component
HXL1509-ADJ
Public Made by Adomby adom
HXY MOSFET DC-DC Converters, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
HXL1509-ADJ
HXY MOSFET · DC-DC Converters · SOP-8
HXL1509-ADJ from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply voltage input for the switching regulator, operating range 4.5V to 40V; needs a suitable input bypass capacitor to minimize voltage transients and supply switching currents. |
| 2 | Output | output | Internal power switching output that swings between (+Vin - Vsat) and approximately -0.5V with duty cycle of approximately Vout/Vin; keep the connected PCB copper area small to minimize coupling. |
| 3 | FB | input | Output voltage feedback control input that senses the regulated output voltage to close the loop, with feedback voltage of 1.230V typical on the adjustable version. |
| 4 | EN | input | ON/OFF shutdown input: pulling it below approximately 1.3V turns the regulator on, above 1.3V shuts it down, and it can be wired to ground if shutdown is not needed. |
| 5 | GND | power_in | Circuit ground. |
| 6 | GND | power_in | Circuit ground. |
| 7 | GND | power_in | Circuit ground. |
| 8 | GND | power_in | Circuit ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Feedback Voltage (HXL1509-ADJ) | VFB | 1.193 | 1.23 | 1.267 | V | 4.5V ≤ VIN ≤ 40V; 0.2A ≤ ILOAD ≤ 3A; VOUT programmed for 3V | 4 |
| Oscillator Frequency | Fosc | 127 | 150 | 173 | kHz | 3 | |
| Current Limit | ICL | 3 | 4 | A | Output=0 | 3 | |
| Output Leakage Current | IL | 2 | mA | Output=-1 | 3 | ||
| Max. Duty Cycle (ON) | 93 | 98 | % | IOUT=2A, no outside circuit; VFB=0V force driver on | 3 | ||
| Min. Duty Cycle (OFF) | DC | 0 | % | VFB=12V force driver off | 3 | ||
| Saturation Voltage | VSAT | 1.2 | 1.5 | V | 3 | ||
| Feedback Bias Current | IFB | 50 | 100 | nA | VFB=1.3V (Adjustable version only) | 3 | |
| Peak Current | 5 | 20 | mA | VIN=40V | 3 | ||
| Quiescent Current | IQ | 5 | 10 | mA | VFB=12V force driver off | 3 | |
| Standby Quiescent Current | ISTBY | 50 | 200 | μA | ON/OFF pin=5V; VIN=40V | 3 | |
| ON/OFF Pin Logic Input Threshold Voltage, Low (regulator ON) | VIH | 0.6 | V | Low (regulator ON) | 3 | ||
| ON/OFF Pin Logic Input Threshold Voltage, High (regulator OFF) | VIH | 2 | V | High (regulator OFF) | 3 | ||
| ON/OFF Pin Input Current, OFF | IH | 12 | 30 | μA | VLOGIC=5.0V (OFF) | 3 | |
| ON/OFF Pin Input Current, ON | IL | 0 | 10 | μA | VLOGIC=0.5V (ON) | 3 | |
| Thermal Resistance, Junction to Case | ӨJC | 15 | C/W | Thermal resistance with copper area of approximately 3 in² | 3 | ||
| Thermal Resistance, Junction to Ambient | ӨJA | 70 | C/W | 3 | |||
| Supply Voltage | VIN | 40 | V | 2 | |||
| ON/OFF Pin Input Voltage | VSD | -0.3 | V | Upper limit is VIN (printed as -0.3~VIN) | 2 | ||
| Feedback Pin Voltage | VFB | -0.3 | V | Upper limit is VIN (printed as -0.3~VIN) | 2 | ||
| Output Voltage to Ground | VOUT | -1 | V | 2 | |||
| Storage Temperature | Tstg | -65 | 150 | C | 2 | ||
| Operating Temperature | Topr | -40 | 125 | C | 2 | ||
| Operating Voltage | VOP | 4.5 | 40 | V | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | board copper area connected to this pin should be minimized. | 4 |
CAD (KiCad official)
- Symbol:
HXL1509-ADJ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hxl1509-adj-etched.step/hxl1509-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hxl1509-adj.step/hxl1509-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (8 pp, sha256
9fccd60659b2ee4b, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HXL1509-ADJ
**HXY MOSFET** · DC-DC Converters · SOP-8
HXL1509-ADJ from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply voltage input for the switching regulator, operating range 4.5V to 40V; needs a suitable input bypass capacitor to minimize voltage transients and supply switching currents. |
| 2 | Output | output | Internal power switching output that swings between (+Vin - Vsat) and approximately -0.5V with duty cycle of approximately Vout/Vin; keep the connected PCB copper area small to minimize coupling. |
| 3 | FB | input | Output voltage feedback control input that senses the regulated output voltage to close the loop, with feedback voltage of 1.230V typical on the adjustable version. |
| 4 | EN | input | ON/OFF shutdown input: pulling it below approximately 1.3V turns the regulator on, above 1.3V shuts it down, and it can be wired to ground if shutdown is not needed. |
| 5 | GND | power_in | Circuit ground. |
| 6 | GND | power_in | Circuit ground. |
| 7 | GND | power_in | Circuit ground. |
| 8 | GND | power_in | Circuit ground. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Feedback Voltage (HXL1509-ADJ) | VFB | 1.193 | 1.23 | 1.267 | V | 4.5V ≤ VIN ≤ 40V; 0.2A ≤ ILOAD ≤ 3A; VOUT programmed for 3V | 4 |
| Oscillator Frequency | Fosc | 127 | 150 | 173 | kHz | | 3 |
| Current Limit | ICL | 3 | | 4 | A | Output=0 | 3 |
| Output Leakage Current | IL | | | 2 | mA | Output=-1 | 3 |
| Max. Duty Cycle (ON) | | 93 | 98 | | % | IOUT=2A, no outside circuit; VFB=0V force driver on | 3 |
| Min. Duty Cycle (OFF) | DC | 0 | | | % | VFB=12V force driver off | 3 |
| Saturation Voltage | VSAT | | 1.2 | 1.5 | V | | 3 |
| Feedback Bias Current | IFB | | 50 | 100 | nA | VFB=1.3V (Adjustable version only) | 3 |
| Peak Current | | | 5 | 20 | mA | VIN=40V | 3 |
| Quiescent Current | IQ | | 5 | 10 | mA | VFB=12V force driver off | 3 |
| Standby Quiescent Current | ISTBY | | 50 | 200 | μA | ON/OFF pin=5V; VIN=40V | 3 |
| ON/OFF Pin Logic Input Threshold Voltage, Low (regulator ON) | VIH | | | 0.6 | V | Low (regulator ON) | 3 |
| ON/OFF Pin Logic Input Threshold Voltage, High (regulator OFF) | VIH | 2 | | | V | High (regulator OFF) | 3 |
| ON/OFF Pin Input Current, OFF | IH | | 12 | 30 | μA | VLOGIC=5.0V (OFF) | 3 |
| ON/OFF Pin Input Current, ON | IL | | 0 | 10 | μA | VLOGIC=0.5V (ON) | 3 |
| Thermal Resistance, Junction to Case | ӨJC | | 15 | | C/W | Thermal resistance with copper area of approximately 3 in² | 3 |
| Thermal Resistance, Junction to Ambient | ӨJA | | 70 | | C/W | | 3 |
| Supply Voltage | VIN | | | 40 | V | | 2 |
| ON/OFF Pin Input Voltage | VSD | -0.3 | | | V | Upper limit is VIN (printed as -0.3~VIN) | 2 |
| Feedback Pin Voltage | VFB | -0.3 | | | V | Upper limit is VIN (printed as -0.3~VIN) | 2 |
| Output Voltage to Ground | VOUT | -1 | | | V | | 2 |
| Storage Temperature | Tstg | -65 | | 150 | C | | 2 |
| Operating Temperature | Topr | -40 | | 125 | C | | 2 |
| Operating Voltage | VOP | 4.5 | | 40 | V | | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | board copper area connected to this pin should be minimized. | 4 |
## CAD (KiCad official)
- Symbol: `HXL1509-ADJ`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `hxl1509-adj-etched.step` / `hxl1509-adj-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hxl1509-adj.step` / `hxl1509-adj.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HXY MOSFET datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603230170228531200) (8 pp, sha256 `9fccd60659b2ee4b`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hxl1509-adj-datasheet.pdf)