3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownIAP15F2K61S2-28I-LQFP44
STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-44(10x10)
IAP15F2K61S2-28I-LQFP44 from STC Micro, in a LQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P0.5/AD5 | bidirectional | Port 0 bit 5 general I/O (quasi-bidirectional after reset) or multiplexed address/data bus line AD5. |
| 2 | P0.6/AD6 | bidirectional | Port 0 bit 6 general I/O (quasi-bidirectional after reset) or multiplexed address/data bus line AD6. |
| 3 | P0.7/AD7 | bidirectional | Port 0 bit 7 general I/O (quasi-bidirectional after reset) or multiplexed address/data bus line AD7. |
| 4 | P1.0/ADC0/CCP1/RxD2 | bidirectional | Port 1 bit 0 I/O, ADC input channel 0, CCP channel 1 capture/PWM, or UART2 receive. |
| 5 | P1.1/ADC1/CCP0/TxD2 | bidirectional | Port 1 bit 1 I/O, ADC input channel 1, CCP channel 0 capture/PWM, or UART2 transmit. |
| 6 | P4.7/TxD2_2 | bidirectional | Port 4 bit 7 general I/O or alternate UART2 transmit (needs 3.3K pull-up in weak pull-up mode when used as TxD2). |
| 7 | P1.2/ADC2/SS/ECI | bidirectional | Port 1 bit 2 I/O, ADC input channel 2, SPI slave select, or CCP/PCA counter external pulse input. |
| 8 | P1.3/ADC3/MOSI | bidirectional | Port 1 bit 3 I/O, ADC input channel 3, or SPI master-out slave-in. |
| 9 | P1.4/ADC4/MISO | bidirectional | Port 1 bit 4 I/O, ADC input channel 4, or SPI master-in slave-out. |
| 10 | P1.5/ADC5/SCLK | bidirectional | Port 1 bit 5 I/O, ADC input channel 5, or SPI clock. |
| 11 | P1.6/ADC6/RxD_3/XTAL2 | bidirectional | Port 1 bit 6 I/O, ADC input channel 6, alternate UART1 receive, or crystal oscillator inverter output XTAL2. |
| 12 | P1.7/ADC7/TxD_3/XTAL1 | bidirectional | Port 1 bit 7 I/O, ADC input channel 7, alternate UART1 transmit, or crystal oscillator input / external clock input XTAL1. |
| 13 | P5.4/RST/MCLKO/SS_3 | bidirectional | Port 5 bit 4 I/O (default), high-active reset pin when set in ISP, main clock output (MCLK/1, /2, /4), or alternate SPI slave select. |
| 14 | Vcc | power_in | Positive supply; datasheet lists 5.5V-4.5V operating voltage for the STC15F2K60S2 family. |
| 15 | P5.5 | bidirectional | Port 5 bit 5 general-purpose I/O. |
| 16 | Gnd | power_in | Negative supply, ground. |
| 17 | P4.0/MOSI_3 | bidirectional | Port 4 bit 0 general I/O or alternate SPI master-out slave-in (MOSI_3). |
| 18 | P3.0/RxD/INT4/T2CLKO | bidirectional | Port 3 bit 0 I/O, UART1 receive, external interrupt 4 (falling edge only, wakes from power-down), or Timer 2 clock output. |
| 19 | P3.1/TxD/T2 | bidirectional | Port 3 bit 1 I/O, UART1 transmit, or Timer/Counter 2 external input. |
| 20 | P3.2/INT0 | bidirectional | Port 3 bit 2 I/O or external interrupt 0 (rising and falling edge, or falling only if IT0=1; wakes from power-down). |
| 21 | P3.3/INT1 | bidirectional | Port 3 bit 3 I/O or external interrupt 1 (rising and falling edge, or falling only if IT1=1; wakes from power-down). |
| 22 | P3.4/T0/T1CLKO/ECI_2 | bidirectional | Port 3 bit 4 I/O, Timer 0 external input, Timer 1 clock output, or alternate CCP/PCA counter pulse input. |
| 23 | P3.5/T1/T0CLKO/CCP0_2 | bidirectional | Port 3 bit 5 I/O, Timer 1 external input, Timer 0 clock output, or alternate CCP channel 0. |
| 24 | P3.6/INT2/RxD_2/CCP1_2 | bidirectional | Port 3 bit 6 I/O, external interrupt 2 (falling edge only, wakes from power-down), alternate UART1 receive, or alternate CCP channel 1. |
| 25 | P3.7/INT3/TxD_2/CCP2/CCP2_2 | bidirectional | Port 3 bit 7 I/O, external interrupt 3 (falling edge only, wakes from power-down), alternate UART1 transmit, or CCP channel 2. |
| 26 | P4.1/MISO_3 | bidirectional | Port 4 bit 1 general I/O or alternate SPI master-in slave-out (MISO_3). |
| 27 | P4.2/WR | bidirectional | Port 4 bit 2 general I/O or external data memory write strobe. |
| 28 | P4.3/SCLK_3 | bidirectional | Port 4 bit 3 general I/O or alternate SPI clock. |
| 29 | P4.4/RD | bidirectional | Port 4 bit 4 general I/O or external data memory read strobe. |
| 30 | P2.0/A8/RSTOUT_LOW | bidirectional | Port 2 bit 0 I/O, address bit A8, or RSTOUT_LOW output that is low after power-up and during reset (software settable). |
| 31 | P2.1/A9/SCLK_2 | bidirectional | Port 2 bit 1 I/O, address bit A9, or alternate SPI clock. |
| 32 | P2.2/A10/MISO_2 | bidirectional | Port 2 bit 2 I/O, address bit A10, or alternate SPI master-in slave-out. |
| 33 | P2.3/A11/MOSI_2 | bidirectional | Port 2 bit 3 I/O, address bit A11, or alternate SPI master-out slave-in. |
| 34 | P2.4/A12/ECI_3/SS_2 | bidirectional | Port 2 bit 4 I/O, address bit A12, alternate CCP/PCA counter pulse input, or alternate SPI slave select. |
| 35 | P2.5/A13/CCP0_3 | bidirectional | Port 2 bit 5 I/O, address bit A13, or alternate CCP channel 0 capture/PWM. |
| 36 | P2.6/A14/CCP1_3 | bidirectional | Port 2 bit 6 I/O, address bit A14, or alternate CCP channel 1 capture/PWM. |
| 37 | P2.7/A15/CCP2_3 | bidirectional | Port 2 bit 7 I/O, address bit A15, or alternate CCP channel 2 capture/PWM. |
| 38 | P4.5/ALE | bidirectional | Port 4 bit 5 general I/O or address latch enable. |
| 39 | P4.6/RxD2_2 | bidirectional | Port 4 bit 6 general I/O or alternate UART2 receive. |
| 40 | P0.0/AD0 | bidirectional | Port 0 bit 0 general I/O (quasi-bidirectional after reset) or multiplexed address/data bus line AD0. |
| 41 | P0.1/AD1 | bidirectional | Port 0 bit 1 general I/O (quasi-bidirectional after reset) or multiplexed address/data bus line AD1. |
| 42 | P0.2/AD2 | bidirectional | Port 0 bit 2 general I/O (quasi-bidirectional after reset) or multiplexed address/data bus line AD2. |
| 43 | P0.3/AD3 | bidirectional | Port 0 bit 3 general I/O (quasi-bidirectional after reset) or multiplexed address/data bus line AD3. |
| 44 | P0.4/AD4 | bidirectional | Port 0 bit 4 general I/O (quasi-bidirectional after reset) or multiplexed address/data bus line AD4. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | LQFP-44(10x10) |
| Category | Embedded Processors & Controllers |
| Pins | 44 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TST | -55 | 125 | ℃ | 1374 | ||
| Operating temperature (I) | TA | -40 | 85 | ℃ | 1374 | ||
| DC power supply (5V) | VDD - VSS | -0.3 | 5.5 | V | 1374 | ||
| VDD Operating Voltage (5V MCU) | VDD | 3.3 | 5 | 5.5 | V | 1374 | |
| Input Low (P0,P1,P2,P3) | VIL1 | 0.8 | V | 5V | 1374 | ||
| Input High (P0,P1,P2,P3) | VIH1 | 2 | V | 5V | 1374 | ||
| Input High (RESET) | VIH2 | 2.2 | V | 5V | 1374 | ||
| Logic 0 input current (P0,P1,P2,P3) | IIL | 50 | uA | Vpin=0V | 1374 | ||
| Logic 1 to 0 transition current (P0,P1,P2,P3) | ITL | 100 | 270 | 600 | uA | Vpin=2.0V | 1374 |
| Sourcing Current for output high (P0,P1,P2,P3) (Quasi-output) | IOH1 | 200 | 270 | uA | 5V | 1374 | |
| Sourcing Current for output high (P0,P1,P2,P3) (Push-Pull, Strong-output) | IOH2 | 20 | mA | 5V@Vpin=2.4V | 1374 | ||
| Sink Current for output low (P0,P1,P2,P3) | IOL1 | 20 | mA | 5V@Vpin=0.45V | 1374 | ||
| Power Down Current | IPD | 0.1 | uA | 5V; printed as '< 0.1' in the Typ column | 1374 | ||
| Idle Current | IIDL | 3 | mA | 5V | 1374 | ||
| Operating Current | ICC | 4 | 20 | mA | 5V | 1374 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the | 524 |
CAD (KiCad official)
- Symbol:
IAP15F2K61S2-28I-LQFP44 - Footprint:
Package_QFP:LQFP-44_10x10mm_P0.8mm - 3D model: LQFP-44(10x10) (KiCad packages3D, STEP)
- 3D model files:
iap15f2k61s2-28i-lqfp44-etched.step/iap15f2k61s2-28i-lqfp44-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iap15f2k61s2-28i-lqfp44.step/iap15f2k61s2-28i-lqfp44.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STC Micro datasheet (1473 pp, sha256
c1fab41b0006cc18, retrieved 2026-11-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).