Generated by kicad-footprint-generator · KiCad file format 20260206
IAP15F2K61S2-28I-PDIP40
STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · DIP-40
IAP15F2K61S2-28I-PDIP40 from STC Micro, in a DIP-40. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P0.0/AD0 | bidirectional | P0.0 general I/O (quasi-bidirectional/weak pull-up after reset, configurable to push-pull, input-only or open-drain) or multiplexed address/data bus bit AD0. |
| 2 | P0.1/AD1 | bidirectional | P0.1 general I/O (quasi-bidirectional after reset, configurable) or multiplexed address/data bus bit AD1. |
| 3 | P0.2/AD2 | bidirectional | P0.2 general I/O (quasi-bidirectional after reset, configurable) or multiplexed address/data bus bit AD2. |
| 4 | P0.3/AD3 | bidirectional | P0.3 general I/O (quasi-bidirectional after reset, configurable) or multiplexed address/data bus bit AD3. |
| 5 | P0.4/AD4 | bidirectional | P0.4 general I/O (quasi-bidirectional after reset, configurable) or multiplexed address/data bus bit AD4. |
| 6 | P0.5/AD5 | bidirectional | P0.5 general I/O (quasi-bidirectional after reset, configurable) or multiplexed address/data bus bit AD5. |
| 7 | P0.6/AD6 | bidirectional | P0.6 general I/O (quasi-bidirectional after reset, configurable) or multiplexed address/data bus bit AD6. |
| 8 | P0.7/AD7 | bidirectional | P0.7 general I/O (quasi-bidirectional after reset, configurable) or multiplexed address/data bus bit AD7. |
| 9 | P1.0/ADC0/CCP1/RxD2 | bidirectional | P1.0 general I/O, ADC input channel 0, CCP channel 1 (capture/high-speed pulse/PWM), or UART2 receive RxD2. |
| 10 | P1.1/ADC1/CCP0/TxD2 | bidirectional | P1.1 general I/O, ADC input channel 1, CCP channel 0 (capture/high-speed pulse/PWM), or UART2 transmit TxD2. |
| 11 | P1.2/ADC2/SS/ECI | bidirectional | P1.2 general I/O, ADC input channel 2, SPI slave select SS, or external pulse input ECI of the CCP/PCA counter. |
| 12 | P1.3/ADC3/MOSI | bidirectional | P1.3 general I/O, ADC input channel 3, or SPI master-out slave-in MOSI. |
| 13 | P1.4/ADC4/MISO | bidirectional | P1.4 general I/O, ADC input channel 4, or SPI master-in slave-out MISO. |
| 14 | P1.5/ADC5/SCLK | bidirectional | P1.5 general I/O, ADC input channel 5, or SPI clock SCLK. |
| 15 | P1.6/ADC6/RxD_3/XTAL2 | bidirectional | P1.6 general I/O, ADC input channel 6, UART1 receive RxD_3, or inverting amplifier output XTAL2 for an external crystal. |
| 16 | P1.7/ADC7/TxD_3/XTAL1 | bidirectional | P1.7 general I/O, ADC input channel 7, UART1 transmit TxD_3, or oscillator input XTAL1 (external crystal or clock source input). |
| 17 | P5.4/RST/MCLKO/SS_3 | bidirectional | P5.4 general I/O (default), active-high reset pin RST when enabled in STC-ISP, main clock output MCLKO (MCLK/1, /2 or /4), or SPI slave select SS_3. |
| 18 | Vcc | power_in | Positive power supply (5.5V-4.5V for STC15F series). |
| 19 | P5.5 | bidirectional | P5.5 general-purpose I/O port. |
| 20 | Gnd | power_in | Power ground (negative supply). |
| 21 | P3.0/RxD/INT4/T2CLKO | bidirectional | P3.0 general I/O, UART1 receive RxD (also ISP download pin), external interrupt INT4 (falling edge only, wakes from power-down), or T2 clock output T2CLKO. |
| 22 | P3.1/TxD/T2 | bidirectional | P3.1 general I/O, UART1 transmit TxD (also ISP download pin), or Timer/Counter 2 external input T2. |
| 23 | P3.2/INT0 | bidirectional | P3.2 general I/O or external interrupt INT0 (rising and falling edge, or falling only if IT0=1; wakes from power-down). |
| 24 | P3.3/INT1 | bidirectional | P3.3 general I/O or external interrupt INT1 (rising and falling edge, or falling only if IT1=1; wakes from power-down). |
| 25 | P3.4/T0/T1CLKO/ECI_2 | bidirectional | P3.4 general I/O, Timer/Counter 0 external input T0, T1 clock output T1CLKO, or CCP/PCA counter external pulse input ECI_2. |
| 26 | P3.5/T1/T0CLKO/CCP0_2 | bidirectional | P3.5 general I/O, Timer/Counter 1 external input T1, T0 clock output T0CLKO, or CCP channel 0 (CCP0_2). |
| 27 | P3.6/INT2/RxD_2/CCP1_2 | bidirectional | P3.6 general I/O, external interrupt INT2 (falling edge only, wakes from power-down), UART1 receive RxD_2, or CCP channel 1 (CCP1_2). |
| 28 | P3.7/INT3/TxD_2/CCP2/CCP2_2 | bidirectional | P3.7 general I/O, external interrupt INT3 (falling edge only, wakes from power-down), UART1 transmit TxD_2, or CCP channel 2 (CCP2/CCP2_2). |
| 29 | P4.1/MISO_3 | bidirectional | P4.1 general-purpose I/O, with SPI function MISO_3 per the pin diagram. |
| 30 | P4.2/WR | bidirectional | P4.2 general I/O or external data memory write strobe WR. |
| 31 | P4.4/RD | bidirectional | P4.4 general I/O or external data memory read strobe RD. |
| 32 | P2.0/A8/RSTOUT_LOW | bidirectional | P2.0 general I/O, address bus bit A8, or RSTOUT_LOW which outputs low after power-up and during reset and can then be set high or low by software. |
| 33 | P2.1/A9/SCLK_2 | bidirectional | P2.1 general I/O, address bus bit A9, or SPI clock SCLK_2. |
| 34 | P2.2/A10/MISO_2 | bidirectional | P2.2 general I/O, address bus bit A10, or SPI master-in slave-out MISO_2. |
| 35 | P2.3/A11/MOSI_2 | bidirectional | P2.3 general I/O, address bus bit A11, or SPI master-out slave-in MOSI_2. |
| 36 | P2.4/A12/ECI_3/SS_2 | bidirectional | P2.4 general I/O, address bus bit A12, CCP/PCA counter external pulse input ECI_3, or SPI slave select SS_2. |
| 37 | P2.5/A13/CCP0_3 | bidirectional | P2.5 general I/O, address bus bit A13, or CCP channel 0 (CCP0_3). |
| 38 | P2.6/A14/CCP1_3 | bidirectional | P2.6 general I/O, address bus bit A14, or CCP channel 1 (CCP1_3). |
| 39 | P2.7/A15/CCP2_3 | bidirectional | P2.7 general I/O, address bus bit A15, or CCP channel 2 (CCP2_3). |
| 40 | P4.5/ALE | bidirectional | P4.5 general I/O or address latch enable ALE. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | DIP-40 |
| Category | Embedded Processors & Controllers |
| Pins | 40 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Operating Voltage | VDD | 3.3 | 5 | 5.5 | V | 1374 | |
| Input Low (P0,P1,P2,P3) | VIL1 | 0.8 | V | 5V | 1374 | ||
| Input High (P0,P1,P2,P3) | VIH1 | 2 | V | 5V | 1374 | ||
| Input High (RESET) | VIH2 | 2.2 | V | 5V | 1374 | ||
| Operating Current | ICC | 4 | 20 | mA | 5V | 1374 | |
| Sourcing Current for output high (P0,P1,P2,P3) (Quasi-output) | IOH1 | 200 | 270 | uA | 5V | 1374 | |
| Logic 0 input current (P0,P1,P2,P3) | IIL | 50 | uA | Vpin=0V | 1374 | ||
| Logic 1 to 0 transition current (P0,P1,P2,P3) | ITL | 100 | 270 | 600 | uA | Vpin=2.0V | 1374 |
| Storage temperature | TST | -55 | 125 | ℃ | 1374 | ||
| Operating temperature (I) | TA | -40 | 85 | ℃ | 1374 | ||
| DC power supply (5V) | VDD - VSS | -0.3 | 5.5 | V | 1374 | ||
| Voltage on any pin | -0.3 | V | 1374 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the | 524 |
CAD (KiCad official)
- Symbol:
IAP15F2K61S2-28I-PDIP40 - Footprint:
Package_DIP:DIP-40_W15.24mm - 3D model: DIP-40_W15.24mm (KiCad packages3D, STEP)
- 3D model files:
iap15f2k61s2-28i-pdip40-etched.step/iap15f2k61s2-28i-pdip40-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iap15f2k61s2-28i-pdip40.step/iap15f2k61s2-28i-pdip40.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STC Micro datasheet (1473 pp, sha256
029f2a16143f5535, retrieved 2026-11-10, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).