Generated by kicad-footprint-generator · KiCad file format 20260206
IAP15L2K61S2-28I-LQFP44
STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-44(10x10)
IAP15L2K61S2-28I-LQFP44 from STC Micro, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P0.5/AD5 | bidirectional | Port 0 bit 5, usable as I/O (quasi-bidirectional/weak pull-up after reset, or push-pull, high-impedance input, open-drain) or as external bus address/data line AD5. |
| 2 | P0.6/AD6 | bidirectional | Port 0 bit 6, usable as I/O (quasi-bidirectional/weak pull-up after reset, or push-pull, high-impedance input, open-drain) or as external bus address/data line AD6. |
| 3 | P0.7/AD7 | bidirectional | Port 0 bit 7, usable as I/O (quasi-bidirectional/weak pull-up after reset, or push-pull, high-impedance input, open-drain) or as external bus address/data line AD7. |
| 4 | P1.0/ADC0/CCP1/RxD2 | bidirectional | Standard I/O PORT1[0], also ADC input channel 0, CCP1 capture/compare/PWM channel 1, and UART2 receive data RxD2. |
| 5 | P1.1/ADC1/CCP0/TxD2 | bidirectional | Standard I/O PORT1[1], also ADC input channel 1, CCP0 capture/compare/PWM channel 0, and UART2 transmit data TxD2. |
| 6 | P4.7/TxD2_2 | bidirectional | Standard I/O PORT4[7], also alternate UART2 transmit data TxD2_2; per the pin diagram a 3.3K pull-up is needed when used as UART2 TxD and it must be in weak pull-up/quasi-bidirectional mode. |
| 7 | P1.2/ADC2/SS/ECI | bidirectional | Standard I/O PORT1[2], also ADC input channel 2, SPI slave select SS, and CCP/PCA counter external pulse input ECI. |
| 8 | P1.3/ADC3/MOSI | bidirectional | Standard I/O PORT1[3], also ADC input channel 3 and SPI master-out/slave-in MOSI. |
| 9 | P1.4/ADC4/MISO | bidirectional | Standard I/O PORT1[4], also ADC input channel 4 and SPI master-in/slave-out MISO. |
| 10 | P1.5/ADC5/SCLK | bidirectional | Standard I/O PORT1[5], also ADC input channel 5 and SPI clock SCLK. |
| 11 | P1.6/ADC6/RxD_3/XTAL2 | bidirectional | Standard I/O PORT1[6], also ADC input channel 6, UART1 receive data RxD_3, and XTAL2 (output of the internal oscillator inverter, to external crystal; floatable when an external clock source is used). |
| 12 | P1.7/ADC7/TxD_3/XTAL1 | bidirectional | Standard I/O PORT1[7], also ADC input channel 7, UART1 transmit data TxD_3, and XTAL1 (oscillator inverter input, or external clock source input). |
| 13 | P5.4/RST/MCLKO/SS_3 | bidirectional | Standard I/O PORT5[4], also active-high reset pin RST, main clock output MCLKO (MCLK/1, /2 or /4, internal R/C clock only on this version), and SPI slave select SS_3. |
| 14 | Vcc | power_in | Positive power supply pin. |
| 15 | P5.5 | bidirectional | Standard I/O PORT5[5]. |
| 16 | Gnd | power_in | Negative power supply pin, ground. |
| 17 | P4.0/MOSI_3 | bidirectional | Standard I/O PORT4[0], also alternate SPI master-out/slave-in MOSI_3 (per pin diagram and SPI switching table). |
| 18 | P3.0/RxD/INT4/T2CLKO | bidirectional | Standard I/O PORT3[0], also UART1 receive data RxD, external interrupt 4 INT4 (falling edge only, supports power-down wake-up), and Timer 2 clock output T2CLKO. |
| 19 | P3.1/TxD/T2 | bidirectional | Standard I/O PORT3[1], also UART1 transmit data TxD and Timer/Counter 2 external input T2. |
| 20 | P3.2/INT0 | bidirectional | Standard I/O PORT3[2], also external interrupt 0 INT0 (rising and falling edge, or falling edge only if IT0=1; supports power-down wake-up). |
| 21 | P3.3/INT1 | bidirectional | Standard I/O PORT3[3], also external interrupt 1 INT1 (rising and falling edge, or falling edge only if IT1=1; supports power-down wake-up). |
| 22 | P3.4/T0/T1CLKO/ECI_2 | bidirectional | Standard I/O PORT3[4], also Timer/Counter 0 external input T0, Timer 1 clock output T1CLKO, and CCP/PCA counter pulse input ECI_2. |
| 23 | P3.5/T1/T0CLKO/CCP0_2 | bidirectional | Standard I/O PORT3[5], also Timer/Counter 1 external input T1, Timer 0 clock output T0CLKO, and CCP0_2 capture/compare/PWM channel 0. |
| 24 | P3.6/INT2/RxD_2/CCP1_2 | bidirectional | Standard I/O PORT3[6], also external interrupt 2 INT2 (falling edge only, supports power-down wake-up), UART1 receive data RxD_2, and CCP1_2 channel 1. |
| 25 | P3.7/INT3/TxD_2/CCP2/CCP2_2 | bidirectional | Standard I/O PORT3[7], also external interrupt 3 INT3 (falling edge only, supports power-down wake-up), UART1 transmit data TxD_2, and CCP2/CCP2_2 channel 2. |
| 26 | P4.1/MISO_3 | bidirectional | Standard I/O PORT4[1], also alternate SPI master-in/slave-out MISO_3 (per pin diagram and SPI switching table). |
| 27 | P4.2/WR | bidirectional | Standard I/O PORT4[2], also external data memory write pulse WR. |
| 28 | P4.3/SCLK_3 | bidirectional | Standard I/O PORT4[3], also alternate SPI clock SCLK_3. |
| 29 | P4.4/RD | bidirectional | Standard I/O PORT4[4], also external data memory read pulse RD. |
| 30 | P2.0/A8/RSTOUT_LOW | bidirectional | Standard I/O PORT2[0], also address bus bit A8 and RSTOUT_LOW, which outputs low after power-up and during reset and can be set high or low by software. |
| 31 | P2.1/A9/SCLK_2 | bidirectional | Standard I/O PORT2[1], also address bus bit A9 and alternate SPI clock SCLK_2. |
| 32 | P2.2/A10/MISO_2 | bidirectional | Standard I/O PORT2[2], also address bus bit A10 and alternate SPI master-in/slave-out MISO_2. |
| 33 | P2.3/A11/MOSI_2 | bidirectional | Standard I/O PORT2[3], also address bus bit A11 and alternate SPI master-out/slave-in MOSI_2. |
| 34 | P2.4/A12/ECI_3/SS_2 | bidirectional | Standard I/O PORT2[4], also address bus bit A12, CCP/PCA counter pulse input ECI_3, and alternate SPI slave select SS_2. |
| 35 | P2.5/A13/CCP0_3 | bidirectional | Standard I/O PORT2[5], also address bus bit A13 and CCP0_3 capture/compare/PWM channel 0. |
| 36 | P2.6/A14/CCP1_3 | bidirectional | Standard I/O PORT2[6], also address bus bit A14 and CCP1_3 capture/compare/PWM channel 1. |
| 37 | P2.7/A15/CCP2_3 | bidirectional | Standard I/O PORT2[7], also address bus bit A15 and CCP2_3 capture/compare/PWM channel 2. |
| 38 | P4.5/ALE | bidirectional | Standard I/O PORT4[5], also address latch enable ALE. |
| 39 | P4.6/RxD2_2 | bidirectional | Standard I/O PORT4[6], also alternate UART2 receive data RxD2_2. |
| 40 | P0.0/AD0 | bidirectional | Port 0 bit 0, usable as I/O (quasi-bidirectional/weak pull-up after reset, or push-pull, high-impedance input, open-drain) or as external bus address/data line AD0. |
| 41 | P0.1/AD1 | bidirectional | Port 0 bit 1, usable as I/O (quasi-bidirectional/weak pull-up after reset, or push-pull, high-impedance input, open-drain) or as external bus address/data line AD1. |
| 42 | P0.2/AD2 | bidirectional | Port 0 bit 2, usable as I/O (quasi-bidirectional/weak pull-up after reset, or push-pull, high-impedance input, open-drain) or as external bus address/data line AD2. |
| 43 | P0.3/AD3 | bidirectional | Port 0 bit 3, usable as I/O (quasi-bidirectional/weak pull-up after reset, or push-pull, high-impedance input, open-drain) or as external bus address/data line AD3. |
| 44 | P0.4/AD4 | bidirectional | Port 0 bit 4, usable as I/O (quasi-bidirectional/weak pull-up after reset, or push-pull, high-impedance input, open-drain) or as external bus address/data line AD4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | LQFP-44(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 44 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage | VDD | 2.4 | 3.3 | 3.6 | V | 1374 | |
| Power Down Current | IPD | 0.1 | uA | 3.3V | 1374 | ||
| Operating Current | ICC | 4 | 10 | mA | 3.3V | 1374 | |
| Input Low (P0,P1,P2,P3) | VIL1 | 0.8 | V | 3.3V | 1374 | ||
| Input High (P0,P1,P2,P3) | VIH1 | 2 | V | 3.3V | 1374 | ||
| Input High (RESET) | VIH2 | 2.2 | V | 3.3V | 1374 | ||
| Sourcing Current for output high (P0,P1,P2,P3) (Quasi-output) | IOH1 | 140 | 170 | uA | 3.3V | 1374 | |
| Logic 0 input current (P0,P1,P2,P3) | IIL | 8 | 50 | uA | Vpin=0V | 1374 | |
| Logic 1 to 0 transition current (P0,P1,P2,P3) | ITL | 110 | 600 | uA | Vpin=2.0V | 1374 | |
| Storage temperature | TST | -55 | 125 | ℃ | 1374 | ||
| Operating temperature (I) | TA | -40 | 85 | ℃ | 1374 | ||
| DC power supply (3V) | VDD - VSS | -0.3 | 3.6 | V | 1374 | ||
| Voltage on any pin | -0.3 | V | VCC + 0.3 | 1374 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the | 524 |
CAD (KiCad official)
- Symbol:
IAP15L2K61S2-28I-LQFP44 - Footprint:
Package_QFP:LQFP-44_10x10mm_P0.8mm - 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
iap15l2k61s2-28i-lqfp44-etched.step/iap15l2k61s2-28i-lqfp44-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iap15l2k61s2-28i-lqfp44.step/iap15l2k61s2-28i-lqfp44.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STC Micro datasheet (1473 pp, sha256
c1fab41b0006cc18, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).