Tj = 25°C | 27 | ||
| Drain Source Breakdown Voltage | V(BR)DSS | 650 | V | Tj = 110°C | 27 | ||
| Drain Source On-Resistance (ICE3A2065 / ICE3A2065Z / ICE3B2065) | RDSon5 | 0.92 | 1.05 | W | Tj = 25°C at ID = 2.0A | 27 | |
| Drain Source On-Resistance (ICE3A2065 / ICE3A2065Z / ICE3B2065) | RDSon5 | 1.93 | 2.22 | W | Tj=125°C at ID = 2.0A | 27 |
CAD (KiCad official)
- Symbol:
ICE3A2065ELJFKLA1 - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
ice3a2065eljfkla1-etched.step/ice3a2065eljfkla1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ice3a2065eljfkla1.step/ice3a2065eljfkla1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Infineon Technologies datasheet (32 pp, sha256
ba74ef678ace7dbd, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).