main
Ray Publish 0.1.0 9de4ecf

IAP15W4K61S4-30I-LQFP44

STC Micro · Microcontrollers (MCU/MPU/SOC) · LQFP-44(10x10)

IAP15W4K61S4-30I-LQFP44 from STC Micro, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P0.5/AD5/T3/PWMFLT_2 bidirectional P0.5 general I/O, address/data bus AD5, T3 external input and PWM fault-stop control input PWMFLT_2.
2 P0.6/AD6/T4CLKO/PWM7_2 bidirectional P0.6 general I/O, address/data bus AD6, T4 clock output and PWM channel 7 (PWM7_2); defaults to high-impedance input at power-up.
3 P0.7/AD7/T4/PWM6_2 bidirectional P0.7 general I/O, address/data bus AD7, T4 external input and PWM channel 6 alternate (PWM6_2).
4 P1.0/ADC0/CCP1/RxD2 bidirectional P1.0 general I/O, ADC input channel 0, CCP1 capture/compare/PWM and UART2 receive RxD2.
5 P1.1/ADC1/CCP0/TxD2 bidirectional P1.1 general I/O, ADC input channel 1, CCP0 capture/compare/PWM and UART2 transmit TxD2.
6 P4.7/TxD2_2 bidirectional P4.7 general I/O and alternate UART2 transmit TxD2_2; needs a 3.3K pull-up in weak-pull-up/quasi-bidirectional mode when used as UART2 TxD.
7 P1.2/ADC2/SS/ECI/CMPO bidirectional P1.2 general I/O, ADC input channel 2, SPI slave select SS, CCP/PCA external pulse input ECI and comparator output CMPO.
8 P1.3/ADC3/MOSI bidirectional P1.3 general I/O, ADC input channel 3 and SPI MOSI.
9 P1.4/ADC4/MISO bidirectional P1.4 general I/O, ADC input channel 4 and SPI MISO.
10 P1.5/ADC5/SCLK bidirectional P1.5 general I/O, ADC input channel 5 and SPI clock SCLK.
11 P1.6/ADC6/RxD_3/XTAL2/SysClkO_2/PWM6 bidirectional P1.6 general I/O, ADC input channel 6, UART1 receive RxD_3, crystal amplifier output XTAL2, system clock output SysClkO_2 and PWM6.
12 P1.7/ADC7/TxD_3/XTAL1/PWM7 bidirectional P1.7 general I/O, ADC input channel 7, UART1 transmit TxD_3, crystal/external clock input XTAL1 and PWM7.
13 P5.4/RST/SysClkO/SS_3/CMP- bidirectional P5.4 general I/O, active-high reset RST, system clock output SysClkO, SPI SS_3 and comparator negative input CMP- (set high-impedance when used as CMP-).
14 Vcc power_in Positive power supply.
15 P5.5/CMP+ bidirectional P5.5 general I/O and comparator positive input CMP+ (set high-impedance when used as CMP+).
16 Gnd power_in Power ground (negative supply).
17 P4.0/MOSI_3 bidirectional P4.0 general I/O and alternate SPI MOSI_3.
18 P3.0/RxD/INT4/T2CLKO bidirectional P3.0 general I/O, UART1 receive RxD, falling-edge-only external interrupt INT4 (power-down wake-up capable) and T2 clock output T2CLKO.
19 P3.1/TxD/T2 bidirectional P3.1 general I/O, UART1 transmit TxD and Timer/Counter 2 external input T2.
20 P3.2/INT0 bidirectional P3.2 general I/O and external interrupt INT0 (rising and falling edge, or falling only if IT0 is set; supports power-down wake-up).
21 P3.3/INT1 bidirectional P3.3 general I/O and external interrupt INT1 (rising and falling edge, or falling only if IT1 is set; supports power-down wake-up).
22 P3.4/T0/T1CLKO/ECI_2 bidirectional P3.4 general I/O, Timer 0 external input T0, T1 clock output T1CLKO and CCP/PCA pulse input ECI_2.
23 P3.5/T1/T0CLKO/CCP0_2 bidirectional P3.5 general I/O, Timer 1 external input T1, T0 clock output T0CLKO and CCP0_2.
24 P3.6/INT2/RxD_2/CCP1_2 bidirectional P3.6 general I/O, falling-edge-only external interrupt INT2 (power-down wake-up capable), UART1 receive RxD_2 and CCP1_2.
25 P3.7/INT3/TxD_2/PWM2_2 bidirectional P3.7 general I/O, falling-edge-only external interrupt INT3 (power-down wake-up capable), UART1 transmit TxD_2 and PWM2_2.
26 P4.1/MISO_3 bidirectional P4.1 general I/O and alternate SPI MISO_3.
27 P4.2/WR/PWM5_2 bidirectional P4.2 general I/O, external data memory write pulse WR and PWM5_2.
28 P4.3/SCLK_3 bidirectional P4.3 general I/O and alternate SPI clock SCLK_3.
29 P4.4/RD/PWM4_2 bidirectional P4.4 general I/O, external data memory read pulse RD and PWM4_2.
30 P2.0/A8/RSTOUT_LOW bidirectional P2.0 general I/O, address bit A8 and RSTOUT_LOW, which outputs low after power-up and during reset and can be set high or low by software.
31 P2.1/A9/SCLK_2/PWM3 bidirectional P2.1 general I/O, address bit A9, alternate SPI clock SCLK_2 and PWM3.
32 P2.2/A10/MISO_2/PWM4 bidirectional P2.2 general I/O, address bit A10, alternate SPI MISO_2 and PWM4.
33 P2.3/A11/MOSI_2/PWM5 bidirectional P2.3 general I/O, address bit A11, alternate SPI MOSI_2 and PWM5.
34 P2.4/A12/ECI_3/SS_2/PWMFLT bidirectional P2.4 general I/O, address bit A12, CCP/PCA pulse input ECI_3, alternate SPI SS_2 and PWM fault-stop input PWMFLT.
35 P2.5/A13/CCP0_3 bidirectional P2.5 general I/O, address bit A13 and CCP0_3.
36 P2.6/A14/CCP1_3 bidirectional P2.6 general I/O, address bit A14 and CCP1_3.
37 P2.7/A15/PWM2_2 bidirectional P2.7 general I/O, address bit A15 and PWM2_2.
38 P4.5/ALE/PWM3_2 bidirectional P4.5 general I/O, address latch enable ALE and PWM3_2.
39 P4.6/RxD2_2 bidirectional P4.6 general I/O and alternate UART2 receive RxD2_2.
40 P0.0/AD0/RxD3 bidirectional P0.0 general I/O, address/data bus AD0 and UART3 receive RxD3.
41 P0.1/AD1/TxD3 bidirectional P0.1 general I/O, address/data bus AD1 and UART3 transmit TxD3.
42 P0.2/AD2/RxD4 bidirectional P0.2 general I/O, address/data bus AD2 and UART4 receive RxD4.
43 P0.3/AD3/TxD4 bidirectional P0.3 general I/O, address/data bus AD3 and UART4 transmit TxD4.
44 P0.4/AD4/T3CLKO bidirectional P0.4 general I/O, address/data bus AD4 and T3 clock output T3CLKO.

Key specifications

Parameter Value
Manufacturer STC Micro
Package LQFP-44(10x10)
Category Embedded Processors & Controllers
Pins 44

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TST -55 125 ℃ 1374
Operating temperature (I) TA -40 85 ℃ 1374

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the 524

CAD (KiCad official)

  • Symbol: IAP15W4K61S4-30I-LQFP44
  • Footprint: Package_QFP:LQFP-44_10x10mm_P0.8mm
  • 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
  • 3D model files: iap15w4k61s4-30i-lqfp44-etched.step / iap15w4k61s4-30i-lqfp44-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); iap15w4k61s4-30i-lqfp44.step / iap15w4k61s4-30i-lqfp44.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STC Micro datasheet (1473 pp, sha256 7de35a79e1c06338, retrieved 2026-11-06, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF