main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs hy2112-ab: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers hy2112-ab: viewers · Ray
hy2112-ab-etched.fit.json hy2112-ab: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hy2112-ab-etched.glb hy2112-ab: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hy2112-ab-etched.step hy2112-ab: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
hy2112-ab.glb Publish 0.1.0 · Ray
hy2112-ab.kicad_mod Publish 0.1.0 · Ray
hy2112-ab.kicad_sym Publish 0.1.0 · Ray
hy2112-ab.lbr Publish 0.1.0 · Ray
hy2112-ab.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json hy2112-ab: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md hy2112-ab: laser-etched CAD + chip hero (factory 2.0.0 backfill) · Ray

HY2112-AB

HYCON Tech · Battery Management · SOT-23-6

HY2112-AB from HYCON Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OD output Discharge control MOSFET gate drive output. Drives the gate of the external discharge-control N-MOSFET; V_OH ≈ VDD-0.02V, V_OL ≈ 0.1V. Pulled low to disable discharging under overdischarge, discharge overcurrent, or load short-circuit conditions.
2 CS input Overcurrent detection input and charger detection terminal. Senses the voltage across the series MOSFET stack for discharge/charge overcurrent (V_DIP=+100mV, V_CIP=-200mV for -AB) and load short-circuit (V_SIP=0.85V) detection. High-voltage tolerant (rated VDD-20 to VDD+0.3V, abs-max ~20V) to allow charger connection.
3 OC output Charge control MOSFET gate drive output. Drives the gate of the external charge-control N-MOSFET; V_OH ≈ VDD-0.02V, V_OL ≈ 0.1V. Pulled low to disable charging under overcharge or charge overcurrent conditions. Uses a level-shifter to tolerate charger-side high voltages (abs-max VDD-20 to VDD+0.3V).
4 NC unconnected No internal connection. Leave floating or tie to VSS at the board designer's discretion.
5 VDD power_in Positive supply input; connects to the battery positive terminal through a decoupling resistor. Operating range VDD-VSS = 1.5V to 8V (abs-max 10V). Typical operating current 3.0 µA at VDD=3.2V (max 6.0 µA); sleep-mode current 0.1 µA max.
6 VSS power_in Ground / negative supply input; connects to the battery negative terminal (reference for all internal detection thresholds).

Key specifications

Parameter Value
Manufacturer HYCON Tech
Package SOT-23-6
Category PMIC
Pins 6

Ordering variants

Same part, different packaging or reel option.

  • HY2112-AB
  • HY2112-ABBB
  • HY2112-ABCB
  • HY2112-ABEB
  • HY2112-ABGB
  • HY2112-ABHB

CAD (KiCad official)

  • Symbol: HY2112-AB
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: hy2112-ab-etched.step / hy2112-ab-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); hy2112-ab.step / hy2112-ab.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HYCON Tech datasheet (17 pp, sha256 003247d01174fb89, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF