component
I2360SYI
Public Made by Adomby adom
Nuvoton Tech Microcontrollers (MCU/MPU/SOC), SOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 4h ago |
| viewers | 4h ago |
| i2360syi-etched.glb | 4h ago |
| i2360syi-etched.step | 4h ago |
| i2360syi-hero.glb | 4h ago |
| i2360syi-hero.overlay.json | 4h ago |
| i2360syi.glb | 4h ago |
| i2360syi.kicad_mod | 4h ago |
| i2360syi.kicad_sym | 4h ago |
| i2360syi.lbr | 4h ago |
| i2360syi.step | 4h ago |
| package.json | 4h ago |
| page.json | 4h ago |
| README.md | 4h ago |
I2360SYI
Nuvoton Tech · Microcontrollers (MCU/MPU/SOC) · SOP-16
I2360SYI from Nuvoton Tech, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GPIO2/MISO | bidirectional | Serial output (MISO) from the ISD2360 to the host, tri-state when SSB=1; can be configured as a general purpose I/O pin. |
| 2 | GPIO1/SCLK | input | Serial clock input from the host; can be configured as a general purpose input pin. |
| 3 | SSB | input | Active-low slave select input from the host, with an internal pull-up to Vccd; when low the device responds to SPI commands. |
| 4 | GPIO0/MOSI | bidirectional | Serial input (MOSI) to the ISD2360 from the host; can be configured as a general purpose I/O pin. |
| 5 | VSSD | power_in | Digital ground. |
| 6 | VCC_PWM | power_in | Digital power for the PWM driver, which can come from a separate supply than VCCD (2.4V to 5.5V operating range). |
| 7 | SPK+ | output | PWM driver positive output that with SPK- forms a differential output to drive an 8 ohm speaker or buzzer; tri-state during power down. |
| 8 | VSS_PWM | power_in | Digital ground for the PWM driver. |
| 9 | VSS_PWM | power_in | Digital ground for the PWM driver. |
| 10 | SPK- | output | PWM driver negative output that with SPK+ forms a differential output to drive an 8 ohm speaker or buzzer; tri-state during power down. |
| 11 | VCC_PWM | power_in | Digital power for the PWM driver, which can come from a separate supply than VCCD (2.4V to 5.5V operating range). |
| 12 | NC | unconnected | No connect; this pin should be left unconnected. |
| 13 | GPIO3/INTB | bidirectional | Active-low open-drain interrupt request output; can be configured as a general purpose I/O pin. |
| 14 | GPIO4/RDY/BSYB | bidirectional | Reports SPI data transfer status, high meaning ready to accept new SPI commands or data; can be configured as a general purpose I/O pin. |
| 15 | VCCD | power_in | Digital power, which can come from a separate supply than VCCD_PWM (2.4V to 5.5V operating range). |
| 16 | XCLK | bidirectional | Labelled XCLK on the SOP-16 drawing; the datasheet's application diagram shows GPIO5/XCLK, and GPIO5 is a general purpose I/O pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Nuvoton Tech |
| Package | SOP-16 |
| Category | Embedded Processors & Controllers |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC Power Supply VCCD | VCCD | -0.3 | 6 | V | VCCD, VSSD | 25 | |
| DC Power Supply VCCPWM | VCCPWM | -0.3 | 6 | V | VCCPWM, VSSPWM | 25 | |
| Digital Input Voltage | DVIN | -0.3 | 0.3 | V | DVIN - VSSD; printed as VSSD, 0.3 to VCCD + 0.3 | 25 | |
| Junction Temperature | TJ | -40 | 125 | °C | 25 | ||
| Storage Temperature | Tst | -65 | 150 | °C | 25 | ||
| Operating temperature range (Case temperature) | -40 | 85 | °C | Industrial packaged parts | 25 | ||
| Supply voltage | VDD | 2.4 | 5.5 | V | VDD = VCCD = VCCPWM | 25 | |
| Ground voltage | VSS | 0 | 0 | V | VSS = VSSD = VSSPWM | 25 | |
| Digital input voltage | DVIN | 0 | 5.5 | V | 25 | ||
| Sample rate with Internal Oscillator (tolerance) | FSmax | -1 | 1 | % | Vdd = 3V. At room temperature | 25 | |
| Sample rate with Internal Oscillator (nominal) | FSmax | 32 | kHz | Vdd = 3V. At room temperature | 25 | ||
| Minimum Load Impedance | RL(SPK) | 4 | 8 | Ω | 26 | ||
| SNR, Memory to SPK+/SPK- | SNRMEM_SPK | 60 | dB | Load 150 Ω | 26 | ||
| Output Power | POUT_SPK | 400 | mW | @ 3.3V, Load 4Ω | 26 | ||
| Output Power | POUT_SPK | 1.1 | W | @ 5.0V, Load 4Ω | 26 | ||
| Output Power | POUT_SPK | 1.3 | W | @ 5.5V, Load 4Ω | 26 | ||
| Output Power | POUT_SPK | 330 | mW | @ 3.3V, Load 8Ω | 26 | ||
| Output Power | POUT_SPK | 850 | mW | @ 5.0V, Load 8Ω | 26 | ||
| Output Power | POUT_SPK | 1 | W | @ 5.5V, Load 8Ω | 26 |
CAD (KiCad official)
- Symbol:
I2360SYI - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
i2360syi-etched.step/i2360syi-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);i2360syi.step/i2360syi.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Nuvoton Tech datasheet (35 pp, sha256
da28bf08d5e8a427, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).