main
Ray
hxl1509-5-0: laser-etched CAD + chip hero (factory 2.0.0 backfill)
cd2ff64
HXL1509-5.0
HXY MOSFET · DC-DC Converters · SOP-8
HXL1509-5.0 from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Positive input supply for the switching regulator, 4.5 V to 40 V (absolute max +40 V). Requires a local bypass capacitor to minimize voltage transients and supply switching current. |
| 2 | Output | output | Internal power switching output (emitter of the internal NPN switch). Swings between (VIN - VSAT) and approximately -0.5 V at ~150 kHz with duty cycle ≈ VOUT/VIN. Connect to the external inductor and Schottky catch diode; keep copper area minimal to reduce noise coupling. |
| 3 | FB | input | Output voltage feedback input to the internal error amplifier. For the fixed 5.0 V version this pin connects directly to the regulated 5.0 V output rail (internal divider sets VOUT = 5.00 V ±4%). Feedback bias current typ 50 nA. Abs-max -0.3 V to VIN. |
| 4 | EN | input | ON/OFF shutdown control (active-high shutdown). VIL ≤ 0.6 V enables the regulator; VIH ≥ 2.0 V disables it and drops supply current to ~50 µA (typ) standby. Input current typ 12 µA at 5 V. Tie to GND if shutdown is not used. Abs-max -0.3 V to VIN. |
| 5 | GND | power_in | Circuit ground. Pins 5, 6, 7, and 8 are all tied to GND on the SOP-8 package and also serve as a thermal path; connect all four to the ground plane for best thermal performance. |
| 6 | GND | power_in | Circuit ground / thermal pin. Tie to the ground plane along with pins 5, 7, and 8. |
| 7 | GND | power_in | Circuit ground / thermal pin. Tie to the ground plane along with pins 5, 6, and 8. |
| 8 | GND | power_in | Circuit ground / thermal pin. Tie to the ground plane along with pins 5, 6, and 7. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | PMIC |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
HXL1509-5.0HXL1509-5.0-5V
CAD (KiCad official)
- Symbol:
HXL1509-5.0 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hxl1509-5-0-etched.step/hxl1509-5-0-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hxl1509-5-0.step/hxl1509-5-0.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (8 pp, sha256
5430e25b77bdb834, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HXL1509-5.0
**HXY MOSFET** · DC-DC Converters · SOP-8
HXL1509-5.0 from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Positive input supply for the switching regulator, 4.5 V to 40 V (absolute max +40 V). Requires a local bypass capacitor to minimize voltage transients and supply switching current. |
| 2 | Output | output | Internal power switching output (emitter of the internal NPN switch). Swings between (VIN - VSAT) and approximately -0.5 V at ~150 kHz with duty cycle ≈ VOUT/VIN. Connect to the external inductor and Schottky catch diode; keep copper area minimal to reduce noise coupling. |
| 3 | FB | input | Output voltage feedback input to the internal error amplifier. For the fixed 5.0 V version this pin connects directly to the regulated 5.0 V output rail (internal divider sets VOUT = 5.00 V ±4%). Feedback bias current typ 50 nA. Abs-max -0.3 V to VIN. |
| 4 | EN | input | ON/OFF shutdown control (active-high shutdown). VIL ≤ 0.6 V enables the regulator; VIH ≥ 2.0 V disables it and drops supply current to ~50 µA (typ) standby. Input current typ 12 µA at 5 V. Tie to GND if shutdown is not used. Abs-max -0.3 V to VIN. |
| 5 | GND | power_in | Circuit ground. Pins 5, 6, 7, and 8 are all tied to GND on the SOP-8 package and also serve as a thermal path; connect all four to the ground plane for best thermal performance. |
| 6 | GND | power_in | Circuit ground / thermal pin. Tie to the ground plane along with pins 5, 7, and 8. |
| 7 | GND | power_in | Circuit ground / thermal pin. Tie to the ground plane along with pins 5, 6, and 8. |
| 8 | GND | power_in | Circuit ground / thermal pin. Tie to the ground plane along with pins 5, 6, and 7. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | PMIC |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `HXL1509-5.0`
- `HXL1509-5.0-5V`
## CAD (KiCad official)
- Symbol: `HXL1509-5.0`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `hxl1509-5-0-etched.step` / `hxl1509-5-0-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hxl1509-5-0.step` / `hxl1509-5-0.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HXY MOSFET datasheet](docs/hxl1509-5-0-datasheet.pdf) (8 pp, sha256 `5430e25b77bdb834`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hxl1509-5-0-datasheet.pdf)