3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownHX83078-S
ZHHXDZ · RS-485 / RS-422 ICs · SOP-8
HX83078-S from ZHHXDZ, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output goes high when V(A) minus V(B) is at or above -50mV and goes low when it is at or below -200mV. |
| 2 | RE | input | Active-low receiver output enable: when RE is high the receiver is disabled, and when RE is high with DE low the whole chip enters shutdown. |
| 3 | DE | input | Driver output enable: when DE is high the driver output is enabled, and when DE is low the driver turns off and the output enters high-impedance state. |
| 4 | DI | input | Driver input: when DE is high, a high on DI drives A high and B low, and a low on DI drives A low and B high. |
| 5 | GND | power_in | Ground reference for the device. |
| 6 | A | bidirectional | Non-inverting driver output and non-inverting receiver input, tested with ±15kV human-body-model ESD protection. |
| 7 | B | bidirectional | Inverting driver output and inverting receiver input, tested with ±15kV human-body-model ESD protection. |
| 8 | VCC | power_in | Supply voltage for 3.3V or 5V operation; the absolute maximum rating is +6.0V and the DC characteristics are specified at 3.3V ±5%. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ZHHXDZ |
| Package | SOP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 6 | V | 2 | |||
| Bus pin A,B voltage | A,B | -8 | 13 | V | 2 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 2 | ||
| Operating temperature | TOP | -40 | 125 | °C | 2 | ||
| Power dissipation | PD | 471 | mW | SOP-8 (derate above 70 °C) | 2 | ||
| Lead soldering temperature | TLEAD | 300 | °C | 10 seconds | 2 | ||
| Input high voltage | VIH1 | 2 | V | DE,DI,RE | 2 | ||
| Input low voltage | VIL1 | 0.8 | V | DE,DI,RE | 2 | ||
| Receiver input impedance | RIN | 96 | kΩ | -7V≤VCM≤+12V | 2 | ||
| Shutdown supply current | 10 | uA | DE=GND, RE=Vcc | 2 |
CAD (KiCad official)
- Symbol:
HX83078-S - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
hx83078-s-etched.step/hx83078-s-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hx83078-s.step/hx83078-s.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ZHHXDZ datasheet (5 pp, sha256
4890c38fb3c810bd, retrieved 2026-10-28, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).