component
HXL1509-3.3
Public Made by Adomby adom
HXY MOSFET DC-DC Converters, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
HXL1509-3.3
HXY MOSFET · DC-DC Converters · SOP-8
HXL1509-3.3 from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Positive supply input for the switching regulator, operating range 4.5V to 40V, needing a nearby input bypass capacitor to minimize voltage transients and supply switching currents. |
| 2 | Output | output | Internal power switching output that swings between (VIN - VSAT) and about -0.5V with duty cycle of about VOUT/VIN, and its PCB copper area should be minimized to limit coupling. |
| 3 | FB | input | Feedback pin that senses the regulated output voltage to complete the feedback loop, with 1.230V typical reference on the adjustable version. |
| 4 | EN | input | ON/OFF shutdown input, logic low below about 1.3V turns the regulator on and high above it shuts it down to standby, and it can be wired to ground if unused. |
| 5 | GND | power_in | Circuit ground. |
| 6 | GND | power_in | Circuit ground. |
| 7 | GND | power_in | Circuit ground. |
| 8 | GND | power_in | Circuit ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 3.168 | 3.3 | 3.432 | V | 4.75V ≤ VIN ≤40V; 0.2A ≤ ILOAD ≤ 3A | 4 |
| Oscillator Frequency | Fosc | 127 | 150 | 173 | kHz | 3 | |
| Max. Duty Cycle (ON) | 93 | 98 | % | VFB=0V force driver on | 3 | ||
| Min. Duty Cycle (OFF) | DC | 0 | % | VFB=12V force driver off | 3 | ||
| Current Limit | ICL | 3 | 4 | A | 3 | ||
| Output Leakage Current (Output=-1) | IL | 2 | mA | Output=-1 | 3 | ||
| Peak current | 5 | 20 | mA | VIN=40V; no outside circuit, VFB=0V force driver on | 3 | ||
| Saturation Voltage | VSAT | 1.2 | 1.5 | V | 3 | ||
| Quiescent Current | IQ | 5 | 10 | mA | VFB=12V force driver off | 3 | |
| Standby Quiescent Current | ISTBY | 50 | 200 | μA | ON/OFF pin=5V; VIN=40V | 3 | |
| ON/OFF pin threshold voltage, Low (regulator ON) | VIH | 0.6 | V | Low (regulator ON) | 3 | ||
| ON/OFF pin threshold voltage, High (regulator OFF) | VIH | 2 | V | High (regulator OFF) | 3 | ||
| ON/OFF pin Input Current (high) | IH | 12 | 30 | μA | VLOGIC=5.0V (OFF) | 3 | |
| ON/OFF pin Input Current (low) | IL | 0 | 10 | μA | VLOGIC=0.5V (ON) | 3 | |
| Supply Voltage | VIN | 40 | V | 2 | |||
| ON/OFF pin input voltage | VSD | -0.3 | V | Range -0.3~VIN | 2 | ||
| Feedback pin voltage | VFB | -0.3 | V | Range -0.3~VIN | 2 | ||
| Output voltage to ground | VOUT | -1 | V | 2 | |||
| Storage temperature | Tstg | -65 | 150 | C | 2 | ||
| Operating temperature | Topr | -40 | 125 | C | 2 | ||
| Operating voltage | VOP | 4.5 | 40 | V | 2 | ||
| Thermal Resistance Junction to case | ӨJC | 15 | C/W | Thermal resistance with copper area of approximately 3 in² | 3 | ||
| Thermal Resistance Junction to ambient | ӨJA | 70 | C/W | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | board copper area connected to this pin should be minimized. | 4 |
CAD (KiCad official)
- Symbol:
HXL1509-3.3 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hxl1509-3-3-etched.step/hxl1509-3-3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hxl1509-3-3.step/hxl1509-3-3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HXY MOSFET datasheet (8 pp, sha256
15803fe63f0afd4b, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# HXL1509-3.3
**HXY MOSFET** · DC-DC Converters · SOP-8
HXL1509-3.3 from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Positive supply input for the switching regulator, operating range 4.5V to 40V, needing a nearby input bypass capacitor to minimize voltage transients and supply switching currents. |
| 2 | Output | output | Internal power switching output that swings between (VIN - VSAT) and about -0.5V with duty cycle of about VOUT/VIN, and its PCB copper area should be minimized to limit coupling. |
| 3 | FB | input | Feedback pin that senses the regulated output voltage to complete the feedback loop, with 1.230V typical reference on the adjustable version. |
| 4 | EN | input | ON/OFF shutdown input, logic low below about 1.3V turns the regulator on and high above it shuts it down to standby, and it can be wired to ground if unused. |
| 5 | GND | power_in | Circuit ground. |
| 6 | GND | power_in | Circuit ground. |
| 7 | GND | power_in | Circuit ground. |
| 8 | GND | power_in | Circuit ground. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HXY MOSFET |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage | VOUT | 3.168 | 3.3 | 3.432 | V | 4.75V ≤ VIN ≤40V; 0.2A ≤ ILOAD ≤ 3A | 4 |
| Oscillator Frequency | Fosc | 127 | 150 | 173 | kHz | | 3 |
| Max. Duty Cycle (ON) | | 93 | 98 | | % | VFB=0V force driver on | 3 |
| Min. Duty Cycle (OFF) | DC | 0 | | | % | VFB=12V force driver off | 3 |
| Current Limit | ICL | 3 | 4 | | A | | 3 |
| Output Leakage Current (Output=-1) | IL | | | 2 | mA | Output=-1 | 3 |
| Peak current | | | 5 | 20 | mA | VIN=40V; no outside circuit, VFB=0V force driver on | 3 |
| Saturation Voltage | VSAT | | 1.2 | 1.5 | V | | 3 |
| Quiescent Current | IQ | | 5 | 10 | mA | VFB=12V force driver off | 3 |
| Standby Quiescent Current | ISTBY | | 50 | 200 | μA | ON/OFF pin=5V; VIN=40V | 3 |
| ON/OFF pin threshold voltage, Low (regulator ON) | VIH | | | 0.6 | V | Low (regulator ON) | 3 |
| ON/OFF pin threshold voltage, High (regulator OFF) | VIH | 2 | | | V | High (regulator OFF) | 3 |
| ON/OFF pin Input Current (high) | IH | | 12 | 30 | μA | VLOGIC=5.0V (OFF) | 3 |
| ON/OFF pin Input Current (low) | IL | | 0 | 10 | μA | VLOGIC=0.5V (ON) | 3 |
| Supply Voltage | VIN | | | 40 | V | | 2 |
| ON/OFF pin input voltage | VSD | -0.3 | | | V | Range -0.3~VIN | 2 |
| Feedback pin voltage | VFB | -0.3 | | | V | Range -0.3~VIN | 2 |
| Output voltage to ground | VOUT | -1 | | | V | | 2 |
| Storage temperature | Tstg | -65 | | 150 | C | | 2 |
| Operating temperature | Topr | -40 | | 125 | C | | 2 |
| Operating voltage | VOP | 4.5 | | 40 | V | | 2 |
| Thermal Resistance Junction to case | ӨJC | | 15 | | C/W | Thermal resistance with copper area of approximately 3 in² | 3 |
| Thermal Resistance Junction to ambient | ӨJA | | 70 | | C/W | | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | board copper area connected to this pin should be minimized. | 4 |
## CAD (KiCad official)
- Symbol: `HXL1509-3.3`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `hxl1509-3-3-etched.step` / `hxl1509-3-3-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `hxl1509-3-3.step` / `hxl1509-3-3.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [HXY MOSFET datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603230169235156992) (8 pp, sha256 `15803fe63f0afd4b`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text+vision), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/hxl1509-3-3-datasheet.pdf)